• Dynamic optimization design is the key to improve the machining precision of machine tools.

    机床结构动态优化设计提高机床加工精度关键

    dict.cnki.net

  • In the machining, working liquid plays roles of insulation, flushing, chip-removal, cooling and it can affect cutting speed, surface roughness, machining precision and so on.

    工作加工绝缘洗涤、排冷却作用,对切割速度表面粗糙度加工精度影响

    blog.163.com

  • Abstr: Beam guide rail is an important supporting component of gantry boring - milling machine, the straight - ness accuracy affects machining precision of the parts directly.

    文章摘要横梁导轨龙门铣床重要支撑部件直线精度直接影响工件加工精度

    www.redlib.cn

  • Proceed from design method to raise design efficiency, reduce machining cost, improve machining precision, advance emergency capability of enterprise.

    设计方法入手提高设计效率减少加工成本提高加工精度提升企业应变能力

    www.chemyq.com

  • By the principle known Processing, the plane guarantee precision machining holes than guarantee the machining precision easy.

    加工工艺原则可知保证平面加工精度要比保证加工精度容易

    auction1.paipai.com

  • During programming for the trough and cavity, programming of arc method is used for some typical positions of trough and cavity to improve the machining precision.

    编制型腔加工数控程序过程,针对型腔典型部位采用趋近圆弧编程方法进行编程提高加工精度

    dict.cnki.net

  • As a result of using the cone sharpening method sharpening drilling cutter's Flank, improving surface quality and machining precision, extending the lifetime of the drilling cutter substantially.

    采用锥面磨削刃磨刀具面,可显著提高刀具使用寿命,有利于保证工件加工精度提高工件表面质量

    www.dictall.com

  • The main factors that affect the machining precision and surface quality in high-speed wire cutting are analyzed. And the corresponding effective precautionary measures and handling methods are given.

    分析了高速走丝线切割加工影响加工精度表面质量主要因素针对这些原因分别给出各自有效预防处理方法

    dict.cnki.net

  • The machining precision can be improved and the dimension scope of machining the polygon prism is enlarged by using the proposed compensation method.

    采用这种误差补偿方法可以大大地提高车削多面体精度扩大车削多面体尺寸范围

    dict.cnki.net

  • To locate, we need the locating criteria, whether a suitable locating criterion is chosen or not will directly influence the machining precision.

    定位需要定位基准定位基准选择是否合适直接影响零件的加工精度

    www.chemyq.com

  • The surface machining precision of the accessories is denoted by relevant parameters, such as the parameters of surface roughness, the parameters of ripple, the parameters of shape error and so on.

    零件表面加工精度相应参数来表征,例如表面粗糙度参数波纹度参数形状误差参数

    dict.cnki.net

  • The calculative precision of the cutting breadth has a significant effect on the machining precision and the machining efficiency for free-form surface machining.

    自由曲面加工中,行距计算精度直接影响曲面加工精度加工效率

    dict.cnki.net

  • In this paper, according to the characteristics of electrochemical micromachining (EMM), the impact factors of micro-hole array machining precision are analyzed.

    电解加工特点出发,影响微细阵列加工精度因素进行了分析

    www.dictall.com

  • For the varied deep screw is widely used for the plastic extruder at the present time, but its machining precision is high.

    不等螺杆目前广泛用于塑料挤出机加工精度要求

    www.chemyq.com

  • A few measures is introduced in this paper to decrease the influence of human factors on the machining precision.

    主要讲述人为影响零件加工精度比例减小几点措施

    www.chemyq.com

  • An example of analytical calculation of machining precision is given in the paper.

    本文列举了加工精度分析计算实例

    dict.cnki.net

  • The cutting temperature play an important role in the high speed cutting process, concerning about the tool wear, workpiece surface integrity and machining precision.

    切削温度刀具磨损工件加工表面完整性加工精度密切相关

    www.chemyq.com

  • The definition and importance of machining precision is given, measurement method, measurement instrument and system is discussed respectively.

    介绍了制造加工精度定义重要意义,对制造加工精度检测方法检测仪器系统进行了分析讨论

    www.dictall.com

  • The diamond reamer has such advantages as higher machining precision, minimum surface roughness, higher efficiency and longer service life.

    金刚石铰刀具有加工精度表面粗糙度小、加工效率寿命优点,能很好满足高精度内孔加工的要求。

    www.dictall.com

  • The cutting temperature is simulated by employing the finite element method, providing a basis for the improvement of machining precision of parts.

    用有限元模拟温度分布提高零件加工精度提供了依据

    www.chemyq.com

  • The error analysis indicates that the machining precision could be guaranteed just only selecting the reasonable parameter.

    误差分析表明只要合理选择参数增量保证所要求加工精度的要求。

    www.fabiao.net

  • It is the machining precision that limits the commercialization and industrialization of the Parallel Machine Tools (PMTs) greatly.

    并联机床加工精度问题目前限制并联机床商业化产业化主要瓶颈。

    www.fabiao.net

  • So we can chouse the fast speed combination that under the control of machining precision.

    满足加工精度要求前提选取加工速度最大工艺参数组合

    www.fabiao.net

  • The principle, advantages and disadvantages, machining precision, and applications of MEMS processing technology are described.

    阐述了这些MEMS加工技术工艺原理优缺点加工精度应用等

    lib.cqvip.com

  • A machining centre should have high positioning accuracy to ensure its machining precision.

    加工中心机床必须具有定位精度保证机床加工精度

    dict.cnki.net

  • The main components such as body, crossbeam, column etc. were through aging treatment, so they have good stability and high machining precision.

    床身、横梁立柱主要部件经过时效处理稳定性加工精度高

    www.shengyidi.com

  • The difficult problem is satisfactorily solved. The machining precision and the surface quality reach the design requirements.

    初步解决了加工难题加工精度表面质量符合设计要求

    www.chemyq.com

  • Adopting the computerized Numerical Control Technique to machine the breakage groove of torshear type bolts can improve the machining precision of groove, guarantee the assembled quality.

    扭剪螺栓沟槽加工采用数控技术提高沟槽加工精度确保配套质量

    www.chinafastener.biz

  • Adopting the computerized Numerical Control Technique to machine the breakage groove of torshear type bolts can improve the machining precision of groove, guarantee the assembled quality.

    扭剪螺栓沟槽加工采用数控技术提高沟槽加工精度确保配套质量

    www.chinafastener.biz

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定