High-density polyethylene and low-density polyethylene were the second and third place polymers.
高密度聚乙烯和低密度聚乙烯是在名单中排在二位和三位的高聚物。
Ground cable core insulation used with anti-oxidant properties of K-B type low-density polyethylene.
电缆地线芯绝缘采用具有抗氧化性能的K型B类低密度聚乙烯。
The influence of small grain size glass bead (GB) on the properties of linear low-density polyethylene ( LLDPE) was studied.
研究小粒径玻璃微珠的粒径和用量对线形低密度聚乙烯（LLDPE）性能的影响。
The effect of intumescent flame retardant(IFR)on the combustion and smoke of low-density polyethylene(LDPE)was studied by cone calorimeter.
用锥形量热法研究了膨胀型阻燃剂对低密度聚乙烯燃烧和发烟性能的影响。
It introduces affects and improvement that the fluorine-bearing modifier has on to linear low-density polyethylene resin extrusion and surface property.
介绍了含氟改性剂对线性低密度聚乙烯(LLDPE)树脂挤出性能的影响及表面性能的改善。
The present paper discusses the effect of temperature and humidity on the electric strength of low-density polyethylene (LDPE) film for various stressing modes.
本文讨论温度及湿度对不同应力模式下低密度聚乙烯(LDPE)薄膜电强度的影响。
The factors lead to shutdown are equipments, electric meters, other non-workshop reasons and process operation in turn via analysis many unexpected shutdown of low-density polyethylene unit.
分析了低密度聚乙烯装置多次发生非计划停工的原因，发现导致装置发生停工较多的因素依次为设备、电气仪表、其他非车间原因以及工艺操作等。
Low density polyethylene makes a nice substitute for PVC. It has a simple makeup and doesn't require additives to make it soft and pliable.
低密度的聚乙烯是PVC很好的替代品，它的生产过程相对简单，也不需要添加化学物质增加柔软性。
LDPE (Low Density Polyethylene) : Offers such advantage as tear strength and high chemical resistance. It is also waterproof.
(低密度聚乙烯)：具有以下优良性质：高撕裂强度，高耐化学性，防水性。
A low density polyethylene produced by a low pressure process, by Ziegler-Natta polymerization or by use of the Phillips process.
采用低压过程，齐格勒·纳塔聚合或菲利浦斯公司工艺生产的一种低密度聚乙烯。
This paper deals with the foaming of Linear Low Density polyethylene (LLDPE) with filler.
本文介绍了用线型低密度聚乙烯(LLDPE)进行填充发泡的试验结果。
The rheological properties of low density polyethylene (LDPE) were measured under conditions close to the practical extrusion process by means of a capillary rheometer.
应用毛细管流变仪测量了在接近实际挤出工艺条件下低密度聚乙烯熔体的流变性质；
This paper introduced the evaluation of domestic titanium tetrachloride BL-828 in line low density polyethylene (LLDPE) plant using of BP process.
介绍了国产四氯化钛BL- 828在BP工艺生产线型低密度聚乙烯(LLDPE)工业装置上的评价情况。
The grafting of acrylic acid on to low density polyethylene(LDPE) was studied in solution. Benzoyl peroxide(BPO) and xylene were used as initiator and solvent respectively.
以过氧化苯甲酰（BPO）为引发剂，二甲苯为溶剂，进行了丙烯酸与低密度聚乙烯（LDPE）的溶液接枝聚合。
The effects of heating, tensile and high pressure treatments on the aggregate structure of low density polyethylene (PE-LD) samples were studied using a modulated DSC (MDSC).
采用调制式DSC分别对热、拉伸及高压处理后低密度聚乙烯的聚集态结构变化特点作了研究。
The results demonstrate that the system has reached the anticipated design requirements and advanced the automatic control performance of industrial linear low density polyethylene plant.
结果表明，该系统达到了预期的设计目的，提高了线性低密度聚乙烯装置的自动化水平。
The extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene (LLDPE) melt have been investigated by using a rheometer.
应用毛细管流变仪，考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出中的胀大现象及其影响因素。
The flame resistances and tensile strengths of decabromodiphenyl oxide (DBDPO) and octabromodiphenyl oxide (OBDPO), to low density polyethylene (LDPE) were researched.
讨论了十溴二苯醚（DBDPO）和八溴二苯醚（OBDPO）对低密度聚乙烯（LDPE）的阻燃性能和拉伸强度的影响。
The free volume properties of high impact polystyrene (HIPS)-low density polyethylene (LDPE) blend have been investigated by means of positron annihilation lifetime spectra (PALS).
不同组成的高冲聚苯乙烯（HIPS）和低密度聚乙烯（LDPE）共混物的正电子湮没寿命谱被测量，结果表明HIPS和LDPE是不相溶共混物。
Siloxane was grafted on the low density polyethylene to improve the property of the environmental stress cracking of low density polyethylene.
研究了低密度聚乙烯接枝聚硅氧烷后的环境应力开裂性。
LDPE (Low Density Polyethylene) : Offers such advantage as tear strength and high chemical resistance. It is also waterproof.
LDPE(低密度聚乙烯)：具有以下优良性质：高撕裂强度，高耐化学性，防水性。
This paper introduced the properties of linear low density polyethylene (LLDPE) TJDL-9270 in the application as cable base resin and its development process.
介绍了线型低密度聚乙烯(LLDPE)电缆料TJDL- 9270的性能特点和开发过程。
As the improvement of the invention, the raw material of the plastic membrane also comprises 10 to 25 weight portions of metallocene catalyst for liner low density polyethylene.
作为本发明的改进，所述塑料薄膜的原料还包括按重量计的10 ~25份用于线性低密度聚乙烯的茂金属催化剂。
Designed for punching holes in LLDPE (Linear Low Density Polyethylene) film.
冲压设计在LLDPE洞(线性低密度聚乙烯)薄膜。
Low density polyethylene except low density polyethylene which is used for production of coloured master batch.
低密度聚乙烯，用于生产着色母料的除外。
White LDPE scrap (loose), white LDPE scrap (loose) shall consist of sorted white Low Density Polyethylene (LDPE) scrap.
白色LDPE小块(散装)将包括被分类的白色低密度聚乙烯(LDPE)小块。
Colored LDPE Regrind, Colored LDPE Regrind shall consist of shall consist of sorted reground flake of Low Density Polyethylene (LDPE), sorted into a single color.
有颜色的LDPE再生(料)将包括将包括低密度聚乙烯被分类的被再生(料)(LDPE)，被排序入一种唯一颜色。
The nanocomposites were prepared by low filling black powder to HDPE(High-Density Polyethylene) and LLDPE(Linear Low-Density of Polyethylene), the structures and properties of composites were studied.
采用黑粉低填充HDPE、LLDPE基体制备纳米复合材料，研究了复合材料的结构和性质。
The nanocomposites were prepared by low filling black powder to HDPE(High-Density Polyethylene) and LLDPE(Linear Low-Density of Polyethylene), the structures and properties of composites were studied.
采用黑粉低填充HDPE、LLDPE基体制备纳米复合材料，研究了复合材料的结构和性质。
应用推荐