This paper mainly to optimize LS line to achieve the load sensing system characteristics.
该文主要对某负载敏感系统挖掘机LS管路进行优化，以实现负载敏感系统的控制特性。
That can be realized by load sensing, bypass throttling and power source of constant flow.
减少压力过剩可采用负载感应，旁路节流和恒流动力源实现。
Load sensing system have the advantage of loss low power, high efficiency and fast response.
负载敏感系统功率损耗低、效率高，响应速度快。
Automatic load sensing automatically detects power over Ethernet on the end device before providing power.
负载传感自动检测自动对终端设备上的以太网在提供电源电源。
Load sensing control can be achieved with our DPK load sensing valve, resulting in energy savings for mother machine.
负荷传感控制，才能实现我们的通dpk负荷传感阀，能源节省了母亲的机器。
Bypass flow control and definition work current capacity (working speed) scope load sensing control valve disposition.
旁路流量控制与限定工作流量(工作速度)范围的中的负载传感控制阀配置。
When the parameters of components and system meet a certain condition, the models of load sensing system are simplified.
并讨论了当元件参数满足某些特定条件时，模型的化简问题。
All ports have automatic load sensing circuitry that automatically detects PoE on the end device before providing power.
所有端口都具有自动负载检测电路，可以自动检测在提供终端设备上的电源供电。
Hydraulic Load sensing speed control system has advantages of saving power, reducing the generated heat in the system, etc.
液压负载传感调速具有节省功率和减少系统发热量等优点。
The control of load sensing is an advanced hydraulic technology which is demonstrated with the trend of application in construction machinery.
负载传感控制作为一种先进的液压技术，近几年在工程机械上展现了其应用趋势。
It is very important to calibrate the load sensing and indicating devices (IMCO) which are used as the forging force indicating and forging machine protecting devices.
负载传感及指示装置(IMCO)作为锻压力指示和锻压机保护的装置，对它进行适时标定，尤为重要。
All hydraulic load sensing steering that supplies oil on demand preferentially and valve working hydraulic system of single pump priority are economic and energy-saving.
优先按需供油的全液压负荷传感转向及单泵优先阀门工作液压系统，经济节能。
Based on the principle of power bond graphs, the modeling method for the hydraulic steering control unit type BZZ5 with the load sensing hydraulic steering system is introduced.
依据功率键合图原理，研究BZZ5型液压转向器和负荷传感全液压转向系统的建模方法。
Electro-hydraulic proportional sectional valves are realized with load sensing control, and the pump output power is adaptive to load, the system effectiveness is highly enhanced.
通过对电液比例多路阀进行负载敏感控制，实现泵和负载之间的功率匹配，显著提高系统效率。
In this paper the working principle, design methods, application scope and calculation equations of inertia proportion valve and load sensing proportion valve are described with desi...
论述了惯性比例阀和感载比例阀的工作原理和设计方法、应用范围和计算公式，并以实例进行了设计计算。
There are mainly two problems caused by long pipes in load sensing system. One is the stability of load sensing variable displacement pump and another is the response lag of feedback pipe.
从中发现了长管道给负载敏感系统所带来的两个主要问题，即负载敏感变量泵的稳定性问题和反馈油路响应滞后问题，从而确定了本文的理论研究方向。
With remote sensing, external sense connections are made across the load.
在采用遥感时，在负载两端进行外部测量连接。
Additionally, the coordinate principle of variable displacement pump with constant power control and load-sensing control system is demonstrated, and establish the constant power control model.
针对液压泵恒功率调节系统，建立了动态数学模型并对恒功率调节与负载传感系统的控制协调机理进行分析。
The temperature coefficient of modulus of elasticity of sensing element material result in temperature effect on rated output of strain gauge load cell.
应变式负荷传感器额定输出温度影响是由于弹性体弹性模量的温度系数引起的。
This paper applies load-sensing variable pump to the hydraulic system of loader considering the matching of pump and the load.
本文从液压泵与负载匹配的角度出发，将负载敏感变量泵应用到装载机工作装置液压系统的设计中。
The paper proposes a new method to realize constant power control for electrohydraulic proportional load-sensing radial piston variable displacement pump.
本文提出了对电液比例负载敏感径向柱塞变量泵实现恒功率控制的新的控制方法。
Based on the differences of harmonic testing point, there are two control ways for shunt active filters, that is, the way of load current sensing and the way of power supply current sensing.
并联型有源滤波器根据其谐波检测点的不同，有两种控制方法。即负载电流检测控制方法和电源电流检测控制方法。
A new load-sensing method to control the moving velocity and pressure of actuating mechanism by controlling the displacement of proportional overflow valve is introduced.
本文介绍了通过控制比例溢流阀排油流量，控制执行机构运动速度和压力负载敏感的新方法。
The structure of a new kind of load-sensing counter-balance valve is introduced, the work principles and the structure features are analyzed, and the structure design of key parts is discussed.
介绍了一种新型负载敏感平衡阀的结构，分析了其工作原理及结构特征，并探讨了关键零件的结构设计。
The PMFBG sensing experimental systems of temperature, axial strain and transverse load were set up, respectively, and the corresponding experiments were carried out.
分别搭建了保偏光纤布拉格光栅的温度、轴向应变和横向负载传感实验系统并进行了实验研究。
The combined use of ABS System & Load-Sensing Proportion Valve is an effective brake pressure regulation method which has high reliability.
综合考虑ABS系统与感载比例阀组合使用是行之有效的，且是可靠性高的制动压力调节方法。
Battery over-voltage sensing allows the IC to stand-off up to 50 v, allowing the chip to meet automotive IC load-dump requirements.
电池过电压感测允许IC承受高达50伏特的电压，让芯片可满足汽车IC负载突降要求。
The algorithm is implemented by using the linear least square method, thus making it possible to design an advanced load-sensing instrument for weigh-in-motion.
最后运用线性最小二乘法，实现了该算法，并采用该算法设计了先进的动态称重仪。
Variable displacement pump's control style has many ways, such as constant pressure, constant fluid, constant power, electrohydraulic proportional and load-sensing etc.
变量泵的控制方式有恒压力、恒流量、恒功率、电液比例和负荷敏感控制等。
Variable displacement pump's control style has many ways, such as constant pressure, constant fluid, constant power, electrohydraulic proportional and load-sensing etc.
变量泵的控制方式有恒压力、恒流量、恒功率、电液比例和负荷敏感控制等。
应用推荐