The remaining carbon of the liquid resin is 49% by adopting best technology.
采用最优化工艺合成的液体树脂残碳量达到49%。
The viscosity of liquid resin is an important index for manufacturing resin bonded abrasive products.
在树脂磨具制造中，树脂液的粘度是一项重要指标。
If the volatile vapor pressure in the curing laminate exceeds the actual pressure on the liquid resin prior to gelation, then void formation and growth will occur.
如果树脂凝胶前挥发物的蒸气压力超过树脂流体的压力，则会在层板中生成孔隙，而且孔会长大。
The bark was stretched over frames made from tree branches, stitched together and sealed with resin—you know that the sticky liquid that comes out of the tree—and when it dries, it's watertight.
树皮在用树枝做好的框架中被拉长、延展，然后缝合在一起并用树脂密封好，就是那些从树中流出的黏黏的液体。当它干了以后就不漏水了。
The heat transforms the liquid into a resin, which makes the cell walls of the wood thicker and stronger.
液体就会在高温下变成一种树脂，可以使得木材的细胞壁变厚。
To make their spheres Dr Yin and his colleagues stir iron-oxide particles into a liquid polymer resin, which is then dispersed in oil.
为制造出微滴球体，Yin博士和同事把氧化铁粒子放入液体聚合树脂搅拌后散入油中。
Liquid or blend of liquids used to dissolve or disperse paint. A true solvent is a liquid that can dissolve the paint resin.
在油漆中起溶解和分散作用的液体或液体混合物，真正的溶剂是一个能够溶解油漆树脂的液体。
A review is given to the progress of one-package liquid epoxy resin coatings in recent years.
本文综述了近年来一液型环氧树脂涂料的新进展。
The polyurethane waterproofing paint without tar is produced with certain liquid hydroxylated resin instead of coal tar.
以一定量液态的羟基树脂替代煤焦油制作无焦油型聚氨酯防水涂料。
The gelation time of this epoxy resin with modified liquid anhydride was related to the chemical structure and the composition of epoxy resin, curing temperature and accelerator.
环氧树脂与改性液体酸酐体系的凝胶时间与环氧树脂的结构与组成、固化温度及促进剂等因素有关；
Epoxy resin toughened by liquid polysulfide rubber exhibits good anti-impact performance and anti-bend performance.
液态聚硫橡胶增韧的环氧树脂胶表现出良好的抗冲击性能和抗弯曲性能；
The effect of electrocast zirconia and monocline zirconia and two types of binders(anhydrous and un-hydroxyl resin and liquid paraffin)on the sintering of fired magnesia-calcia brick are investigated.
研究了电熔氧化锆、单斜氧化锆和两种结合剂（无水无羟基树脂和液体石蜡）对烧成镁钙砖烧结性能的影响。
Toughening of epoxy resin by modification with acrylate liquid rubber containing pendant epoxy groups was investigated.
研究了含环氧基团丙烯酸酯液体橡胶对环氧树脂三乙醇胺固化体系的增韧作用。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
Undesirably the toughening effect of liquid rubber in unsaturated polyester resin is much weaker than in epoxy resin.
遗憾的是液体橡胶增韧不饱和聚酯树脂的效果远不如对环氧树脂的增韧。
Liquid alkoxysilyl -functional silicone resins, method for their preparation, and curable silicone resin compositions.
液态烷氧基甲硅烷基官能的硅氧烷树脂，其制备方法，及可固化硅氧烷树脂组合物。
The experiments show that foam resin finishing, combined with liquid ammonia pretreatment, does phenomenally promote laundry resistance and improve the balance between tensile strength and resilience.
实验证明：液氨处理结合泡沫树脂整理，提高了耐洗性、改善了强力与弹性之间的平衡。
Single liquid type or double liquid epoxy resin, polyurethane, silicone etc.
单液型或双液型环氧树脂，聚氨酯，硅胶等。
From experiments the results are followed: 1 While selecting the mixed resin liquid, Conversion Loading decide the performance of the resin liquid.
由试验结果得出如下结论：1在选择混合树脂液时，转化率的大小决定了树脂液的优劣。
The recent developments for the synthesis of reactive acrylate liquid rubber and the toughening of epoxy resin with acrylate liquid rubber were reviewed in this paper.
综述了反应性丙烯酸酯液体橡胶的合成方法及其用丙烯酸酯液体橡胶增韧环氧树脂的研究进展。
Started from dicyclopentadiene, a novel, liquid, trifunctional cycloaliphatic epoxide resin was synthesized and characterized.
以双环戊二烯等为原料合成一种新型三官能团液体脂环族环氧树脂。
The substitution of UF resin in making flakeboard with bluish dogbane pulping waste liquid and bluish dogbane pith was studied.
利用麻杆制浆废液和废弃麻芯代替部分脲醛胶及刨花压制刨花板的研究。
A branched fluorine - containing acrylic resin has been developed through solution polymerization at normal pressure with liquid fluorine - containing acrylic acid monomer and acrylate monomers.
将液态含氟丙烯酸单体与丙烯酸酯类单体采用常压溶液聚合工艺，合成了支链含氟的丙烯酸树脂。
Soak to have done experiment research with water quantity and the influence of soaking time to absorbing the resin in the liquid rate measurement.
对吸液率测定中树脂浸泡用水量和泡时间的影响作了探索。
The process of rotational foaming molding of liquid reactive resin was studied, with unsaturated polyester resin as the shell of unfoamed resin moulded part, and polyurethane as foamed core layer.
以不饱和聚酯树脂作为非发泡树脂成型制品的外壳，用聚氨酯树脂发泡形成泡沫芯层，研究了液体反应树脂的旋转模塑发泡成型泡沫夹层制品的工艺过程。
The optimized colloid resin liquid is prepared by blending 30% of polyacrylic acid compound and 70% of water.
最为优选所述胶质树脂液体为30%的聚丙烯酸化合物和70%的水勾兑制成。
The curing temperature of the liquid phenolic resin was slightly lower than that of powder phenolic resin.
液体酚醛树脂的固化温度稍低于粉状酚醛树脂。
The results show that under general conditions of reaction, most of resin is converted into liquid, but most of asphaltene is converted into coke.
结果表明，在通常的反应条件下，胶质大部分转化为液体，沥青质大部分转化为焦炭。
To ensure the adhesion effect of the colloid, in the process of sewing, the sewing threads are placed in a container containing the colloid resin liquid.
保证胶质的附着下过，进行缝纫时过程中，缝纫线放置于盛装有所述胶质树脂液体的容器中。
The toughening of DAIP resin with liquid nitrile-butadiene rubber, polybutadiene, polyether, silicone rubber, unsaturated polyester and vinyl resins was investigated.
用液体丁腈橡胶、聚丁二烯、聚醚、硅橡胶、不饱和聚酯和多种乙烯基酯树脂为改性剂，研究了它们对DAIP树脂的增韧作用。
应用推荐