This paper is about development of vane ECM machine tool control system based on PLC.
本论文介绍了基于PLC控制的叶片电解机床控制系统的设计。
People have to use the digital logic circuit "build" into a special computer numerical control machine tool real as a system, the hardware connecting numerical control, or not numerical control (NC).
人们不得不采用数字逻辑电路“搭”成一台机床专用计算机实作为数控系统，被成为硬件连接数控，简称未数控(NC)。
This article mainly introduces the design thought of PLC applying for Tang Xi Modular Machine Tool electronic control system.
本文对可编程序控制器应用于镗铣组合机床电气控制系统的设计思想作了介绍。
This article introduces an available control system for the huge hydraulic press machine tool by means of a personal computer (PC) as the main controller.
本文介绍了一个采用个人电脑（PC）作为工业控制系统的主控机来控制大型锻压机床的成功例子。
It's proved by practice that this system could completely meet the request of modern numerical control machine tool for open numerical control system.
实践证明，该系统完全能满足现代数控机床对开放式数控系统的要求。
A measurement system, including probe, control box, camera and computer is embed into the CNC machine tool. This makes it possible that the machine tool have measuring function.
在数控机床上附加测量头、控制盒、摄像头及计算机装置组成的测量系统，使数控机床具有一定的检测功能。
Servo feeding system is part of CNC machine tool, the control precision is very important.
机床进给伺服驱动系统是数控机床的重要组成部分，控制精度是非常重要的指标。
In this paper a fluidics device of continuous-path numerical control system for electrical spark machine tool is presented.
文章介绍了用于电火花线切割机床连续轨迹式数字程序控制的射流装置。
This paper presents two-degree-of-freedom robust control for permanent magnet linear servo system of numerically controlled machine tool.
对数控机床直线伺服系统提出二自由度鲁棒控制。
Virtual axis machine tool, Structural Form, Kinematics Analysis, Control System.
虚拟轴机床，结构型式，运动学分析，控制系统。
In this paper, a heavy-duty machine tool factory is taken as a case, to research the setup of the administrative and control system of network style in manufacturing system.
以某重型机床厂为例，探讨了在生产制造系统中建立“网络化的层级组织”管理控制体系的做法。
A new reconfigurable microminiature tool storage control system is designed and applied on reconfigurable microminiature numerical control machine tools.
设计了一种应用于数控机床的可重配置微小型刀库控制系统。
This article introduces the design and realization of the control system for electrical spark linear incising machine tool.
本文介绍了电火花线切割机床的微机控制系统的设计与实现；
The texturing system includes four parts: laser source, control system, texturing machine tool and coolant system.
该毛化设备主要包括激光光源、控制系统、毛化机床、冷却系统等四个部分。
Recently, position servo control system has been widely used in most fields like NC machine tool, machining center, robot etc.
近年来，位置伺服控制系统已经在精密数控机床、加工中心、机器人等领域得到了广泛的应用。
The modularized design for a CNC machine tool includes two aspects which are mechanical structure and electric control system.
数控机床的模块化设计包括机械结构的模块化设计和电气控制系统的模块化设计两部分。
This paper discusses the hardware configuration and the PLC software design in the electrical control system of a piston ring profile lathing and milling combined machine tool.
本文对活塞环仿形车、铣组合机床电气控制系统中硬件配置及PLC的软件设计特点进行了探讨。
The work principle, structure design and control system tor double guide frame WEDM machine tool are introduced.
简述了双线架线切割机的工作原理、结构设计和控制系统。
The position accuracy of machine tool is directly affected by the servo-control method which should be properly selected to ensure the high position accuracy of a CNC system.
伺服控制方法是影响机床定位精度的关键因素之一，要保证数控系统的高定位精度，应采用合理的伺服控制方法。
A new method of IP robust controller design for NC machine tool droved by linear servo system was presented based on robust control theory.
对数控机床直线伺服系统IP控制器提出用鲁棒控制理论进行设计的新方法。
In precision machine tool servo control system, the existence of non-linear backlash element is the main factor that affects the performance of the control system.
超精密机床伺服系统中，间隙非线性环节是影响系统性能的主要原因。
In a numerical control machine tool, servo system is an important part.
在数控机床中，伺服系统是重要组成部分。
In this paper a kind of multi-freedom dynamic modeling method of numerical control machine tool feeding transmission system is introduced.
本文给出了数控机床进给传动系统的一种多自由度动力学建模方法。
Comparing with traditional CNC system, the proposed scheme has not only the simple machine tool structure and control system, but also the easy user's programming.
相比传统的数控系统，既简化了机床结构和控制系统，又简化了用户的编程工作。
The paper introduced the numerical control system of tool grinding machine operated by a cheap microprocessor, the interpolation algorithm of its plane contours, and related hardware as well.
介绍了廉价的微处理器刀具磨床数控系统，及其产生平面轮廓的插补算法，以及相关硬件。
And the static and dynamic systems of Servo system affect positioning speed, positioning accuracy and machining accuracy of numerical control machine tool directly.
而伺服系统的静态、动态性能直接关系数控机床的定位速度、定位精度和加工精度。
The control system in dual CPU controlled electric machine tool is introduced in this article.
主要介绍双CPU控制电加工机床的控制系统。
This measure system is suitable to measure linear and Angle displacement during manufacturing process of NC machine tool, and it can constitute closed loop control system with CNC system.
该测量系统适用于测量数控机床加工过程中的直线位移和角位移，可以和CNC系统组成闭环控制系统。
This measure system is suitable to measure linear and Angle displacement during manufacturing process of NC machine tool, and it can constitute closed loop control system with CNC system.
该测量系统适用于测量数控机床加工过程中的直线位移和角位移，可以和CNC系统组成闭环控制系统。
应用推荐