The low sintering and low dielectrics substrate materials and their properties, and the organic additives for tape casting slurry are compared and analyzed.
对目前已研究和使用过的低介电常数和低烧结温度基板材料及综合性能，流延浆料有机添加剂进行了对比分析。
Cost of reaction sintering is relatively low, but there is always residual silicon in products, lowering the products quality.
反应烧结成本相对低一点，但制品中总有残余硅存在，使得制品的质量不高。
The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated.
分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。
Good quality, high production and energy consumption in iron-making are directly influenced by the high or low production and the quality of sintering ores.
烧结矿产量的高低、质量的优劣都将直接影响到炼铁生产的产、质量及能源消耗。
A support material with low expansivity and high conductivity, called DG alloy, was prepared by powder metallurgy. The effects of sintering process on its properties and microstructure were studied.
采用粉末冶金技术制备了一种低膨胀高导热支撑材料(简称DG合金)，研究了烧结工艺对合金组织和性能的影响。
This paper introduced a low melting point high strength nano vitrified bond with controllable pores developed by the authors, in respects of the sintering process and its pore structures.
本文介绍了自主研制的具有可控气孔的低熔高强纳米陶瓷结合剂的烧结工艺和气孔结构特性。
Study is made for processing low grade tungsten mineral and waste residue of tungsten by soda sintering.
进行了苏打烧结法处理低品位钨矿和废钨渣的研究。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术，具有改善烧结矿质量、提高烧结矿强度、降低燃料消耗等优点。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术，具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
The effects of sintering process on the properties of 4J32 low expansion alloys by powder injection molding were investigated.
研究了烧结工艺对粉末注射成形4J32低膨胀合金性能的影响。
The liquid synthesis of nanocrystals titania at low temperature, due to avoiding the sintering process, brings superior physical and chemical properties.
低温液相合成晶态纳米二氧化钛由于避免了高温煅烧过程，可望赋予其更优越的特性。
Properties of Products: low porosity bricks USES low mullite stones as main raw material, main mineral compositions are mullite phases after pressing sintering.
产品特点：低气孔率粘土砖是采用低氯莫来石为主要原料，经高压成型、高温烧结而成，主要矿物组成为莫来石相。
With sintering pot test it is found out the reasonable chemical component in sinter under the condition of Xuan Steel as well as the control range of various components for low-silicon sinter.
通过烧结杯试验，找出了宣钢原料条件下烧结矿合理化学成分、烧结矿低硅条件下各种化学成分的控制范围。
This paper describes the research of sintering, sinter leaching and red mud settling performances with regard to the low A/S ratio crude pulp of Bayer red mud of Guizhou Aluminium plant.
我们对贵州铝厂低A／S拜耳法赤泥生料进行了烧结、熟料溶出及赤泥沉降性能等试验。
Now, it is an urgent need for electronic ceramic industry to solve the problem that insulative materials must be obtained at low sintering temperature.
低温烧结绝缘材料是当前电子陶瓷行业迫切需要解决的问题之一。
The paper select the dust removal system on high ore bunker in The Lianyuan steel sintering plant as the study object, find the reason why the efficiency of the electrostatic precipitator is low.
本文选取涟源钢铁集团烧结厂高料仓除尘系统改造项目为研究对象，对原有电除尘器除尘效率低下的原因进行分析并加以全面改造；
This paper studies the problem of the low manufacture quality of the laser sintering equipment for powder material by experiment.
针对粉末材料激光烧结设备成型质量不高的问题，进行了实验。
MgO whisker was prepared from MgSO4 and NaOH as low - cost sources by sintering of the precursor.
以价格低廉的硫酸镁和氢氧化钠为原料，通过前驱体烧结法制备氧化镁晶须。
The research of ignition system in sintering machine, including smoothing raw material layer, low negative pressure ignition, igniting intensification, selection of igniting device, is introduced.
介绍了攀钢烧结厂为完善点火制度在铺平料面、低负压点火、提高点火强度、点火器种类的选择等方面所作的研究与应用。
Introducing selective laser sintering (SLS), an important branch of RPM, this paper gives a new method oriented on low power SLS system to fabricate metal parts.
本文在介绍快速成型技术的一个重要分支——选区激光烧结的基础上，提出了一种基于小功率激光快速成型系统的金属零件成型工艺。
The cement has advantages of low sintering temperature, fast coagulation time, high initial and later strength and good corrosion resistance.
该水泥烧成温度低、凝结时间快、早期和后期强度都高、耐侵蚀性能好。
It is especially applicable for sintering Mn-Zn soft ferrite material with high permeability and low power loss.
特别适用于锰锌高导软磁铁氧体和低功耗软磁铁氧体等高档铁氧体材料的气氛烧结。
The product is made of high quality low-carbon steel with sintering porous bronze as its interlayer, with the compound of POM as its surface.
该产品是以优质低碳钢板为基体，中间烧结一层多孔青铜层，表面轧制一层POM混合物。
As ZnTiO3 has the outstanding dielectric property and low sintering temperature, it has been mixed with Ag, Cu, etc. to prepare electrodes at relatively low sintering temperature.
钛酸锌微波介质陶瓷因其优异的介电性能、较低的烧结温度，而被广泛应用于制备银、铜电极共烧中温低介微波材料中。
But it has low melting point and sintering point, when it is used to extinguish a fire, it can rapidly decompose to form a layer of film, which can cover the surface of comburent and make the fire.
但低聚磷酸铵具有较低的熔点和烧结点，用来灭火时能迅速分解形成膜层覆盖于燃烧物表面使火焰熄灭。
The results of non-isothermal sintering tests suggested that LSCF powder possessed good low-temperature sintering activity.
非等温烧结实验表明该粉体具有良好的低温烧结活性。
The lower sintering temperatures and shorter sintering time are used in the sintering process for fine molybdenum powder sintering characteristics of low-temperature activation.
由于超细钼粉低温活化烧结特性，在烧结过程中降低烧结温度，减少烧结时间，有效地提高钼板坯的晶粒数，同时降低了车间的生产成本。
The breaks in heating and pre-sintering repeatedly at low temperature are unfavourable to phase transformation.
预烧过程中升温中断或在较低温度下反复预烧不利于正常相变；
The breaks in heating and pre-sintering repeatedly at low temperature are unfavourable to phase transformation.
预烧过程中升温中断或在较低温度下反复预烧不利于正常相变；
应用推荐