Familiar with cost analysis of machining foundry etc. technology.
熟悉机加、铸造等加工工艺的成本分析。
As more and more application of high property materials and decrease of machining term, high performance cutting methods are extensively studied recently for lowering the cost of machining.
伴随着高性能材料的越来越多的应用和加工周期的不断缩短，为降低制造成本，高效加工方法成为当前研究的热点。
Whether the tool path quality is good or bad will directly affect the machining and the machining cost of part.
刀具运动轨迹设计质量的好坏，将直接影响零件的加工质量及加工成本。
Therefore, machining technics is complex and requirement is high, which cause the cost of machining is high.
因此，传统栅式位移传感器制造工艺复杂，加工要求很高，相应地制造成本也很高。
Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can't satisfy the practical production.
由于目前的加工方法主要是机械光整加工，存在着加工质量差、生产率低、成本高的问题。
It is meaningful to take machining and cost during the calculation of torque, which provide a criterion in the design of hybrid stepping motor.
可见在转矩的计算中考虑加工和成本将给混合步进电机的设计提供一个有意义的判断依据。
Familiar with cost analysis of machining foundry etc. technology.
熟悉机加、造等加工工艺的成本分析。
It considered the materials, matching parts and machining cost in this analysis.
分析中考虑了材料、配套件、加工费用等几个主要因素。
The process plan is the technology foundation of part machining, and takes guidance for the part manufacture, and decides the productivity and the manufacturing cost of the part.
工艺方案是零件加工的工艺基础，对零件的生产制造过程起指导性作用，决定着零件的生产率和制造成本。
Proceed from design method to raise design efficiency, reduce machining cost, improve machining precision, advance emergency capability of enterprise.
从设计方法入手，提高设计效率，减少加工成本，提高加工精度，提升企业的应变能力。
If only reasonable parameters are selected, the grinding ratio with vitrified diamond wheel is lower and the machining cost is lower.
只要采用合理的加工参数，陶瓷结合剂金刚石砂轮研磨单晶金刚石磨耗比低、加工成本低。
To produce dies of high quality and low cost within short period, integrated machining method and machining process must be required.
要做到在短的周期内生产出高质量低成本的模具，就要有较完善的加工手段和加工工艺方案。
The research adopts existing and mature CNC technique which has advantage in price in producing the low cost CNC turning machine featuring the function of machining these special threads.
作者研究采用现有的、成熟的、有价格优势的数控技术，经过一些专门的处理，研发了具备加工这类特殊螺纹功能的低价专用数控车床。
The machining cost of barrel cam is decreased by improving the CNC programming method for milling of barrel cam, and the method can meet the request of cam groove width precision.
通过改进圆柱凸轮数控铣削加工编程方法，降低了圆柱凸轮的加工成本并能满足凸轮槽宽的高精度要求；
The object function of the model is the sum of manufacturing cost and quality loss. The machining capability and function requirement were given as the restriction conditions.
该模型以制造成本与质量损失成本之和为目标函数，以加工能力和功能要求为约束条件。
As one of the advanced manufacturing technologies, high speed cutting technology can improve the machining quality and efficiency enormously, and can reduce machining cost.
作为先进制造技术，高速切削技术能大幅度地提高加工品质和加工效率，并能降低加工成本。
Whether the tool path quality is good or bad will directly affect the machining quality and the machining cost of parts.
刀具运动轨迹设计质量的好坏，将直接影响零件的加工质量及加工成本。
The experiment results show that the optimized milling cutter and its parameters can improve the machining quality and efficiency and reduce machining cost efficiently.
结果表明，采用该系统优选的铣刀及其切削参数进行高速铣削加工，能有效提高加工品质和加工效率、降低加工成本。
It makes work quality stable and reliable, labor productivity improved and production cost lowered down by using reasonable machining line and method, and adding some special jigs.
通过采用合理的加工路线和加工方法，增加适当的专用工装，不仅使加工质量稳定可靠，而且提高了劳动生产率，降低了制造成本。
Honing with a honing gear is an efficient and low - cost method for hard gear machining, but it can not obviously improve the precision of gear.
外啮合珩齿工艺是一种效率高、成本低的硬齿面齿轮加工工艺，但对齿轮精度的提高有限。
In holes machining, the total machining costs include tool cost, machining cost, un-tool traveling time and switching tool cost.
在孔群加工中，总加工成本由刀具成本、加工成本、非加工刀具行进时间、刀具换刀成本组成。
As a kind of typical hard machining materials, owing to its abrasion resistance and low cost, high manganese steel is widely used for those components that bear great impacts.
高锰钢是一种典型的难加工材料，因其优良的耐磨性和低廉的价格，被广泛用于制作受冲击较大的零部件。
Cutting with magnetic field is enable to make cutting force shrinking, longer tool life, lower cost and machining quality improved obviously.
带磁切削能有效减小切削力，提高刀具耐用度，改善表面加工质量。
Compared with the traditional assembling camshaft, this assembling camshaft have the advantages of lighter weight, lower machining cost, better utilization of materials, etc.
装配式凸轮轴与传统凸轮轴相比具有重量轻、加工成本低、材料利用合理等优点。
The relations between design feature, machining feature and cost feature are studied. Cost estimating model based on feature mapping and its application method are presented in concurrent engineering.
研究了设计特征、工艺特征和成本特征之间的相互关系，按照并行工程思想，提出了与设计进程并行的基于特征映射的成本估算模型，研究了模型的实现方法。
The application of compound machining technology, no matter from the technology, progress, cost, quality, etc are one of the best choice.
复合加工的应用，无论从工艺、进度、成本、质量等方面都是一个最佳选择的方案。
Abrasive Airjet machining has many advantages, such as high machining versatility, almost no heat generated and low machining cost.
磨料气射流加工技术具有工艺适应性强，没有热影响，加工成本低等优点，是加工硬脆难加工材料的理想加工技术。
Abrasive Airjet machining has many advantages, such as high machining versatility, almost no heat generated and low machining cost.
磨料气射流加工技术具有工艺适应性强，没有热影响，加工成本低等优点，是加工硬脆难加工材料的理想加工技术。
应用推荐