The liquid flow system of a stope is a key for stope leaching.
采场液流系统的研究是就地浸出的关键技术之一。
The stability and accuracy of the output pressure of the double liquid path in the liquid flow system are especially important for the function of the flow cytometer.
液流系统两条主液路输出压力的平稳性、准确性是流式细胞仪功能实现的基础。
Discharge valve can be will collect the liquid and solid particle emissions, prevent the liquid flow off the downstream, the pollution downstream compressed air system.
排放阀可以将收集的液体和固体微粒排放掉，防止液体流向下游端，污染下游端的压缩空气系统。
When the viscosity of the liquid delivery higher, or when the system work in a cold environment, we must ensure that the transmission medium can flow smoothly.
当输送液体的粘度较高，或当系统在寒冷环境工作时，必须确保输送介质能够顺畅地流动。
Visualization study of two-phase flow in anode interdigital flow bed of a liquid-fed direct methanol fuel cell (DMFC) was performed in a home-made experimental system.
采用自制的实验系统对液态进料直接甲醇燃料电池（DMFC）阳极交叉指状流道内的两相流动特性进行了可视化实验研究。
A theoretical calculation and experimental study is conducted of a supersonic steam liquid two phase flow pressure boosting unit, which incorporates a hot water recirculation system.
介绍了具有再循环系统的超音速汽液两相流升压装置，并对该装置的各种性能进行了理论计算及实验研究。
This method is applied in the pump liquid control system by hydraulic coupling, the experimental results is satisfactory when the flow disturbance varies far.
该方法应用于渣浆泵调速型液力耦合器调速液位控制系统，在干扰流量变化很大的情况下，均获得了满意的控制效果。
The pneumatic-hydraulic composite transmission system with two-step output liquid pressure automatic switchover from low pressure and mass flow to high pressure and little flow.
具有双级液体压力输出的气—液复合传动系统，能实现低压大流量到高压小流量的自动切换。
A new type of indirect flow control method shows that liquid flow can be controlled with a mass flow controller on the squeeze air system.
介绍了一种新型的调压式流量控制方法，即通过气路安装质量流量控制器的方法对液路流量进行控制。
Liquid system is the need for oil pressure, flow, direction control and regulation to meet the needs of working parts in the power, speed and direction requirements.
液正系统工作，必须对油液压力、流量、方向进行控制与调节，以满足工作部件在力、速度和方向上的要求。
Based on the potential flow theory of liquid and vibration equation of cantilever beam, the free vibration problem of cantilever beam liquid cantilever beam coupled system is analyzed in this paper.
应用流体的势流理论及悬臂梁振动方程，本文分析了悬臂梁流体悬臂梁耦联系统的自由振动问题。
In these applications, it is very crucial to predict the flow boiling heat transfer coefficient of liquid nitrogen for the system design and safe operation.
在这些应用中，准确预测液氮的流动沸腾换热特性对于系统设计和安全运行十分重要。
The on-line cascade dilution system was designed with flow power from liquid weight. The dilution rate can reach to 1010.54 times.
运用流体自身重力克服流动阻力，设计在线级联稀释系统，稀释比可以达到1010.54倍；
Vortex and Pulsed Reaction Equipment (VPRE) was presented. The flow pattern and characteristics for gas-liquid or gas-liquid-solid system in VPRE were analyzed.
设计了一种涡旋脉冲式反应装置，分析了气-液或气-液-固多相体系在涡旋脉冲式反应装置中的流动状态及特点。
The flow control is carried out by the method combining single neural cell and expert system, and liquid location is controlled by intelligent PI with integration separation method.
该系统采用单神经元和专家系统相结合的智能PI调节方法实现流量控制，液位采用积分分离智能PI调节方法。
The experimental research on the dispersal process of the axisymmetric liquid rings had been performed with the system, and a series of photographs for the flow field were obtained.
轴对称液体环抛撒过程的实验研究已在这种实验设备上完成，并得到了相应的一系列流场照片。
The system is suitable for the control and measurement of flow of noncorrosive liquid in the pipe.
本装置适用于管道中无腐蚀性液体的测量和控制。
A new liquid hydrogen loading system is introduced. In order to prevent two-phase flow, an important improvement of the original loading system was made.
简要介绍了新型液氢加注系统，为防止两相流，对原系统做了重大改进。
The liquid flow meter developed by TRICM is in fact a closed loop measurement system.
我们所研制的这种测试仪，实际是一种闭环测试系统。
In this paper, a CCD measuring system and techniques of image dealing are used to carry out a visual investigation on a vapor-liquid-solid three-phase natural circulating flow boiling system.
本文采用CCD测量和图像处理技术对汽液固三相自然循环流动沸腾系统进行了可视化研究。
The train of thought for instrument design selection in ammonia synthesis, alcohol hydrocarbonization system was discussed from aspects of temperature, pressure, liquid level, flow quantity etc.
从温度、压力、液位、流量等方面论述了氨合成、醇烃化系统仪表设计选型的思路；
Modifications of the flow scheme of recovery system for improving the distribution of gas and liquid loads are suggested.
还提出了对老流程的修改调整方案，以改善回收塔内的气、液相负荷分布。
Fluid Energy Controls surge Stop surge Suppressors are designed to dampen the pressure surges caused by rapid closing and opening of flow control valves in any liquid handling system.
浪涌电压抑制器用以抑制关闭和开启控制阀时产生的压力波动。
The T-junction channel used for the electromagnetic transfer system was designed, then liquid metal flows from the channel to the shot sleeve was simulated with software FLOW-3D.
运用FLOW - 3d软件对液态金属在T形管道中流动并传输至压室的过程进行了数值模拟。
The tube cleaning equipments are compatible with compressor burning system cleaning and hold the functions of cleaning refrigerant recovery, refrigerant purify, gas-liquid two-phase flow, etc.
用于空调系统清洗的机型具有：制冷剂回收、制冷剂净化、制冷剂气液二相流清洗等功能，适合对压缩机烧毁系统的清洗。
Unsteady flow and concentration fields in the liquid phase of a gas-liquid contacting system were simulated to show the natural convection by utilizing the finite-element CFD method.
并通过吸收传质流体CFD模型，应用有限元方法对气液吸收过程中出现的自然对流发生过程进行了数值计算，得到了液相自然对流发生时的非稳态流场分布和浓度分布信息。
Unsteady flow and concentration fields in the liquid phase of a gas-liquid contacting system were simulated to show the natural convection by utilizing the finite-element CFD method.
并通过吸收传质流体CFD模型，应用有限元方法对气液吸收过程中出现的自然对流发生过程进行了数值计算，得到了液相自然对流发生时的非稳态流场分布和浓度分布信息。
应用推荐