The straightening machine checks the mechanical fasteners and the hydraulic transmission system during the shift, the operation handle and button can be normal.
矫直工在交接班时先检查机械紧固件和液压传动系统，操作手柄及按钮能否正常。
According to the production ability of small workshop, the selection and determination of structural parameter and technological parameter for straightening machine are discussed.
根据小型车间生产能力，论述了矫直机结构参数和工艺参数的选择与确定。
Also a simple and practical subsidiary roller table structure design case of the pipe pressure straightening machine is shown.
对压力矫直机进出料辅助辊道结构设计给出了一个简易实用的示例。
This paper expounded the operating principle of automatic straightening machine for a shaft workplace and the design of hardware and software for its three main parts.
本文阐述了轴类工件自动校直机的工作原理及其三个重要组成部分(自动检测、工件定位和压头驱动)的硬、软件设计。
This machine is suitable for straightening and cutting on steel wire, iron wire, stainless steel wire and other metal wire (round, square, flat wire, etc.).
本机适用于钢线、铁线、不锈钢线等各种金属线材(圆、方、扁线等)的调直和切断。
A straightening machine controller based on embedded technology is introduced in this paper.
本文介绍了基于嵌入式技术的自动校直机控制器的设计。
The paper, combined with the 45~76 straightening machine designed, provides a theoretical method for designing the straightening roll camber.
结合已设计出的45～76焊管生产线中的六辊矫直机，阐明了矫直辊辊型设计的一种方法。
To improve the precision and the efficiency in straightening drill pipes, we make a research in the control system of the automatic hydraulic straightening machine.
为了提高钻具校直的精度与效率，我们进行了全自动液压校直机控制系统的研究。
The hydraulic-servo system of the precise straightening machine is the executive body and is the essential condition to realize straightening technics.
精校机液压伺服系统是精校机的执行环节，是实现校直工艺的必要条件。
The straightening principle and the calculation method for the force and power of this straightening machine is discussed.
并论述了该矫直机的矫直原理及力能参数的计算方法。
Based on the model of straightening process, theoretical basis of formula calculating straightening amount was analyzed. It is helpful for design and development of automatic straightening machine.
根据校直过程模型，对现有校直修正量的计算公式进行了理论分析，为自动校直机的开发研制提供了技术支持。
The paper introduces the process automation model specification system of heavy and medium plate rolling production line hot straightening machine in TangShan heavy and medium plate Co.
介绍唐山中厚板公司中厚板轧钢生产线热矫直机过程自动化模型设定系统的组成、主要数学模型。
Its control requirement is high and difficult. Its performance has a great influence on the performance of precise straightening machine.
它控制要求高、难度大，其性能对精校机的性能影响很大。
Thread one of Straightening machine series Roller Straightening hyperbola principle, thus greatly weakened the scratch of the reinforcement.
其中螺纹系列调直机采用双曲线辊调直原理，从而大大消弱了对钢筋的划伤。
Straightening machine is a metal bar, pipe, wire, and other equipment for straightening.
矫直机是对金属棒材、管材、线材等进行矫直的设备。
Straightening roller straightening machine through the bars of pressure for them to change, such as straightness.
矫直机通过矫直辊对棒材等进行挤压使其改变直线度。
The straightening machine runs well and can achieve the technical motions and control demands during site debugging, which prove that the design and control scheme is feasible.
通过现场调试情况，该矫直机运行良好，可顺利完成工艺动作和各项控制要求，验证了系统设计和控制方案的合理性。
The mechanical structure of the straightening machine was designed, including the detect and locate system, the straighten system, the automatic loading and discharge system and so on.
在理论分析的基础上，根据校直过程的工艺流程和要求，完成了自动校直机的机械设计，主要包括检测与定位系统设计、加载校直系统设计、自动上下料系统设计。
Optimization design on the roll array was done by taking two straight segments in the straightening machine.
采用了先进的具有两个连续矫直段的连铸机辊列曲线，对辊列进行优化设计。
Based on the model, the straightening stroke can be calculated, so it is solved to apply FEM to automatic straightening machine.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
Simultaneously, the curvature before straightening also affects the size of force on straightening, and it also affects the life span of straightening machine deeply.
同时，钢轨的矫前弯曲度还影响矫直力的大小，进而影响矫直机的寿命。
The straightness error mathematics model has been built, then the measuring and controlling system of redirector rack automatic straightening machine has been developed.
建立直线度误差的数学模型，研制全自动校直机测控系统，并用于轻型汽车和轿车的转向器齿条的检测和校直。
The machine has such advantages as simple structure, convenience to adjust and good straightening effect, it can meet the needs of consumers for steel wire's straightness.
该旋转矫直设备结构简单，调整方便，矫直效果好，能满足用户对钢丝平直度的要求。
The force and performance of this straightening machine are analyzed and calculated for designing.
对矫直力能参数进行了分析计算，可为设计矫直机提供参考。
YW42 series hydraulic straightening machine is suitable for heat treatment plant, steel plant, the use of plants for tube industry.
YW42系列液压校直机适用于：热处理厂，钢管厂，制管厂等行业使用。
Also involved are the straightening-reeling process, reeling machine specification, selection of machine type as well as the properties of the pipes after reeling.
介绍了矫直松棒工艺和松棒机的规格、机型选择以及松棒后管子的性能等。
Abstract: Abstract: CNC Frame Bending Machine is mainly used for bending, straightening of ship frame, and also it is a smart equipment for frame edge cutting and pneumatic printing.
摘要：数控肋骨冷弯成形机主要用于船体肋骨等构件的冷弯加工、校平和校直工作，并能进行端切划线、气动打印特定符号等任务的智能设备。
Combining the feeding and straightening function into one machine, saving space and suitable for thin metal sheets processing.
本机特点为材料架与矫正机成一体，不占空间，适合薄板加工。
Combining the feeding and straightening function into one machine, saving space and suitable for thin metal sheets processing.
本机特点为材料架与矫正机成一体，不占空间，适合薄板加工。
应用推荐