A compact lumped model is used to simulate the characteristic of the integrated inductance.
采用一个紧凑集总电路模型来等效模拟集成化电感的电路效应。
The transition process model of fluid catalytic cracking unit (FCC) is achieved based on the seven lumped model, whose validity is verified by an example.
以催化裂化装置为例，在七集总模型基础上化简得到催化裂化装置的过渡过程模型，并验证了其有效性。
Establishes a dynamic lumped parameter model for air cooled heat pump under frosting condition. Divides frosting course into accumulation of density and frost thickness.
建立了结霜工况下空气源热泵集中动态参数模型，将结霜过程分解成密度项的累计和霜层厚度项的累计。
G. Fung et al. Results the modulus and phase simulated by the nine-element lumped parameter model could fit the goal input impedance well.
结果三弹性腔九元件集中参数模型模拟出的输入阻抗模和幅角与目标输入阻抗模和幅角能较好的吻合。
On the basic data of obseved water level, the physical behaviour of the Hamar geothermal field was simulated using a Lumped parameter model.
本文采用一种集总参数模型模拟计算了地热系统的物理状态和参数。
The compressor model was based on the steady lumped parameter method.
以稳态集中参数法建立了压缩机模型；
The continuous model is adopted in the torsional vibration frequency and resonance of shaft system, the lumped parameter equivalent applied in the sub-synchronous resonance.
轴系扭振频率和响应计算采用连续质量模型，次同步谐振特性分析采用集中质量模型。
Traditional fault analysis methods for transmission line mostly adopt lumped parameter model, so the distributed parameter characteristic of real transmission line can't be reflected at all.
传统的故障分析法多采用集中参数模型，无法反映真实线路的分布参数特性。
So far the theoretical study and practical design of the control of continuous rolling mills have been substantially based on lumped parameter model.
迄今连轧控制的理论研究和实际设计大都基于集中参数模型。
The system model comprises the dynamic heat exchanger model based on the lumped parameter method and moving phase boundary method, and the stable flow models of compressor and expansion valve.
系统模型中包含了用集总参数和相移动边界法建立的热交换器动态模型，以及压缩机和膨胀阀的稳态流动模型。
In this paper, a new lumped elements latchup model consisting of four bipolar transistors is used to analyze the latchup effect of CMOS inverters in transient radiation environment.
本文采用较全面的包括四个寄生双极晶体管和MOS管的闩锁模型，详细分析了瞬态辐照下CMOS反相器的闩锁效应。
Lumped parameter equivalent model is adopted in the shaft system torsional vibration model and the whole shaft system are divided into 6 parts.
轴系扭振模型采用集中参数等值模型，整个轴系分为6段。
The dissertation presents the principle of dielectrometry and its disturbance factors, and the methods to obtain the complex permittivity with a lumped circuit model.
论文详细介绍了介电测量技术的原理及影响因素，并用集总电路模型求解被测绝缘纸板的复介电常数。
This paper presents a new mathematical model for calculating the coupled torsional-axial vibration with non-linear stiffness for a lumped spring-mass shaft system of internal combustion engine.
本文提出了一种具有非线性刚度的弹簧一质量模型，用于计算内燃机轴系的扭转—纵向耦合振动。
The method and the process to establish lumped kinetic model of tetralin hydrocracking have been discussed according to the mechanism of pseudo first order reaction.
按照加氢裂化拟一级反应机理，论述了建立四氢萘加氢裂化集总动力学模型的方法和步骤。
The Resistivity measurements of rock in lab are generally based on the lumped circuit model, so the effect of cable is usually neglected.
目前实验室测量岩石复电阻率一般都采用集总电路模型，没有考虑测量电缆的影响。
It is expected that the general lumped-parameter model will improve the dynamic foundation design.
计算结果表明，论文提出的一般集中参数模型有望改进基础动力响应分析。
This paper describes the method of constructing the model for thyristor device which used for power electric circuits and presents a nonlinear lumped equivalent circuit model for it.
本文讨论了用于功率电子电路的晶闸管模型的建立方法。给出了一个适用于计算机辅助设计的非线性集中参数的晶闸管等效电路模型。
A new fast solution method for lumped parameter dynamic model is put forward, and is applied to lumped parameter dynamic model for single-phase temperature in boiler.
该文提出了一种用于动态过程集总参数模型的新的快速求解法，并将其应用于锅炉中单相工质汽温动态过程的集总参数模型。
A new distributed-lumped hybrid parameter theoretical model is devel- oped, suited to the human systemic circulatory system and the hydralic simulator in our laboratory.
本文建立了一种与本实验室体循环系统体外模拟实验系统相对应的新的分布—集中混合参数理论模型。
A dynamic heat transfer model based on the lumped parameter method was developed for cooling system of vehicle internal combustion engine.
提出了一个基于集总参数法的车用内燃机冷却系统动态传热模型。
The general lumped parameter model introduced in this paper offers more accurate results than the traditional method for dynamic stiffness matrix of foundation is frequency-dependent.
由于基础动力阻抗矩阵是外荷载激励频率的函数，采用更多参数的一般集中参数模型与数值解答吻合精度更高。
In this paper, basic transmission line equation and four kinds of lumped-circuit model were constructed according to transmission line theory, microwave network, antenna theory and matrix theory.
本文依据传输线理论、微波网络理论、天线原理、矩量法和矩阵理论等，建立起基本传输线方程和四种等效电路模型，为使用集总电路迭代近似方法建立了基础。
A 28 lumped kinetk physical model for reforming reaction was established according to the lumping principles of petrochemicals components, and compared with other reported models.
根据石油化工组分合并集总的原理，提出了28集总的重整反应动力学物理模型，并与其它文献报导的重整反应模型作了对比。
The dynamic thermal hydraulic model of Once Through Steam Generator (OTSG) is developed, Which characterized by lumped parameters with moving boundary.
采用集中参数处理方法，把直流蒸汽发生器二次侧按流体相变分区，建立了动态热工水力模型。
The design is done first in a equivalent lumped circuit model and then all lumped elements are implemented by planer circuit, which is required by integrated circuit.
设计过程首先从等效集总元件电路模型设计入手，然后使用平面结构实现各集总元件以便易于集成。
At present, the lumped parameter model of frost, which is based on experience and depend heavenly on the running condition, is widely used in simulation of air-cooled heat pump.
目前在风冷热泵机组的仿真研究中，对蒸发器结霜过程的模拟主要是采用一些由实验拟合而成的集总参数模型，而这些模型往往是在特定的运行条件下得到的。
At present, the lumped parameter model of frost, which is based on experience and depend heavenly on the running condition, is widely used in simulation of air-cooled heat pump.
目前在风冷热泵机组的仿真研究中，对蒸发器结霜过程的模拟主要是采用一些由实验拟合而成的集总参数模型，而这些模型往往是在特定的运行条件下得到的。
应用推荐