The factors which effected the low temperature viscosity of the plastisol and the method to decrease the viscosity were studied.
研究了影响PV C糊低温粘度的因素,并探讨了降低PVC糊低温粘度的方法。
The present invention provides a burnup saving type engine oil with superior low vaporability and low temperature viscosity property.
本发明提供低蒸发性良好且低温粘度特性良好的省燃耗型机油。
The investigation on low temperature viscosity of engine oils with different degrees of viscosity and quality can support for the implementation and production of SAEJ300-99 (2001) standard in China.
定量地考察不同粘度级别和质量等级的发动机油的低温动力粘度,可以为SAEJ300- 99(2001)标准在中国的执行和生产多级油提供的数据平台。
Liquid injection molding utilizes low viscosity silicones which can be pumped at lower pressure and temperature, and cure in significantly less time and with less waste than solid materials.
液体侵渍模塑使用低粘度的硅树脂,在低压和低温条件下抽运,在极短的时间内固化,与固体材料相比,废弃物少。
Smaller than the oil viscosity of air, temperature, pollution, and thus can be used for high-speed machinery, apparatus and radioactive devices, but its load capacity than the oil is low.
空气比油粘滞性小,耐高温,无污染,因而可用于高速机器、仪器及放射性装置中,但其负荷能力比油低。
The modified starch adhesive has consistent quality of good viscosity, low gel temperature, good wet tack and water resistance.
改性后的玉米氧化淀粉胶粘剂粘接强度好、糊化温度低、粘度适当、抗水性好。
For these low melting point polyesters with different content of modifier r, the influence of temperature on viscosity of melt must be paid attention during post processing.
对于改性剂r含量不同的低熔点聚酯,在后加工时应充分考虑到温度对熔体粘度的影响。
Moreover, the low molecular weight and higher temperature are favorable to reduce the melt viscosity, to increase the critical shear rate and to improve the apparent quality of extrudates.
较低的分子量和较高的温度有利于提高临界剪切速率,改善挤出物外观质量和降低熔体粘度。
If the pump noise at work, this is often due to low oil temperature, oil viscosity is too high, the oil into the air, or pump coupling loss causes such as excessive wear and tear.
假如泵在工作时产生噪音,这往往是因油温太低,油液粘度太高,油液中进入空气,联轴节失中或泵过度磨损等原因引起。
Low energy consumption high plasticity dynamic coextruding machine screw optimally designed with computer, with good mixing effect, even high enthalpy resin temperature and high viscosity of coating.
根据动态塑化理论,通过计算机进行优化设计的新型低能耗高塑化动态挤出复合专用螺杆。具有良好的混炼效果和均匀高热焓的树脂温度,涂层粘着强度高。
A glassy phase possesses high viscosity at high temperature, high density and low permeability and porosity.
在高温下玻璃相具有高粘度、高密度、低透气性和孔隙率。
This paper introduced a preparation of modified polyvinyl formal adhesive. The adhesive has advantage of low free formaldehyde content, good viscosity stability and low temperature storage stability.
介绍了聚乙烯醇缩甲醛改性胶粘剂的制备方法。该胶粘剂具有粘度高,游离甲醛低,稳定性好的优点。
The results show that the addition of PET resin extends gel time, narrows temperature range at low viscosity of the melt resin system.
研究结果表明:PEI的加入使树脂体系的凝胶时间延长,导致树脂熔液在低粘度时的温度范围缩小和粘度增大。
Systematic study on the metallurgical properties of low-titania BF slag, such as "thickening", viscosity, temperature of meltability, stability and desulphurizing ability has been made.
文中系统地研究了高炉低钛渣的变稠、粘度、熔化性温度、稳定性和脱硫能力诸方面的冶金性能;
The adhesive has advantage of low free formaldehyde content, good viscosity stability and low temperature storage stability.
该胶粘剂具有粘度高,游离甲醛低,稳定性好的优点。
The creep viscosity increased rapidly at low temperature, but changed quite mildly at h...
蠕变粘度在较低温度下随时间增加较快,而在较高温度区随时间增加较缓。
Low viscosity, a room temperature curing amine hardener. Specially formulated filler is recommended for casting of patterns and moulds.
低粘度,室温固化胺类固化剂,特别用于浇铸模具的制作。
A clay sealant is introduced which has many advantages, such as low viscosity, room temperature curing, no cracking, good toughness.
介绍了一种黏度低、室温固化、不开裂、韧性好的密封胶泥。
By it to R22 solubility in the unusual low temperature, as well as broad viscosity scope.
由其对r 22在非常低温之溶解度,以及宽广的黏度范围。
During fracturing of low-temperature, shallow oil and gas reservoirs, it is difficult to break viscosity because of low activity of convention viscosity breaker at low temperature.
低温浅层油气井的压裂,常由于低温下常规破胶剂活性太低而破胶困难。
Then the two full-viscosity asphalt temperature, temperature resistance, low and high temperature performance, adhesion properties and the mixing and shaping temperatures were tested.
随后对两种沥青的全粘温度、感温性、低温性能、高温性能、粘附性能以及拌和及碾压温度进行了测试分析。
In this paper, properties of automobile gear oil used different viscosity improvers, such as viscosity, brookfield viscosity, low temperature fluidity, shear stability, etc. are studied.
本文就粘指剂在车辆齿轮油中的应用进行了考察,结果显示不同粘指剂在应用过程中对油品的低温性能、增粘效果、剪切安定性等形成不同的影响。
The extraordinary dispersion of clean, low-temperature start, low evaporation loss, viscosity-temperature properties and oxidation stability.
超凡的清净分散性、低温启动性、低蒸发损失、粘温性能及氧化安定性。
Excellent dispersion of clean, low temperature start, and viscosity-temperature properties and oxidation stability, effective control of engine oil sludge and piston deposits.
优异的清净分散性、低温启动性、粘温性能及氧化安定性,有效控制发动机油泥和活塞环沉积物。
Excellent dispersion of clean, low-temperature start, viscosity-temperature oxidation stability and performance.
优异的清净分散性、低温启动性、粘温性能及氧化安定性。
The extraordinary dispersion of clean, low-temperature start, viscosity-temperature oxidation stability and performance.
超凡的清净分散性、低温启动性、粘温性能及氧化安定性。
Add different for different crude oil pour point depressant, dispersant or viscosity reducer can improve low-temperature fluidity of crude oil.
针对不同原油加入不同降凝剂、分散剂或降粘剂可以改善原油的低温流动性。
Add different for different crude oil pour point depressant, dispersant or viscosity reducer can improve low-temperature fluidity of crude oil.
针对不同原油加入不同降凝剂、分散剂或降粘剂可以改善原油的低温流动性。
应用推荐