Machining test, including turning rotary ellipse and rotary parabola, agrees well with researched conclusion.
结合研究的成果，完成了对旋转椭球面和旋转抛物面等非球面工件的加工工艺实验。
Company Sets machining and assembly in one, with a comprehensive means test and improve the quality of management.
公司集机加工和装配于一体，拥有完备的检测手段和完善的质量管理。
According to the standard, the geometric precision of the small machining center should be checked before and after the load test.
根据标准规定，负荷试验前后均应检验小型加工中心的几何精度。
Test results indicate that the optimization results are rational, and it is a new way for odd-shaped pinhole machining.
试验结果表明优化结果是合理的，为异形销孔的加工提供了一条新途径。
A test system of precision machining based on virtual instrument is introduced. The theory of this test system and realization of hardware and software are discussed.
文章提出了一种基于虚拟仪器技术的精密加工测试系统，并讨论了这种测试系统的原理以及硬件和软件的实现。
The company has specialized advanced machining equipment and a full set of product-specific performance test equipment.
公司拥有专业先进的机加工设备及全套产品的专用性能检测设备。
The machining project of control cavity was set down based on the orthogonal test method, and the influence of control hole A and B on the hydraulic response of injector was tested.
根据正交试验法，制定了喷油器控制腔偶件的加工方案，并就控制A、B量孔尺寸对液力响应的影响进行了试验研究。
With the analysis and the test, it was shown that this new seal structure has the advantages of good seal characteristics, compact structure, easy machining and maintenance.
通过分析研究和试验表明具有密封性能良好，结构紧凑省材，加工简单，维护拆装方便等优点。
The FEM(finite element method) of the main shaftclamping apparatus-cutter system for DMU-70V NC high speed machining was built, and the results of the FEM were validated using dynamic test.
建立了DMU-70V五轴数控高速加工中心主轴-夹具-刀具系统的有限元模型，并利用动态测试的方法对有限元计算结果进行验证；
We have very precise stamping machines, CNC machining center and precise test machines. This makes us able to develop and manufacture many new products, which is our strength and predominance.
公司拥有精密冲压设备，CNC加工中心及精密的检测仪器，集研发生产，制造于一体，具有强大的研发与生产优势。
Upon satisfactorily completion of the required visual inspection and PWHT, the coupons shall be sent for machining for preparation of test specimens.
目视检验合格，完成后焊热处理之后，附体试片应转送加工，作为试件样品使用。
Before completing linkage screw in the machining, finished products are needed to do the pre-tensile test.
连杆螺钉在加工完成后成品交验前，要求进行预拉伸试验。
A complete processing technology is summed up for the main valve opening of the dividing control valve in the fine machining pieces based on the study and test.
通过对精密加工件分配阀体主阀孔的加工工艺试验及研究，总结了一套行之有效的加工工艺。
The early malfunction pattern is identified and the analysis of severity of early malfunction made through the test of early malfunction of the horizontal machining center.
通过卧式加工中心早期故障试验，找出其早期故障模式，进行早期故障严重度分析。
By combining with cutting test and practice, the criterion of machining of the hot spraying coating is discussed.
结合切削试验和实践，讨论了热喷涂涂层机械加工的一般原则。
According to test research situation, machining technique has been presented in terms of cutter structural parameters, cooling method for drilled holes and machining technology.
根据试验研究情况，从刀具结构参数、钻孔冷却方式、加工工艺要点等方面详细介绍了高温合金孔的加工技术。
Results showed that ferrite net and lower hardness due to low cooling rate, coarser finish machining resulted in the fracture during earlier stage of rotary bending fatigue test.
结果表明，冷却不足使组织中出现网状及小块状铁素体，导致硬度偏低，加之磨削加工痕迹较粗是引起前轮毂早期断裂的原因。
Subject for carbide wire drawing dies, it analyses the problems related to ultrasonic machining equipment, investigates ultrasonic process and introduces the production and test of dies.
本文以硬质合金拉丝模为试验研究对象，探讨了超声加工设备有关问题，进行了超声加工工艺的研究，介绍了拉丝模的生产试验情况。
According to analysing the machining technology of part, combine the original procedures which can be incorporated and test them in actual processing thus achieving automatic changing tool machining.
通过对零件的加工工艺进行分析，将能合并的工步源程序串在一起并在实际加工中得到验证从而实现自动换刀加工。
The research work, fabricating, welding, heat-input control, welding test and evaluation, heat treatment, machining and inspection of titanium distance sleeve are presented here.
介绍了钛隔离套制造工艺的研制过程，成型、焊接、线能量控制、焊接实验及评定、热处理、机加工和检验。
According to the processing performance titanium alloy materials, using a CNC machining center processing the tensile test specimen.
根据钛合金材料的加工工艺性能，采用数控加工中心加工出拉伸实验所用试件。
Based on the above purposes, a NC milling simulation system oriented to test and teaching has been developed; it achieves a dynamic simulation of the machining process.
基于上述目标，本文开发了一款面向培训、试验的曲面数控铣削仿真系统，实现了加工过程动态仿真。
Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1.
加工中心检验条件。第6部分：进给率、速度和插补精度。技术勘误1。
Sample of Test Head product that requires tubings and sheet metal bending, welding, machining, plating and painting on covers. Rough dimensions provided.
样本测试头产品，需要管材和板材折弯，焊接，机械加工，电镀，表面喷漆。提供非精确的规格。
This technology includes material selection, steel making, forging, heat-treatment and machining. The results of rolling test and inspection measurement are also presented.
包括材质的选择、钢的冶炼、锻造、热处理、机加工全套技术和上机试验与检测结果。
We provide Assembly and test as well as a complete machining system capability.
威斯·泰克提供装配、测试以及成套加工系统。
This paper presents a method to simplify the test data processing of machining precision and the plotting by using the computer programs, and through a practical example to verify its accuracy.
本文提出了用计算机程序简化对机械加工精度实验数据处理与绘图的方法，并通过实例进行验证。
The company is mainly engaged in the manufacture, machining and installation of large-scale equipment structures, special test platforms; various steel towers, grids and trusses for civil usage.
公司主要从事大型电子装备结构、专用试验平台、各类民用钢结构塔、网架、桁架等产品的生产、加工与安装。
With numerically controlled machining processing as objective for study, by the use of simulation software technology, the paper aims to test and verify the process on computer.
本文以数控车削加工为研究对象，利用软件仿真技术，在计算机上实现对数控加工程序的验证。
With numerically controlled machining processing as objective for study, by the use of simulation software technology, the paper aims to test and verify the process on computer.
本文以数控车削加工为研究对象，利用软件仿真技术，在计算机上实现对数控加工程序的验证。
应用推荐