Android: Shutting down thread and Looper correctly?
安卓：关闭线程和活套正确吗？
Band: Custom Injected Polyurethane With Patented Locking Looper.
带：自定义注入聚氨酯具有专利锁活套。
The Looper thread Take-up can make it up and down for threading easy.
升降式底线分线盘，使穿线更容易。
Entry strip support table, looper roll and four-point centering device.
进料支撑台，跳动辊，四点对中装置。
Describing working principle and method of new hydraulic looper control system supplied by Germany.
论述了从德国引进的新型的液压活套系统的工作原理和控制的实现方法。
Bend needle mechanism and looper mechanism are two important mechanisms in blind stitching machine.
弯针机构与成圈叉机构是暗缝缝纫机的两个重要机构。
S. cross-cuting shear line, and the formation of the looper and its control process is also introduced.
横切机组活套和最小板间距的计算方法。同时也介绍了活套的形成及控制过程。
The patented looper thread take-up put on the front of body, to clean the winding and adjustment easily.
前置式底线分线盘：专利底线分线盘外置于机体前侧，可轻易清除绞线、调整容易。
The strategies of the looper height control and strip tension control of the specific mill are described.
给出了针对该特殊轧机所采用的活套高度及带钢张力的控制方案。
The patented looper thread take-up put on the outside of body, to clean the winding and adjustment easily.
前置式底线分线盘：专利底线分线盘外置于机体前侧，可轻易清除绞线、调整容易。
For replacing part (s) of needle, presser foot, throat plate, looper, spreader, feed dog, needle guard, folder, cloth guide etc.
更换机针、压脚、针板、弯针、分离器、送布牙、护针器、支架、布导向器等时。
The control strategy of prediction for a linear model based on BP-PID was introduced to improve control effect and to decouple the looper system.
采用线性预测模型的BP神经网络PID控制策略以减弱系统的耦合影响，以提高控制效果。
A neural network multivariable simple adaptive control (NNMSAC) is proposed, disposing of decoupling control with looper system in hot strip mill.
针对现代带钢热连轧中活套系统的解耦控制问题，提出了基于神经网络简单自适应多变量解耦控制方法(NNMSAC)。
After the parameters of the looper system and silicon control system were matched reasonably with each other, the non-tension rolling was realized.
根据该厂情况，将活套系统与轧机可控硅系统的参数合理匹配，实现了无张力轧制。
Based on constant tension control mechanism, this article detailedly expounds algorithm of looper torque compensation and realization of tension control.
本文从恒张力控制的机理出发，详细阐述了活套转矩补偿算法和张力控制系统的实现。
Looper system is an important part in steel rolling production-line, and faults of this system can effect the whole line's running and the product's quality.
活套液压系统是轧钢生产线中一个重要的环节，该系统的故障会直接影响到生产线的运行及产品质量。
The strip goes to exit part after exit looper for oiling, recoiling, cut into final coils. The final coils are discharged, packaged and delivered into storage.
带钢在出口段经涂油、剪切、卷取后成为成品卷，成品卷被卸下、包装送去存储。
Several methods for recovery procedure of the polyhedral inclusion bodies of nuclear polyhedrosis virus of the poplar looper, Apocheima cinerarius, were compared.
本文就杨尺蠖核多角体病毒的几种回收方法进行了比较。
According to the CSP process requirement, the looper control device and control system including its structure, function and auto-control principle is researched.
本文根据CSP工艺的技术要求，研究分析了活套控制装置及控制系统，介绍了液压活套的结构和功能，以及自控原理。
To use the patent of "DIRECTLY driving THIRD SHAFT CONNECTING TYPE" mini servomotor join with looper thread pith-up which offer you more sensitive driving and take-up.
第三支传动轴外接直驱微型伺服小马达运动底线分线盘：采用专利研发第三支传动轴外接直驱微型伺服小马达运动底线分线盘，使得驱动更灵敏、分线时间更正确。
Through re-understanding of looper height and tension control model, combined with expert knowledge and project practice, ideal control characteristic of looper was presented.
通过对活套高度和张力控制模型的再认识，结合专家知识和实践经验提出理想活套控制特性。
The method is applied to the looper height and tension control of hot strip mill. Simulation result proves effectiveness of the method in both decoupling effect and control performance.
将该解耦方法应用于热连轧高度和张力控制系统，仿真结果表明可获得良好的解耦效果和控制特性。
Automatic velocity control system for the continuous tandem cold mill let the rolling mill work continuously by using the looper to keep the uncoiling operation separating from the rolling process.
全连续冷连轧机的自动速度控制系统要求通过活套分离开卷运行过程和轧制运行过程以实现全连续轧制。
A control strategy based on BP-PID was introduced to decouple the looper system by using FPGA, which includeds systolic mapping, data representation and precision, and computation components design.
采用基于BP神经网络整定的PID控制策略以减弱系统的耦合影响，并给出了其控制算法在FPGA上实现的方法，包括脉动阵列算法映射、数据表示及精度和运算部件设计。
PLC control is adopted in automatic control system for finishing area of Chuanwei 950 mm hot strip mill. Main functions include speed cascade control, tension control, looper control, APC control etc.
川威950热轧带钢精轧区自动控制系统采用P LC控制，主要实现速度级联控制、张力控制、活套控制、APC等。
PLC control is adopted in automatic control system for finishing area of Chuanwei 950 mm hot strip mill. Main functions include speed cascade control, tension control, looper control, APC control etc.
川威950热轧带钢精轧区自动控制系统采用P LC控制，主要实现速度级联控制、张力控制、活套控制、APC等。
应用推荐