It expounded the research advancement of LLDPE blown film in recent years.
论述了近年来lldpe吹塑地膜研究进展情况。
Resins produced by these processes are known as the second generation LLDPE.
由这些工艺生产的树脂，就是通常所说的第二代LLDPE树脂。
Designed for punching holes in LLDPE (Linear Low Density Polyethylene) film.
冲压设计在LLDPE洞(线性低密度聚乙烯)薄膜。
Urine-wetness scrap was selected as core of aluminum-plastic panel replacing LLDPE.
用尿不湿边角料代替线型低密度聚乙烯（ LLDPE）作为铝塑板的芯层。
This paper deals with the foaming of Linear Low Density polyethylene (LLDPE) with filler.
本文介绍了用线型低密度聚乙烯(LLDPE)进行填充发泡的试验结果。
So LLDPE powder material should not be processed to degradable plastics by adding photo-sensitizers.
因此，LLDPE粉料不适于添加光敏化剂加工成可控降解塑料。
Required film is a hexene LLDPE and LDPE product that possesses good puncture and impact resistance.
需要的薄膜是具有好的抗挤压的己烷低密度聚乙烯及低密度聚乙烯产品。
The advantages disadvantages and feasibility of condensation state operation in LLDPE unit are introduced.
介绍了冷凝态操作在LLDPE装置的优缺点以及可行性。
The influence of nucleating transparent agent on the structure and the properties of LLDPE was researched.
研讨了添加成核透明剂等对线型低密度聚乙烯（ LLDPE）结构与性能的影响。
The flow behaviour of LDPE/LLDPE blend melt and its influential factors in capillary extrusion are investigated.
考察了毛细管挤出过程中LDPE/LLDPE共混物熔体的流动行为及其影响因素。
The tensile strength for LLDPE/EVA blends increases as ATH content is increased, but elongation at break decreases.
随着ATH含量的增加，LLDPE/EVA共混物的拉伸强度逐步增加，断裂伸长率迅速下降。
The Numatics Actuator Group hole punch Cylinder is perfect for punching holes in LLDPE (Linear Density Polyethylene) film.
纽曼帝克集团的执行机构气缸孔打孔机非常适合在LLDPE冲压洞(线性低密度聚乙烯)薄膜。
The safety demonstrations for powder material conveying systems on Daqing Petrochemical Company LLDPE units are conducted.
针对大庆石化分公司线性低密度聚乙烯装置粉料输送系统进行安全性论证。
The effect of blends of LDPE/LLDPE as a carrier resin in black masterbatch, on the dispersion of carbon black was studied .
研究了作为黑母粒载体树脂的LDPE/LLDPE共混物对炭黑分散性的影响。
The influence of small grain size glass bead (GB) on the properties of linear low-density polyethylene ( LLDPE) was studied.
研究小粒径玻璃微珠的粒径和用量对线形低密度聚乙烯（LLDPE）性能的影响。
The paper briefly introduces LLDPE production, supply and demand in the world, especially in north America and western Europe.
概述了世界，特别是北美和西欧LLDPE的生产、供需情况。
A packing film of polyvinyl soymilk is prepared by taking HDPE, LLDPE and color mother material as raw materials and extruding.
提供一种聚乙烯豆奶包装膜，它采用高密度聚乙烯(HDPE)线性低密度聚乙烯(LLDPE)、色母料原料，经挤出工艺制成。
The key technical questions in producing carbon black masterbatch for coloring of LLDPE mulching film in China and abroad were reviewed.
论述了国内外LLDPE地膜着色专用碳黑母粒制造中的技术问题。
There is no polar radical on the macromolecules of LLDPE. It has poor adhesion to many substrates such as metal, plastics, glass and paper.
在LLDPE的大分子上没有极性基团，它与很多基材如金属、塑料、玻璃和低的粘结力很差。
The effect of nucleation agents on the crystalline structure, mechanical properties and transparency of blown molded LLDPE films were evaluated.
研究了成核剂对LLDPE吹塑薄膜结晶结构，进而对薄膜的透明性和力学性能的影响。
This paper introduced the evaluation of domestic titanium tetrachloride BL-828 in line low density polyethylene (LLDPE) plant using of BP process.
介绍了国产四氯化钛BL- 828在BP工艺生产线型低密度聚乙烯(LLDPE)工业装置上的评价情况。
Probably due to different polymerization techniques, the LLDPE has more unpolymerized monomers inside, which will leach out when soaked in solvent.
因此我们估计，由于聚合方法不同，线性低密聚乙烯存在较多的未聚合单体，浸泡在溶剂中时易于析出。
However, due to its high health indicators, LDPE, especially the production of LLDPE resin has become a commonly used pipe materials drinking water.
但由于其卫生指标较高，LDPE特别是LLDPE树脂已成为生产饮用水管的常用材料。
The results show that: the kind of PE influences the graft rate and MFR of the product directly, the sequence of grafting ability is LDPE>LLDPE>HDPE;
实验结果表明：产物的接枝率和熔体流动速率（MFR）变化与聚乙烯的种类有直接关系，接枝性能从优到差的顺序为： LDPE> LLDPE> HDPE；
This paper elucidated the theoretical basis for controlling the fluidization parameters by calculating the SGV surface gas velocity in he LLDPE reactor.
通过对LLDPE聚合反应器表观气速(sgv)值的计算，为流化参数的控制提供了理论依据。
The haze of the LLDPE film modified by YS-1 was less than 11% , and the tensile strength and elongation at break of the modified film were all increased.
用其改性生产的透明LLDPE专用料的雾度降至11%以下；膜的拉伸强度、断裂伸长率亦有所提高。
This paper introduced the properties of linear low density polyethylene (LLDPE) TJDL-9270 in the application as cable base resin and its development process.
介绍了线型低密度聚乙烯(LLDPE)电缆料TJDL- 9270的性能特点和开发过程。
The complex additive formulation YS-1 fort he special compound for transparent LLDPE film was developed by means of post-modification of additive formulation.
采用助剂配方后改性的技术方法，研制开发出生产透明线型低密度聚乙烯(LLDPE)膜专用料的助剂配方体系Y S - 1。
The results showed that LLDPE with a density of 0. 92~0. 94 and a narrow composition distribution can be easily produced by the bifunctional catalytic systems.
结果表明，利用双功能均相催化体系可方便地获得相对密度为0．92～0．94、组成分布窄的线型低密度聚乙烯。
The results showed that LLDPE with a density of 0. 92~0. 94 and a narrow composition distribution can be easily produced by the bifunctional catalytic systems.
结果表明，利用双功能均相催化体系可方便地获得相对密度为0．92～0．94、组成分布窄的线型低密度聚乙烯。
应用推荐