The process is briefly presented form loading material, charging furnace, converting, slagging to tapping of steel and slag.
简要介绍了转炉炼钢从上料开始到装炉料、吹炼、造渣、出钢、出渣的工艺过程；
A loading material method of pressing the agricultural residue tightly and covering the surface with ash was proposed after some experiments.
通过初步实验，确定了装料时压实生物质料、装料后在表面覆盖灰的阴燃操作方法。
The CORE Business client handles common ERP related tasks such as the creation of proposals, loading of bills of material, and accounting.
CoreBusiness客户端处理与通常的ERP相关的作业，例如设立提案、装载票据材料和财务管理。
If the failure is defined as the final fracture of a component, then both S-N curves and crack growth rate curves reflect the fundamental material behavior under fatigue loading.
如果都把一个构件的最终断裂作为疲劳破坏的定义，则S - N曲线和裂纹扩展率曲线均是反映金属在疲劳载荷作用下的基本材料特性。
If there is a lot of rest material to be removed, then IT will automatically add extra passes into those areas to reduce tool loading.
如果残余量很大的话，IT就会自动的在这些区域加一些切削层以降低刀具的负荷。
Dynamic constitutive properties of concrete material play important roles in the analysis of concrete structures subjected to impact loading.
混凝土材料的动态本构关系对冲击载荷作用下的混凝土结构分析很重要。
As a prosperous method for material science research, the technology of shock wave loading is becoming more and more emphatic.
冲击波加载技术作为一种极具潜力的材料科学研究手段正逐渐为人们所重视。
In this paper, one kind of multi-functional material mechanics experimental system has been designed to implement different loading modes and all kinds of experiments.
文中研制了一种可以实现不同的加载方式、能够完成多种不同的实验的多功能材料力学实验台。
Large capacity material surge bins allow your loading system adequate time to keep up with the voluminous supply these blenders are capable of producing.
大容量的材料负载箱能让您的加载系统在适当的时间满足搅拌机搅拌时所需的大容量供给。
"Don't create a computer model until the loading, material properties and boundary conditions are clearly defined".
只有在荷载，材料属性和边界条件很清楚的情况下，才能建立一个计算模型。
General loading condition of rolling mill bearings is medium - heavy load and shock load, thus the most suitable material is carburising bearing steel.
轧机轴承一般载荷条件是中重载荷和冲击载荷，因此，最适用的材料为渗碳轴承钢。
The condition presented here is not only dependent on the mechanical properties of the material, out also on the loading boundary condition and deformation.
这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形。
All practical initial imperfections can be considered, and, the effect of loading, unloading and reloading to the material of members can be included in analysis.
本方法可以考虑任意实际初始缺陷和材料弹塑性加卸载效应的影响。
The relations between material characters combining with loading-strength and fragment mass distribution are also discussed.
还结合壳体材料性质及载荷强度，对破片的断裂特征及尺度分布进行了讨论。
Under the loading conditions of uniaxial and slightly biaxial tension, the characteristics of material bifurcations (plane shear banding and surface wrinkling) are demonstrated.
文中揭示了在单向和弱双向加载条件下材料分叉(平面剪切带和表面皱曲)的一些特征。
Loading speed is a key factor affecting the fracture splitting quality, and proper loading speed can increase the brittleness of material.
加载速率是影响裂解质量的重要因素，合理的加载速率可以提高材料的脆性。
During the rock similar material uniaxial compressive test, the deformation and strengthen character were directly affected by different material proportion and loading rate.
在岩石相似材料单轴压缩试验中，不同的材料配比和加载速率将直接影响到相似材料的变形与强度特性。
As for material's performance under the effect of dynamic loading, it plays an important role for welding residual stress in the analysis of material fatigue strength.
对于材料承受动力载荷性能的影响而言，焊接残余应力对材料疲劳寿命的影响是重要的。
All these results showed the close relationship of SCC sensitivity with the surface state of the material under dynamic loading conditions, SRB activity and hydrogen permeation characteristics.
这些结果说明，海洋用钢的应力腐蚀开裂敏感性与加载条件下材料的表面状态，SRB活动和渗氢特征有密切关系。
The construction of FEM model, material parameters, boundary conditions and loading definition are introduced in details.
详细介绍了有限元模型的建立，材料参数、边界条件及载荷的定义。
The cyclic loading not only affect the inner part of the material but also the surface state of the corroding surface.
交变载荷不但影响了材料的内部，同时也影响了腐蚀表面的表面状态。
For brittle material testing, the governing equation of input waveform for attaining constant strain-rate loading is given.
给出了测试脆性材料时实现恒应变率加载的加载条件。
Different tensile rates were adopted during the experiment, and the influence of loading rate on the mechanical properties of the composite material was analyzed thoroughly.
采用不同的拉伸速率对复合材料加载，分析了加载速率对复合材料性能的影响。
The mechanical material constant of ascending aorta at one-dimensional loading of human was basically familiar to that of swine of 1 to 7 months(P > 0.05).
人与1～7月龄猪升主动脉一维载荷下力学材料常数比较基本相似（P>0.05）。
The relation of thermal and temperature of material is studied through thermal loading.
对热载荷加载研究了材料的应力与温度之间的关系。
Which can quantitatively reflect the effects of cyclic loading conditions, material properties and corrosion environment on the initiation life and propagating rate of the cracks.
这些表达式能定量反映循环加载条件、材料性能及腐蚀介质对裂纹起始寿命和裂纹扩展速率的影响。
The proof material is the material carrier? Of the proof information, and also the loading to know the proof fact.
证据材料是证据信息的物质载体，也是认识证据事实的凭借物。
The effects of loading rate, interfacial adhesive energy, relaxation time of matrix material, average size of particles, and the particle-size dispersity on the energy dissipation are discussed.
在此基础上，计算了材料中的粘性耗散功和损伤耗散功，并讨论了加载速率、界面粘结能、基体材料的松弛时间、平均粒径和粒径分散度等对这两种耗散机制的影响。
The effects of loading rate, interfacial adhesive energy, relaxation time of matrix material, average size of particles, and the particle-size dispersity on the energy dissipation are discussed.
在此基础上，计算了材料中的粘性耗散功和损伤耗散功，并讨论了加载速率、界面粘结能、基体材料的松弛时间、平均粒径和粒径分散度等对这两种耗散机制的影响。
应用推荐