A novel prediction model for remaining capacity of batteries based on least square support vector machine (LS-SVM) was proposed.
提出了一种最小二乘支持向量机的电池剩余电量预测新模型。
An E-government website assessment model based on least squares support vector machines (LS - SVM) is established using the website assessment index system which is established for E-government.
在确立了电子政务网站评估指标体系的基础上,建立了基于最小二乘支持向量机(LS-SVM)的电子政务网站评估模型。
Time series modeling and identification techniques were analyzed and the ARMA time series model based on robust LS-SVM algorithm was proposed.
对时序数据建模与辨识技术进行了分析,提出了使用鲁棒LS-SVM算法建立ARMA时序预测模型。
Using the DYNA-MADYMO coupling method can integrate a full vehicle structure model in LS-DYNA format and an occupant constraint subsystem mode in MADYMO format into one system and simulate.
利用DYNA-MADYMO耦合计算方法可以将一个LS-DYNA格式的整车结构模型和一个MADYMO格式的乘员约束系统合并在一个系统里进行计算。
The product price forecasting model based on function-driven was presented by use of LS-SVM.
以最小二乘支持向量机为工具,构建了基于功能驱动的产品价格预测模型。
The development of instruction level power model is discussed to our self-made LS-RISC microprocessor.
针对笔者自主研制的LS -RISC微处理器,讨论了其指令级功耗模型的开发。
The model for filling time series data of traffic flow based on LS-SVM is proposed in this paper, missing data can be filled by using traffic flow historical data.
利用实例仿真验证表明,LS-SVM具有较好的泛化能力和很强的鲁棒性,采用基于LS-SVM的交通流时间序列模型补齐丢失数据能够取得很好的效果。
A finite element model describing the drawing process of the heat-shield panel of automobile engine is established by using the commercial dynamic explicit code LS-DYNA.
使用基于动态显式算法的商业软件LS - DYNA建立了某汽车发动机隔热罩拉延成形的有限元模型。
The nonlinear offline model of the controlled plant is built by LS-SVM with the radial basis function (RBF) kernel.
首先,用具有RBF核函数的LS-SVM离线建立被控对象的非线性模型;
With hemispherical EFP simulation model, the penetration process of EFP that satisfies the simulation ratio are calculated using explicit finite element program LS-DYNA in this paper.
在此基础上以球缺型爆炸成型弹丸为计算模型,应用显式有限元程序LS-DYNA对满足模拟比的爆炸成型弹丸侵彻钢靶的过程进行了数值模拟。
Soft sensor model based on LS SVM is applied to predication of frozen point of light diesel oil.
将基于最小二乘支持向量机的软测量模型应用于轻柴油凝固点的预估。
The model is implemented through a user defined material model in LS-DYNA. The model parameters are calibrated and validated by the data from related concrete penetration tests.
利用LS - DYNA程序的用户自定义材料模型开发并实现了模型算法,并用有关混凝土侵彻试验结果对模型参数进行了标定。
Model predictive control with least squares support vector machine (LS-SVM) has good control performance on the ship course even under the condition of disturbance and model parameter perturbation.
基于最小二乘支持向量机的船舶航向预测控制系统对外界干扰及模型参数摄动均具有较好的适应能力以及良好的控制性能。
The parametric finite element model of the television with packaging structure was established and its dropping simulation was achieved using the finite element analysis software ANSYS/LS-DYNA.
利用有限元分析软件ANSYS/LS-DYNA,建立长虹电视带包装的参数化有限元模型,对电视裸机与带包装两种工况下的跌落仿真模拟和跌落实验;
The discussion on the property comparison between optimally weighted LS estimate and linear unbiased minimum variance estimate for a linear model is presented.
在给定的线性模型下,讨论了最优加权最小二乘估计与线性无偏最小方差估计性能比较。
When carry out simulation of shaped charge penetration that based on ANSYS/LS-DYNA, many kinds of material model of the liner can be used, but the difference between them need to be studied.
基于ANSYS/LS-DYNA的聚能装药侵彻仿真时,药型罩材料模型的选择有多种,但仿真结果之间的差别多大,有待研究。
The finite element model of shallow spherical shell structures impacting a rigid plate is developed using the software LS-DYNA.
使用LS - DYNA软件建立了薄壁扁球壳结构撞击刚性板的有限元模型,并通过试验结果对模型的有效性进行了验证。
The model of the nonlinear system is obtained by LS-SVM, the offline model is linearize at each sampling instant and uses linear predictive function control methods to obtain the control law.
该算法采用LS-SVM回归建立非线性系统的预测模型,然后,将离线模型在每个采样周期关于当前采样点进行线性化,同时利用线性预测函数控制方法求解解析的控制律。
RBF neural network is applied to time series forecast with the same data in order to compare the forecast effect with LS-SVM model.
最小二乘支持向量机回归预测对训练样本数据区间内的预测精度很高,但是对前向外推预测效果不是很好;
In this paper, soft sensor modeling method based on Least Square SVM (LS SVM) is proposed, and cross validation method is used to select hyper-parameter of LS SVM model.
本文研究了基于最小二乘支持向量机的软测量建模方法,并用交叉验证的方法进行支持向量机参数选择。
The main contents and results of this paper as follows:Firstly, the drop simulation experiment has been carried out for the model of whole camera body by the analysis software, ANSYS/LS-DYNA.
本文以数码相机为研究对象,将其跌落仿真和注塑模拟相结合进行研究,使模拟结果更加准确可靠。
Because increased a water-outlet in structure, one Model LS pump can be used as two pumps of different fir fighting system of high-rise buildings.
由于结构上增多了一个出水口,一台泵能作两台不同性能参数的的泵使用,特别适合高层建筑消防系统的分层、分压供水。
The tube bending forming processes are simulated by explicit finite element code LS-DYNA. The model that tube is bent in a rotary machine is adopted.
采用显式有限元分析软件LS - DY NA,对于圆形钢管的弯曲加工过程进行数值模拟。
Model LS double-outlet fire pump is the Model DL pump equipped with two water-outlets.
LS型双出口消防泵即设置两个出水口的DL型泵。
A nonlinear predictive control algorithm based on least squares support vector machines (LS-SVM) model was proposed.
提出一种基于最小二乘支持向量机(LS - SVM)的非线性系统预测控制算法。
A nonlinear predictive control algorithm based on least squares support vector machines (LS-SVM) model was proposed.
提出一种基于最小二乘支持向量机(LS - SVM)的非线性系统预测控制算法。
应用推荐