There are many methods for analysing electronic circuit, such as branch current, node voltage, mesh current and loop current method.
电路的一般分析方法有许多，如支路法、节点法、网孔法和回路法等。
Instead very simple derivation operation is used. It is easy to grasp this method compared with branch current method, loop current method or nod voltage method.
自导纳。互导纳的工作代之以一些很简单的求导运算。它与传流的支路法。回路法。节点法相比更加易于掌握。
The network equations based on loop current method and expressed in matrix form are established, and the loop currents, then the brance currents, can be calculated by the equations.
以回路电流法为基础，选定某一定子绕组为基准绕组，列写了用矩阵形式表示的、计算回路电流及支路电流的网络方程。
By means of circuit topology theory and loop current method, simulation and calculation are performed on the 12-phase power winding of an induction generator with rectifier load system.
为了对异步发电机十二相功率绕组带整流负载系统进行仿真计算，采用了基于电路拓扑理论的回路电流法。
The main method USES an enhanced for loop to iterate through the different primitives and a simple switch statement on the current instance to set the size value of each primitive.
main方法使用增强的for循环来迭代通过不同的原语，并在当前实例上使用一个简单的switch语句来设置每个原语的大小值。
Controlling method of current loop with single neuron adaptive PSD controller which can make motor work stably in the condition of changing load is discussed in detail.
详细介绍了采用单神经元自适应PS D控制器对电流环进行调节的方法，使电机能稳定工作在变负载条件下。
A passive loop filter scheme and the design method of the filter for current charge pump PLL frequency synthesizer chip are given in the paper.
针对电流型电荷泵PLL频率综合器芯片，提出一种称为极值相位裕量的无源环路滤波器方案和设计方法。
Based on the analysis of the different interference patterns, a method in which a current loop is added in gyro loop to further improve the degree of isolating for the ship rocked is presented.
论述船用跟踪雷达角伺服系统在不同驱动方式下对船摇扰动隔离效果最好的方法，并对扰动模式进行了分析，指出在陀螺回路内加电流环路可进一步提高船摇隔离度。
This paper puts forward a voltage and current double closed-loop controlling method based on three-phase voltage source PWM inverter.
提出了一种基于三相电压型PWM逆变器的电压电流双闭环控制方法。
Using Biot-Savart law and the Feynman's model, the paper suggested a simple method to calculate the magnetic field generated by a current loop with arbitrary shape.
文章根据毕沙定律、电流回路元和载流线圈的费曼模型，用普通物理的方法计算出载流线圈在远处一点的磁场分布。
The solve of the loop power networks can be got directly through circuit current method, but the complex calculation are also needed.
环式电网的求解一般可直接采用回路电流法，但需要进行繁琐的运算。
The wiring correctness of differential protection current loop can be verified using phasor analyzing method and on load testing method.
差动保护电流回路接线是否正确，可通过相量分析法和带负荷检验法进行判断。
Based on cascade control strategy and nonlinear auto-disturbance-rejection control (ADRC) method, double loop (position loop and current loop) ADRC was designed for single-pivot levitation system.
双环(位置环和电流环)自抗扰控制器的设计，以单点悬浮系统为研究对象，采用分级控制策略和非线性自抗扰控制方法。
The control method of current loop with single neuron adaptive PSD controller is discussed in detail, which can make motor work stably in condition of changing load.
详细介绍了采用单神经元自适应PS D控制器对电流环进行调节的方法。
But fundamental loop analysis method can not be used for approaching the loop analysis problems of the loop containing current source branch.
但是基本的回路分析法不能用于处理含有电流源支路的回路分析问题。
Besides, the paper introduces the method of interrupting the current by means of a synthetic loop with an arc-ignition device and presents an analysis of the test result.
此外，还介绍了用具有引弧装置的合成迥路来作开断电流试验的方法，同时分析了试验结果。
A test method of torque synchro rotor quadrature axle damping short-loop loss and current was introduced.
介绍力矩式自整角机转子交轴阻尼短路环损耗和电流的一种测试方法。
Besides, a simple and practical method to realize the current closed loop in hardware is offered.
同时提供了一种简单实用的电流闭环控制的硬件实现方法。
The wiring correctness of differential protection current loop can be verified by using phasor analyzing method and on load test method. These two methods were described.
差动保护电流回路接线是否正确，可通过相量分析法和带负荷测六角图检验法进行判断。简要介绍这两种方法，并介绍了利用潮流方向验证六角图的方法。
A double loop control method has been used, so the output current can accurately follow the programmable reference, and the flux imbalance is avoided.
采用双环控制，使输出电流能够高度精确跟踪电流编程基准，防止了偏磁。
And the indirect experimental tests of synchro axis damping short-loop loss and current in a synchronous control system were carried out, and proved this method was feasible.
用该方法对同步控制系统中的自整角机交轴阻尼短路环的损耗和电流进行了间接的实验测试，证实该方法可行。
The mathematical model of closing loop operation is established and a method for surge current calculation based on Thevenin s equivalent is proposed in this paper.
针对合环操作冲击电流可能越限的问题，提出一种基于戴维南等值的冲击电流计算方法。
Secondly, the DC voltage loop and inner current closed-loop control method, both to ensure zero static error of the inverter output, but also to ensure that the inverter output waveform.
其次，本文采用直流电压外环、电流内环的双闭环控制方法，既保证了逆变器输出的静态误差为零，又保证了逆变器良好的输出波形。
The paper takes advantage of a double closed-loop control method based on average-current mode and improves the static and dynamic performance of the converter.
论文采用了平均电流模式下的双闭环控制，提高了变换器的动态性能和稳态性能。
This method can not only control size of the starting current efficiently but also improve open-loop starting performance of BLDCM, so improve the reliability of the system.
该起动控制方法不但有能效控制起动电流大小，而且改善了BLD—CM开环起动性能，提高了系统的可靠性。
In the current loop, a predicted current control method is proposed to ensure the system to achieve fast dynamic response.
在电流回路方面，借由预测电感电流之变化以产生所需之控制力，使系统具有快速的动态响应。
In the current loop, a predicted current control method is proposed to ensure the system to achieve fast dynamic response.
在电流回路方面，借由预测电感电流之变化以产生所需之控制力，使系统具有快速的动态响应。
应用推荐