If patients do experience a decreased ROM as a consequence of impingement, then subluxation and edge loading may occur, which can lead to a higher wear rate and early failure.
如果病人感觉到降低活动度是撞击的结果，然后半脱位和边缘负荷可能发生，这能导致更高的磨损率和早期的失败。
Do not exceed loading rate of 200tonnes per hour.
装货速率不要超过每小时200吨。
If the failure is defined as the final fracture of a component, then both S-N curves and crack growth rate curves reflect the fundamental material behavior under fatigue loading.
如果都把一个构件的最终断裂作为疲劳破坏的定义，则S - N曲线和裂纹扩展率曲线均是反映金属在疲劳载荷作用下的基本材料特性。
For the UPR with greater brittleness, the brittle-tough transition was observed only when the toughness of the resin was characterized by fracture toughness at a slower loading rate.
对于脆性较大的UPR，只有在采用加载速度较慢的断裂韧性来表征其韧性时，方能观察到这一脆韧转变现象。
The rate of losing water decreased with the loading density increasing.
而且随着装烟密度的增加，失水速率减小。
The effect of loading rate on concrete splitting tensile strength for different lateral stresses is studied.
系统地探讨了有侧应力作用时，混凝土在不同加载速率下的劈拉强度规律。
This provides a feasible testing method for studying the behavior and constitutive relation of rock failure with medium stain rate under dynamical loading or static and dynamical combination loading.
为研究岩石在中等应变速率下的动态加载或动静组合加载的破坏特性及本构关系提供了一种可行的试验方法。
The materials of tube for loading particles and the load height have less effect on the apparent mass burning rate.
装填药粒用的壳体材料和药粒装填高度对传火速度的影响不显著。
The rate of loading should be 300 metric tons per workable hatch.
每个可使用的舱口的装货率应为300公吨。
By controlling ship floating state, the rate and ability of loading or discharging ballast water can be enhanced to ensure the adaptation of ballast water to cargo operation during the cargo loading.
通过控制船舶的浮态提高船舶压载水的速率及排放能力，保证货物装载过程中压载水与货物操作相适应。
The experimental investigation of the effect of loading rate on the tensile properties of PC/ABS and the analysis of the test results has been given in the paper.
从简单的拉伸试验着手，研究了应变加载速率对PC/ABS 高分子材料拉伸性能的影响，并对试验结果进行了详细分析。
The computing method and its application of the reduction rate of the load with diagonal and symmetrical loading are discussed and given.
并讨论了斜对角装载、斜对称装载产生的减载率的近似计算方法及其应用。
Shortterm shear behaviors depend on loading rate and test temperature while the shapes of the shear creep curve and the creep lives depend on test temperature and stress.
瞬时剪切行为存在加载速率、温度相关性；剪切蠕变曲线形状和蠕变寿命与温度及应力大小有关。
The change of strength with loading rate is primarily due to the variation of cohesion with loading rate.
且强度变化主要是由于粘聚力随加载速率变化引起的。
Different tensile rates were adopted during the experiment, and the influence of loading rate on the mechanical properties of the composite material was analyzed thoroughly.
采用不同的拉伸速率对复合材料加载，分析了加载速率对复合材料性能的影响。
Tibial plateau fracture is intra-articular fracture of weight loading joint with high incidence rate.
胫骨平台骨折是负重关节的关节骨折，发病率较高，对康复的要求也很高。
The equations of loading and bounding surfaces are described in strain-energy release rate.
加载面、边界面方程均以损伤能量释放率表示。
The equations of loading surface and boundary surface are expressed in strain-energy releasing rate.
加载面、边界面方程均以损伤能量释放率表示。
The acoustic emission energy signals become stronger with the increase of loading rate.
加载速率越大，声发射能量最大值也越大。
The effects of the electric displacement loading on the crack initiation in a PZT-5H piezoelectric ceramic media were investigated by the theory of maximum energy release rate.
以最大能量释放率为启裂准则，结合PZT-5H压电陶瓷材料，分析了电位移载荷对裂纹启裂的作用效果。
Feeding rate, the kiln incline degree and the kiln rolling speed are adjusted to study the changes of particles mean residence time (MRT), mean volume flow (MVF) and loading rate in the kiln.
通过改变给料率、回转窑倾角、回转窑转速来考察它们对物料在回转窑内的平均停留时间(MRT)、平均体积流率(MVF)、填充率的影响。
Different tensile rates were adopted during the experiment, and the Influence of loading rate on the mechanical properties of the composite materiel was analyzed thoroughly.
采用不同的拉伸速率对复合材料载入，分析了载入速率对复合材料性能的影响。
The effects of loading rate, interfacial adhesive energy, relaxation time of matrix material, average size of particles, and the particle-size dispersity on the energy dissipation are discussed.
在此基础上，计算了材料中的粘性耗散功和损伤耗散功，并讨论了加载速率、界面粘结能、基体材料的松弛时间、平均粒径和粒径分散度等对这两种耗散机制的影响。
Moreover, the increase of hydraulic loading will lead to the decline of the removal rate of organics and ammonia nitrogen.
此外，在低温条件下提高水力负荷会导致对有机物和氨氮去除率的下降。
The effect of loading rate, test temperature and pre-plastic deformation on hydrogen induced apparent yield stress reduction have been investigated.
研究了变形速度，试验温度以及预先塑性变形程度对氢致表观屈服强度下降的影响。
The absorbed energy property and deformation characteristic of magnesium alloy under high strain rate loading are described.
介绍了高应变率载荷条件下镁合金的吸能特性及变形特征；
So the regeneration of high loading rate sludge was noneffective.
对于高负荷污泥的再生是无效的。
In this paper, a new type of sludge bulking problem caused by high loading rate is described, the control measures for this kind of problem has been studied.
提出一类高负荷的丝状菌污泥膨胀现象，并对高负荷引起的污泥膨胀控制进行试验研究。
In this paper, a new type of sludge bulking problem caused by high loading rate is described, the control measures for this kind of problem has been studied.
提出一类高负荷的丝状菌污泥膨胀现象，并对高负荷引起的污泥膨胀控制进行试验研究。
应用推荐