The system has the general function of universal CNC system and can realize the jog control and moving interpolation. The products of the machine tool machining accord with requirements of customer.
构建的数控系统具有通用数控系统的一般功能，能实现点动和插补运动，机床加工的产品符合客户技术要求。
It will save considerable machining time to use more than one tool in one machine to perform several machine operations either in sequence or simultaneously.
在一台机器上使用数种刀具来顺次或同时进行几项机器操作，将节省大量加工时间。
The machine decodes the punched information and electronic devices activate the various motors on the machine tool, causing them to position the work and follow specific machining instructions.
机器会解码打孔信息和电子设备来驱动各种机床上的电动机，并由解码后的信息来定位和之后的特殊加工指令。
The feature of machining harden steel by means of EHM are: it can utilize the carbide tool to machine the harden steel in engine lathe.
采用导电加热切削技术切削淬硬钢的特点在于：可以采用普通机床、硬质合金刀具对淬硬钢进行硬车削加工。
May set up and program machine tools for use by machining tool operators.
可为模具操作员应用的机床设置和编写程序。
The machining of Variable-axis NC Machine Tool is influenced by its accuracy directly.
变轴数控机床的精度直接影响着其加工能力。
To achieve compound machining by utilizing multiple spindle nc machine tool is one of the most popular international machining technology, and it belongs to advanced manufacturing technology.
利用多轴数控机床实现复合加工是目前国际上流行的加工工艺之一，属先进制造的一种。
The portable machine tool is a site machining equipment.
便携式机床是现场加工设备。
Cutting teeth of noncircular gear is very difficult when without special machine tool for machining of noncircular gear.
在没有专用加工非圆齿轮机床的条件下，非圆齿轮的切齿问题是个难题。
This, together with the fact that a milling machine is a very versatile machine tool, makes the milling machine the backbone of a machining workshop.
连同铣床是极通用机床的事实，使得铣床成为机加工车间的支柱。
While machining turbine blade simply by Parallel machine Tool (PMT), NC program development is often limited by workspace of PMT, and it is difficult to process at the best posture.
用并联机床加工汽轮机叶片时，往往受其工作空间的限制而不能在最佳的切削姿态下进行加工。
Sapphire dome machining technology is introduced by exploring grinding tool and milling and polishing film and supplement material and machine speed and pressure etc.
分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。
Especially the numerical control machine tool has a great influence on the dynamic balance of the tool in high speed machining.
特别是数控机床在高速加工时工具的动平衡性所产生影响很大。
The tooth side slack of the gear influences the machining accuracy of NC machine tool directly, so, taking out the slack of feed drive gearing is an important item in the machine tool rebuilding.
齿轮的齿侧间隙直接影响数控机床的加工精度，因此，进给系统传动间隙的消除是机床数控改造的一项重要内容。
To realize machining error compensation, it is necessary to measure the rotation error of machine tool spindle correctly.
本文提出了一种机床主轴回转误差补偿信号的实时测量方法。
How to set the tool length compensation parameters is the difficulty in operating NC milling machine or machining center.
如何设置刀具长度补偿参数一直是数控铣床和加工中心编程和操作中的难点。
In this paper influence of geometric excentric ball track of rolling bearing of spindle of machine tool on machining accuracy of workpiece is discussed.
文章讨论了机床主轴滚动轴承滚道的几何偏心对工件加工精度的影响。
Actual machining process of parts, machine tool, clamp and cutter was displayed and simulated dynamically in machining process.
在加工过程中动态显示及模拟零件、机床、夹具及刀具的实际加工过程。
Taking advantage of direct curve interpolation, CNC machine tool can achieve higher precision and machining quality.
在数控机床中，对解析函数曲线进行直接函数插补运算，可以得到高的精度和加工质量。
It may not only be used to design machine tool, but to describe machining process.
它不仅可以用于机床的设计，也可以用于描述加工过程。
The testing results showed that the rise-temperature of spindle bearings can be reduced, the thermal stability of spindle axis and the machining accuracy of machine tool can also be improved.
试验结果表明，这种热管不但能降低主轴轴承的温升，而且可大大提高主轴轴线的热稳定性，从而提高机床的加工精度。
The finish machining can be completed in one machine tool by milling and rolling.
通过铣削和滚压，在一台机床上完成球面精加工。
By computer simulation of machining we can check the correctness and rationality of NC programming, and avoid the collision between machine tool and blade or fixture.
通过加工仿真，以检查数控程序的正确性、合理性，避免加工设备与叶片和夹具等的碰撞。
And the static and dynamic systems of Servo system affect positioning speed, positioning accuracy and machining accuracy of numerical control machine tool directly.
而伺服系统的静态、动态性能直接关系数控机床的定位速度、定位精度和加工精度。
In order to use electro discharge machining (EDM) technology to manufacture micro-machines, analyzed the key technologies of micro EDM, and developed a micro EDM machine tool.
为了将电火花加工技术应用到微机械制造中，分析了微细电火花加工中的关键技术，开发了微细电火花加工机床。
The influence of material properties, machine tool system and diamond grinding wheel etc. on the machining quality of advanced ceramic components during grinding process is analyzed.
分析了高性能陶瓷零件磨削加工过程中，工件材料、加工机床性能、金刚石砂轮等方面参数对零件加工质量的影响。
LS-WEDM plays an important role in the field of high-precision mould manufacture, shaped tool machining, hard-machined material and the machine of precise complex part.
慢速走丝线切割加工技术在高精度模具制造、成形电极丝加工、难加工材料和精密复杂零件的加工中占有重要的地位。
The better moving stability, the higher positional accuracy and the 5-axis machining of the proposed machine tool have been proved by the experiment.
加工试验表明，该机床具有良好的运动稳定性和较高的位置精度，可实现5坐标加工。
The better moving stability, the higher positional accuracy and the 5-axis machining of the proposed machine tool have been proved by the experiment.
加工试验表明，该机床具有良好的运动稳定性和较高的位置精度，可实现5坐标加工。
应用推荐