The samples showed typical properties of supercooled liquid in the supercooled liquid region.
在过冷液相区，样品表现出所有过冷液体的特征。
Superplastic behaviors of bulk amorphous alloys in the supercooled liquid region were reviewed.
对大块非晶合金在过冷液相区内的超塑性变形特点进行了评述。
It is shown that the rapid viscous flow deformation, forming, welding can be carried out in the supercooled liquid region.
结果表明，在过冷液相区内能够进行快速粘滞流动变形、粘滞成型和粘滞连接；
The forming techniques, evaluation systems and FEM application of bulk amorphous alloys in supercooled liquid region are summarized in this paper.
综述了大块非晶合金在过冷液相区微塑性成形的工艺、成形性能评价及有限元技术应用方面的研究进展。
Bulk metallic glassy alloys have almost theoretical high strength, excellent wear properties, good forming ability and thermal stability in the supercooled liquid region.
块状金属玻璃合金作为一种新型材料，具有高强度、良好的耐磨性能以及在过冷液态区内良好的加工成型性能和热稳定性。
The isothermal compression behaviors of MgCu-Y7Nd bulk amorphous alloy nearby the glass transition temperature (Tg) and at temperature in the supercooled liquid region are observed.
研究了MgCuY7Nd大块非晶合金在玻璃转化温度Tg附近及深过冷液相区的等温压缩变形行为。
Traveling on a nearly circular, 229-day orbit around both host stars, the planet lies outside the system's habitable zone—the region where liquid water, and thus life as we know it, could exist.
它的运行轨道为近似的圆形，以229天为周期，围绕着两个恒星作轨道运行，这个行星位于这个系统的可居住区之外——所谓可居住区，那里有液体水，正像我们所知道的那样，那里可能会有生命的存在。
Exoplanet hunters announced a new world orbiting in its dim star's habitable zone, the not-too-hot, not-too-cold region where liquid water is stable and life could potentially find a foothold.
太阳系外行星搜索者宣布发现了一个新行星，环绕其遥远恒星的可居住带运行，这一区域既不太热，也不太冷地区有稳定的液态水，有可能成为生命的一个立足之地。
The planet lies in the star's 'Goldilocks zone' - the region in space where conditions are neither too hot or too cold for liquid water to form oceans, lakes and rivers.
这颗行星位于恒星的“适居带(Goldilocks zone)中”，所谓适居带指的是位于该区域的行星气候不会太冷也不会太热，有形成海洋、湖泊和河流的液态水。
Heat transfer in a gas or liquid by the circulation of currents from one region to another.
气体或液体中通过从一层到另一层的气流(或水流)循环进行的热传递。
The thermal non-equilibrium distribution through the interface region is caused by the energy transport between the liquid and the vapor phase.
对于平衡条件下的汽液界面，由于汽液相变的影响，在紧贴界面处存在一个分子平均动能非平衡分布的区域。
In every region, the gas hold-up increases with the liquid rate.
在每一区内，气含率都随液体流率的增加而增加。
Based on the flow mechanism and performance of gas liquid two phase plug flow in oil gas gathering line, a slug unit are divided into both gas slug region with liquid film and liquid slug region.
针对油气集输管线中气液两相团状流的流动机理和特点，将每一段塞单元划分为带液层的气塞区和液塞区两个区域。
Due to the limitation of the resolution, experimental investigations on the liquid flow in the region near the contact line are scarce.
由于系统分辨率的限制，关于液滴接触线附近区域液体流动的实验研究较少。
Finally, the temperature relation of configurational entropy and isobaric capacity are described in the glass - liquid transition region.
描述了液-玻相变温区构型熵的温度变化规律及其与等压热容的关系。
A liquid supply communicates with the central tank for feeding liquid to the interior region.
通过与液体供应料液中央油箱通往内陆的地区。
In this paper, the conditions of bubble flow region existence are studied for upward gas-liquid two-phase flow in the vertical tubes.
文章对垂直上升管内气液两相泡状流的存在条件进行了研究。
The disequilibrium of the enthalpy difference of helium at liquid - helium temperature region results in that the temperature distribution in the regenerator of a GM refrigerator forms a platform.
由于在液氮温区附近氦气高低压焓差不平衡，导致G-M机蓄冷器中温度分布出现低温平台。
Equivalent latent heat was adopted to determine liquid quantity and solid-liquid identity was adopted to solve moving interface between molten and solid region.
采用等效比热法来确定液相分数，假定固液相等同区来解决工件熔化区与非熔化区的移动边界。
One of them is pure evaporation heat transfer model in the extended thin film region near the triple-phase contact line of vapor-liquid-solid at lower input heat flux.
一种是较低热负荷下的单一的微槽内三相接触线附近薄液膜区域中薄液膜的高强度蒸发换热机制（纯蒸发模式）；
The composition region showing superconductivity above liquid nitrogen temperature has been found.
摸清了该系统中在液氮温区呈现超导电性的材料组成范围。
The pound region volume of the baffle C type is still too small, so the liquid steel can't mix sufficiently, and the average residence time in the tundish is short.
型挡墙，冲击区体积较小，钢液混合不均匀，钢液在整个中间包内的平均停留时间较短。
Argon bubbles distribute unevenly and the gas holdup of liquid steel in the upper region is far higher than that of the lower region.
氩气的分布不均匀，上回流区钢液的含气率大大高于下回流区。
Based on jet theory, four different regions of liquid steel flow within the crystallizer have been found and the physical model of the flow for every region has been conducted.
采用射流理论，得出结晶器内钢液流动的四个不同区域，分别求得其钢液流动的物理模型。
Conclusion Neonatal liquid nitrogen injury could result in mossy fiber sprouting in hippocampal CA3 region and microgyrus.
结论幼鼠早期液氦损伤可导致小脑回形成及海马CA3区苔藓纤维发芽。
Methods The amount of soft-tissue defect was estimated by the volume of the injected local anaesthetic liquid. Many tubes were formed subcutaneously in the region to be augmented.
方法：采用自体脂肪颗粒移植矫正额颞部凹陷，通过注射麻醉液预先估计填充量，受区皮下预处理形成颞浅筋膜浅层和深层两个平面及多个隧道。
The observed parameters of the experiments are the mixing time and the angle of gas-liquid phase region.
实验考察指标为混匀时间和气液两相区夹角。
The utility model with high sensitivity to external magnetic field, high coupling performance, and self-outfit of a shielding barrel can be operated in the liquid nitrogen temperature region.
这种干涉器可在液氮温区工作，对外磁场灵敏度高，耦合性好，又可自身配备屏蔽筒。
The utility model with high sensitivity to external magnetic field, high coupling performance, and self-outfit of a shielding barrel can be operated in the liquid nitrogen temperature region.
这种干涉器可在液氮温区工作，对外磁场灵敏度高，耦合性好，又可自身配备屏蔽筒。
应用推荐