Disc spring load-deformation characteristics can directly affect pneumatic DTH hammer system vibrations.
碟形弹簧的载荷变形关系直接影响潜孔锤系统振动特征。
The calculated value coincides with the actual case within the range of the straight line in the curve of the load-deformation relationship.
该公式在荷载——变形关系曲线的直线范围内计算值与实际情况基本符合。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
A new evaluating indicator, load-deformation under high temperature, was introduced based on the working condition of ceramic foam filters for casting.
基于铸造用泡沫陶瓷过滤器的使用环境，引入了高温负荷变形新的评价指标。
The mechanical behavior of the disc-spring was analyzed. The load-deformation relation of the disc-spring considered frictional action has been inferred.
本文对碟形弹簧的受力特性进行了分析，导出了考虑摩擦力影响时碟形弹簧的荷载—变形关系；
This paper analyses the load-deformation and the whole deformation of the system joint when it is in the single direction drag and the destructive quality of joint connection.
本文对该体系的节点进行了单向拉伸情况下的应变变化情况及其整体变形、节点连接破坏情况性质的分析。
Contact, can be very good habit of foundation deformation; can absorb the energy from the external dynamic load, with excellent seismic function and anti shock ability.
联系，能极好的习惯地基变形；能吸收来自外部的动荷载所发生的能量，具有极好的抗震功能以及抗冲击才能。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
The stress characteristic of the interface, deformation rule under the action of load and the stress distribution rule were discussed by adopting the experimental research method.
采用实验研究的方法，探讨锚固体界面力学特征、在荷载作用下变形规律以及界面上的应力分布规律。
The structure and load form of the absorbing tower is complex and regular design and calculation method cannot give its distribution condition of the stress and deformation.
脱硫吸收塔结构及荷载形式复杂，常规设计计算方法不能给出其应力和变形分布情况。
In a leader, installed in the upper crossbeam gabion stone kg, plus kg load under the action of external load, while the central beam bending deformation, but the wire cage has not broken beam.
在一组长，内装公斤块石的铅丝笼横梁上部，加上公斤的荷重，在外荷作用下，梁的中部虽然发生弯曲变形，但铅丝笼梁却始终未断裂破坏。
In this paper, the stress and deformation of three different structuring forms of ship hull are analyzed under the conditions of the same external load and the equal mass structure.
本文在外载相同、艇体结构质量相等的条件下，对三种不同结构形式的艇体进行了应力与变形分析。
So macroscopical damage mechanism of rock mass should research through its load and deformation law.
所以煤岩的宏观破坏机理应从其荷载以及变形规律来研究。
Therefore, it has great significance to study on the load transfer mechanism and deformation characteristics of composite ground under flexible foundation.
因此开展柔性基础下复合地基的荷载传递规律及其变形特性的研究具有重要意义。
Based on the mechanism of load transfer and deformation of discrete material piles, the relationship between stress and strain of pile and soil is analyzed.
根据散体材料桩复合地基荷载传递及变形机理，分析了散体材料桩与桩间土之间的应力应变关系。
Most structural materials are not only elastic but within limits, linearly elastic; their deformation is proportional to the load.
大多数结构材料不仅有弹性，而且在一定限度内具有线性弹性；其变形与负荷成正比。
Using an empirical cumulative plastic strain formula, a method for calculating the traffic load induced deformation was proposed.
针对交通荷载作用下软土地基的变形问题，采用累积应变的经验公式计算其累积沉降。
This article discusses the joint-types of buckle-type steel tubular scaffold, and analyzes the experiments with load-bearing capacity and load deformation.
本文对扣件式钢管脚手架杆件接头型式问题，从承载能力，受荷变形方面进行了试验和分析。
The problem is considered as dynamic response of the structure subjected to specified initial velocity or impulse load, with large deformation and plasticity.
问题被当作结构在规定初速度或脉冲载荷作用下的非线性(大变形与弹塑性)动反应。
Then, the joint should be of the ability of resisting to all physical actions, such as various load and deformation, earthquake, and temperature variation etc.
其次，应具有抵抗各种作用的能力，这些作用包括各种荷载和强迫变形，诸如地震、温度和地基变形等；
Tunnel cross section deformation ellipse reflects the deformation of tunnel segment under external load.
隧道横断面变形椭圆反映隧道承受外部载荷后的变形情况。
Impact rupture suface of the composites was observed by scanning electron microscope, and the load deformation temperature and mechanical properties were tested.
通过扫描电镜观测了复合材料冲击断面的形貌，测试了复合材料的负荷变形温度和力学性能。
In such a problem, the relations between the load and deformation, and between the load and stress are nonlinear.
在这类问题中，载荷与变形、载荷与应力之间的关系是非线性的。
Under constant load, the plastic deformation increased when the tendon under went a prolonged stretch or under warmer temperature.
在恒定载荷下，随持续拉伸时间延长或温度升高，肌腱的塑性变形明显增加。
In this region, known as the plastic region, plastic deformation takes place and when the load is removed, the material will not return to its original dimensions.
在这个区域，称为塑性变形区域，当载荷消除之后会产生塑性变形，材料无法恢复原来尺寸。
Relevant conclusions of structure deformation are gotten through the analysis of deformation curve of static load test of bridge span.
通过对该桥梁跨度静荷载检验变形曲线进行分析，得出了其结构变形的有关结论。
The precise relation among the load, degree of deformation and friction is found on the experimental results.
试验中得到了载荷、变形度和摩擦力相互问的确切关系。
Test showed that the cracking load, the strength and the deformation capacity of the corbel thus strengthened were all increased in some degree.
试验征明，牛腿采用上述方法加固后，其抗裂度、强度和变形能力均有不同程度的提高。
In order to analyze the load deformation, a single spring dual moment inertia model was used to model the load of dual hydraulic motor synchronizing driving (DHMSD) system.
针对双液压马达同步驱动系统建模过程中存在负载变形考虑不足的情况，采用单弹簧、双惯量块代替单惯量模型建立负载动力学模型；
The function, construction, load and deformation, strength conditions, as well as the manufacturing process of the elastic elements in the.
分析和研究了汽车离合器自动调心分离轴承弹性元件的作用、结构形式、载荷与变形关系，以及强度条件和制造工艺。
应用推荐