Clear yellow to enable the operator to see more clearly and control the machining condition.
清澈淡黄色，使操作人员能看清楚加工情况及更容易控制加工。
The adaptive cut can make cut process at optimum condition all along, in case the machining conditions are constantly changing.
自适应切削可以保证在加工条件不断变化的情况下使切削过程始终处于最佳状态。
Tool condition monitoring is the key technique in automatic and unmanned machining process.
刀具状态监测是实现自动化加工和无人化加工的关键技术。
HEAT TREAT: Process used on most alloy steels to provide desired metallurgical properties and to put them in the most suitable condition for machining or other subsequent operations.
热处理：用于使大多数合金钢产生期望的金相组织特性并把这些组织处于为机加工或者后道工艺最适宜的状态的一种工艺。
It proves that this prediction model is effective by machining experiments. Using prediction model can predict and control surface roughness under certain condition.
经加工试验证明了该表面粗糙度预测模型的有效性，从而实现加工前在确定切削条件下预测和控制表面粗糙度的目的。
On the bases of analysis for motion regularity and damage condition, a method for taper machining of cross shaft journal is proposed to reduce journal damage.
在分析运动规律和损坏状况的基础上，提出把十字轴轴颈加工成锥度的办法减轻轴颈损坏。
Specification of optical backing plate technical condition directly affects its performance and machining efficiency.
光胶垫板技术条件的给定，直接影响到光胶垫板的使用性能和加工效率。
The processing of deep hole can adopt electrical discharge machining under present condition and self-fabricate relevant facilities to meet parts requirements.
深小孔的加工，可采用高速电火花加工，在现有条件下，自制相关的工装，达到零件要求。
To adopt usual way machining gear with small module and a few teeth, it is easy to emerge gear undercut, thus, it reduces the intensity of teeth and worsens the mesh condition.
按常规方式加工小模数少齿数齿轮，容易出现齿轮根切现象，致使齿轮轮齿强度降低、齿轮啮合条件恶化。
The dynamic statistic controller formed by this principle enables the machining process is always under the condition of diagnostics and regulation.
由此原理构成的动态统计控制器使加工过程始终处于工序诊断和工序调节状态。
Unlike the traditional constant scallop height tool-path planning method, it produces the optimal machining efficiency under the condition of ensuring the tool-path smoothness.
与以往的等残留高度刀具轨迹规划方法不同的是此算法在保证刀具轨迹光顺的前提下使加工效率达到最佳。
Optimization of cutting path in complex shape machining of CNC machine tools under high speed and accuracy condition is a crucial problem.
走刀轨迹的优化对复杂型面的高速高精度加工起着十分关键的作用。
It is well-known that machining efficiency doesn't depend on the machine power and the load which machine can bear, but depends on the condition in which self-excited vibration appears.
机床的切削效率往往不是由机床的功率、机床所能承受的最大载荷所决定，而是由机床切削时发生自激振动的条件所决定。
Precisely monitoring the gap condition is important for the machine control system to maintain a stable and high efficient machining process.
加工间隙放电状态的检测是电火花加工控制系统的一个关键环节。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
The valuable hybrid cell will be obtained by the space microgravition condition. It will provide credible foundation for cultivation new breeds, machining biologics and pharmacy in the future.
今后有望利用空间微重力条件获得有价值的杂合细胞，培育作物新品种，为开展空间生物加工和空间制药提供良好基础。
The milling force model is validated according to cutting experiments and it can offer a reliable boundary condition for the further study of NC machining distortion of aviation aluminum-alloy.
采用合理的平均力试验验证了模型的有效性，为进一步研究航空铝合金数控加工变形提供了可靠的边界条件。
According to prediction and aimed at the fastest machining rate, machining parameters are optimized on the condition that parts' surface roughness is ensured.
根据预测结果，在保证表面粗糙度要求的前提下，以最大加工速度为目标，用遗传算法实现加工参数的优化。
The general calculation formulas and differential approximate calculation ones are deduced, and the different machining occasions applying those jigs in condition of different demand o…
推导了三种钻模定位误差的通用计算公式和微分近似计算公式，提出了在不同定位误差要求下三种定位钻模适用的加工场合。
The machining status of the NC machine tool is sampled and displayed in real time. So the operator can control the machine tool according to the actual condition.
该系统可将数控机床的加工状态实时采集并显示，让操作者通过计算机可以直接观看到机床的加工情况，从而根据实际情况对机床进行控制。
On condition that the approximate error was in allowable range, the optimization algorithm to fix cycloid parameters was given for the objective of the highest machining efficiency.
在保证逼近误差限制在允许范围内的前提下，以加工效率最高为目标，提出了确定摆线参数的优化算法。
Reciprocating feed WEDM, which consumes less time and wire electrode, is independently developed machining method originated according to China's national condition.
而往复走丝电火花线切割加工是我国基于本国国情自行研发并普遍应用的经济高效型电火花线切割加工方式。
Reciprocating feed WEDM, which consumes less time and wire electrode, is independently developed machining method originated according to China's national condition.
而往复走丝电火花线切割加工是我国基于本国国情自行研发并普遍应用的经济高效型电火花线切割加工方式。
应用推荐