An expanded liquid model (ELM) for solid solute solubility in supercritical fluids was proposed based on the assumption that the supercritical fluid was considered as an expanded liquid.
将超临界流体视为膨胀液体，根据溶液理论，建立了计算溶质在超临界流体中溶解度的膨胀液体模型。
Well, in this simple model the entropy of the pure liquid is zero.
在这个简单的模型中，这个纯液体的熵是零。
And again, the reason this simple model works is because although a real liquid, certainly a pure liquid has a finite entropy, a substantial amount of disorder, that's present, that kind of disorder.
并且又一次，这个简单的模型，起作用的原因是，虽然真正的液体，当然纯液体有有限的熵，存在大量的无序状态，这种无序。
And in general, if we're going to deal with relatively small deviations from the ideal liquid mixture, the ideal solution, then we can start with a model like this.
通常，如果我们要，处理的相对于，理想液体混合物，理想溶液相差不多，那么我们可以从这样的模型开始。
In the first model, a group of mice were put in a cage with levers that dispensed food. When the mouse pushed a lever, a liquid treat — either a starchy or a sweet liquid — came out.
第一组试验中，一群老鼠被置于一个装有能提供食物的操纵杆的笼子里，当老鼠推动操纵杆的时候，一滴液体食物(含有淀粉或糖的液体)就会掉出来。
Dr Fauve's model of the Earth's core was a cylindrical tank some 50cm long filled with liquid sodium.
Fauve博士的地心模型是一个50厘米长的圆柱形容器，里面装有液态钠。
Their working model is a shoebox-sized package of electronics and liquid-filled tubes, with a silicon chip at its core.
他们的工作模型是一个鞋盒大小的电子盒和一个填满液体的管道，这个模型的核心是一块硅片。
Based on their findings, the researchers were able to construct a model for how carbon dioxide moves from liquid to gas.
基于这一发现，研究人员就能建立一个模型以模拟二氧化碳从液体转化为气体的过程。
A model have been done and experiments on some sorts of liquid cylinder have been made.
制作了一个模型并对几种不同的液柱进行了实验。
Conclusion the mouse model of alcohol liver injury was successfully established by complex alcohol liquid food and LPS, and the alcohol extract of Schisandra can reduce alcohol liver injury.
结论酒精联合LPS建立了小鼠酒精性肝损伤模型，适用于酒精性肝损伤防治药物的研究；五味子酒精提取物具有降低酒精性肝损伤作用。
Firstly, the static and dynamic mathematic model of the Liquid Propellant Rocket Engine of pressure-fed providing system was established in centralized parameter method.
首先采用集中参数法，建立了挤压式供应系统的液体火箭发动机各部件的静态及动态数学模型。
The comparison of the results of the calculations and the experiments indicates that the model can reflect the true liquid flow on CTST well.
通过与实验结果的对比，结果表明该模型较好地反映了CTST塔板上液体流动的真实情况。
Deep study is done for the design model and standards of liquid distributor in large - sized packing tower. Related achievements are applied in practical project design.
对大型填料塔液体分布器的设计模型及设计标准进行了深入的研究，并将成果应用于实际工程设计中。
This paper discusses helix model of rotation mechanism of the liquid and solution.
论述了液体和溶液旋光机理的螺旋模型。
Beside fractional crystallization model, liquid immiscibility of Fluorine-rich granite magma is an important mechanism to form pegmatite and pegmatite type deposit.
除了结晶分异模式外，富氟花岗岩浆液态不混溶作用也是伟晶岩成岩成矿的重要机制。
Based on the method of statistical thermodynamics of solutions, a statistical thermodynamic model of liquid mixtures is given.
应用溶液统计热力学方法和溶液理论，建立了多元液体混合物的统计热力学模型。
The test results could be explained by the spring and dashpot model used in liquid crystal structure.
对于液晶实验结果采用弹簧-粘壶模型进行解释和讨论。
An improved model for liquid membrane mass transfer has been developed.
本文提出了一种改进的关于液膜传质的数学模型。
This paper studied liquid steel flow property in mould of super low head slab CC with hydraulic model and mathematics model.
本文应用水力学及数学模型的方法研究了超低头板坯连铸结晶器内钢水流动特征。
Using the equivalent mechanical model, this paper investigated multi-tank liquid sloshing problem.
用等效力学模型法研究了多腔体充液晃动问题。
A model for liquid drainage was developed based on average velocity to get the macroporosity distribution of aluminum foam in liquid state.
为得到液态泡沫铝的宏观孔隙率分布，提出基于平均速度的泡沫析液模型。
For pouring cup iron level control system, three segment controls are adopted according to three mathematics model of the ideal liquid curve in pouring cup.
对于浇口杯液位实时控制系统，根据浇注过程中浇口杯理想液位曲线的三段数学模型采用分段控制的方法。
Based on analysis of heat transfer in the process of liquid evaporation in details, an evaporation model was developed and the calculation method was also provided.
在对液体蒸发过程中的热量传递进行详细分析的基础上，推导建立了液体蒸发计算模型，并给出了求解方法。
With the selection of a gas liquid computational model to calculate bottom hole pressure and compare with observed pressure, its relative error is less than 2%.
选用气液两相计算模型计算井底压力并和实测井底压力进行了对比分析，相对误差均小于2 %；
Using the model, the liquid holding efficiency and pressure drop of gas lifting flow with liquid flow rate being zero was calculated.
提出了零液流量气提流动的两相流水动力学模型，应用该模型计算了零液流量气提流动的持液率和压力降。
A model of mass transfer coefficients in liquid phase near free gas-liquid interface is developed based on the energy spectrum functions of isotropic turbulence.
摘要在单涡模型的基础上，根据各向同性湍流的能谱函数，考虑不同尺度的旋涡对气液传质的影响，建立了气液自由界面传质系数模型。
The convection in molten liquid can be much more weakened by buoyancy convection increasing the flow of liquid encapsulation in this model.
在本文模型中，浮力对流促进了液封层的流动，从而加大了对熔体热毛细对流的抑制作用。
One-dimensional homogeneous model based on the gas-liquid two-phase flow theory was established.
基于气液两相流理论，建立了垂直上升管内液氮气液两相流动的一维均相流模型；
The liquid water transport model for cathode was also developed.
建立了阴极液态水传输模型。
The liquid water transport model for cathode was also developed.
建立了阴极液态水传输模型。
应用推荐