Because of its excellent part load efficiency, many compressor unit is used mainly in the occasions for large displacement in high pressure piston compressor applications.
由于其出色的部分负荷效率，多压缩机机组主要应用于的场合为大排量中高压活塞式空压机应用领域。
With standard, non-cycling refrigerated dryers the compressor remains on whether there is a high or low load.
有了标准，非循环压缩机上是否有高或低负荷仍然冷冻干燥机。
At the same time, because of double screw compressor stress is bad, bearing load, its mechanical noise than single screw compressor.
同时，由于双螺杆压缩机受力不好，轴承受力大，其机械噪声也要比单螺杆压缩机要大。
We should gradually increase the pressure of the compressor and step into the full load operation.
我们应该逐渐的增加压缩机的压力，并逐步投入满负荷运行。
Rotary compressor is most suitable for close to full load operation conditions of the compressor compressed air system.
旋转式压缩机最适用于接近压缩机满负荷工况下运行的压缩空气系统。
Compressor capacity adopts many sections or no sections, providing a wide range of capacity, good load performance, stability and high reliability, greatly improving the ability of energy-saving.
压缩机容量控制采用多段式或无段式，提供更大范围的制冷量，载荷性能好，稳定性和可靠性高，可大大提高节省能源。
Reciprocating air compressor is very suitable for compressed air system, because in most cases it won't full load.
往复式空压机非常适合压缩空气系统，因为在绝大多数情况下它都不会满负荷工作。
Applicable to fixed or mobile sliding vane type and screw air compressor, especially suitable for load operation.
适用于固定或流动式的滑叶型及螺旋型空气压缩机，特别适用于负荷的操作。
On the other hand, according to the energy department in 2002 the investigation report, countries the air compressor load rate almost can not be more than 90%.
另一方面，根据美国能源部2002年的调研报告，各国空压机使用的负载率几乎不可能超过90%。
So, choose the high efficiency compressor, building intelligent matching load compression machines control nets the economic viability of particularly remarkable.
所以，选用能效高的压缩机、构筑智能匹配负载的压缩机群控制网所带来的经济效益尤为显著。
In an aromatic complex unit, the main cause for decrease in hydrogen compressor load was scale formation in steam condenser.
芳烃联合装置凝汽器的结垢是氢气压缩机负荷降低的主要原因。
With the compressor don't need to load, motor can unrestricted, stop, and energy consumption will be zero.
当空压机不需要负载时，电机能无限制地启、停，将能耗降为零。
With the pressure machine load rate below 25%, air compressor no-load running power consumption need not, and can be directly downtime, energy consumption will be zero.
当空压机负载率低于25%时，空压机不需要空载运行消耗电能，而可直接停机，将能耗降为零。
Therefore, air compressor operation, in addition to saving energy from a full, the energy consumption of the lower than input, and in part load and load without also want to energy conservation.
因此，空压机要运行节能，除了满载时，输入的能耗比要低，而且在部分负载和无负载时也要节能。
When a low load situation has been determined by the refrigerant system controls, the variable speed drive operates the compressor motor at lower speed mode of operation.
在制冷系统控制器确定为低负荷情况时，可变速驱动控制器以运转的较低速度模式操作压缩机马达。
The figure that the solid line at different engine speeds to provide the maximum torque, while the dotted line that the normal load changes in the work of the compressor torque needed.
图中实线表示发动机在不同转速下能提供的最大转矩，而虚线表示负荷变动时压缩机正常工作需要的转矩。
X1 indicates the load matching of gas engine and compressor, X2 indicates the load matching of gas engine and generator.
定义了燃气机与压缩机的几何匹配准则式X_1和燃气机与发电机的几何匹配准则式X_2。
No fuse breaker, over pressure, over heat and over current protectors for compressor, over temp. protector, over load protectorof fan, dry heat pr techto.
无熔丝开关，压缩机超压，过热，过电流保护超温保护，风机过载保护，保险丝，干烧保护器，缺水保护。
Therefore the reciprocating compressor according to the invention can reduce the load of a compressing unit and can enlarge the displacement amount relatively to the output of the driving unit.
据此，根据本发明的往复式压缩机能够降低压缩单元的负荷，并且相对于驱动单元的输出而能够扩大排出量。
The method is introduced to develop mathematical model of gas turbine, centrifugal compressor and gas transmission pipeline needed for load assignment optimization.
介绍了建立优化调度所需的燃气轮机、离心压缩机和输气管线模型的方法。
Unit by high performance liquid strike prevention scroll compressor saut low-load start-up device, make refrigeration core part of the life is greatly increased.
机组采用高性能涡旋压缩机兼用防液击低负荷启动装置，使制冷的核心部份的寿命大大提高。
The speed of the compressor is varied to control the refrigerant flow rate and match the cooling load requirements of the vapor compression system.
该压缩机的速度被改变以控制该制冷剂的流速和配合蒸气压缩系统的冷却负荷需求。
After improving, the temperature and pressure of CO2 decreased, the CO2 pressure was controlled within the set values, the load of CO2 compressor was reduced, and the waste…
改进后降低了CO2温度和压力，使其压力值控制在设定值内，减少了其压缩机的负荷，避免了CO2浪费。
The heat calculation would be different because of dissimilar thermal calculation in the turbo-compressor when the boiler load was changed.
由于涡轮增压机组在不同负荷下的热力计算不同而造成增压锅炉在不同负荷下的热平衡计算的不同；
The impact load stress on the working process of the ring valve of reciprocating compressor is analyzed in this paper.
本文对往复式压缩机环状阀工作过程冲击应力进行了分析。
With the compressor in part, motor load can change speed, with gas and still maintain a high efficiency;
当空压机处于部分负载时，电机能随气量改变转速，并仍保持高的效率；
Testing the compressor motor amp load before and after your maintenance procedure can give a measure of improved energy efficiency.
测试压缩机电机放大器负荷前，后的维修过程，能对提高能源效率的措施。
During a compressor testing, slipping and rub under light load caused the assistant fulcrum ball bearing cease to be in effect and get damaged.
在某型发动机压气机部件试验过程中，试验件的辅助支点滚珠轴承由于轻载打滑造成轴承失效，导致试验件辅助支点被损坏。
During a compressor testing, slipping and rub under light load caused the assistant fulcrum ball bearing cease to be in effect and get damaged.
在某型发动机压气机部件试验过程中，试验件的辅助支点滚珠轴承由于轻载打滑造成轴承失效，导致试验件辅助支点被损坏。
应用推荐