But the steel temperature only effects on liquid core length.
较大；钢液浇注温度仅对液芯长度有较大影响。
The organic fiber with liquid core is manufactured successfully.
研制出了液态有机光纤。
So he concluded that the depth marker the boundary between the solid metal and the liquid core.
所提你提出这个深度是固体金属和液态核的边界。
While liquid core fiber has fewer varieties, it has found wide uses, especially in the field of UV curing.
虽然液芯光纤的品种较少，但用途比较广，特别是在紫外光固化行业中得到大量应用。
There are two core techniques in thin slab CC:one is curved mold and the other one is liquid core reduction.
薄板坯连铸有两个主要核心技术：一个是曲面的结晶器，一个是液芯压下技术。
Dwyer and colleagues say the Moon's magnetic field was generated because its liquid core once rotated differently to its overlaying solid mantle.
Dwyer和他的同事认为，月球磁场是因为它的液体磁芯曾经与它堆叠的坚固地幔旋转不同而产生的。
The method of self diagnosis and self repair for composite structure using shape memory alloy and adhesive liquid core optical fibers was studied.
研究了利用形状记忆合金和液芯光纤对复合材料结构中的损伤进行自诊断、自修复的方法。
And the researchers say that the rediscovered Russian reflector is particularly useful for studying the moon's liquid core and testing ideas about gravity.
研究者们还表示重新找到的俄国反射器对于研究月球液核并测试有关重力的猜想大有裨益。
Each of these impact events would also have significantly affected the rotational state of the Moon, causing the solid mantle and liquid core to rotate differently.
每次撞击都会对月球的转动状态产生重大的影响，并引起坚固的地幔和液体磁芯间的转速差异。
Liquid core optical fiber long light path absorption system consists of the light gathering system and liquid core optical fiber long light path absorbing tube.
液芯光纤长光路系统主要由聚光系统和液芯光纤长光路吸收管组成。
In continuous casting course, the liquid core length is a very important parameter, it reflects the cooling condition of casting and the appropriate degree of pulling speed.
在连铸生产工艺中，连铸坯的液芯长度是连铸生产中一个非常重要的参数，它直接反映了铸坯冷却的状况和拉速的合理程度。
As a new kind of optical fiber, liquid core fiber is also called liquid-core light-conducting tube. It has superior optical properties as compared with conventional optical fibers.
液芯光纤也叫液芯光导管，是一种全新的光纤品种，与传统的光纤相比，有着优异的光学性能。
Scientists carrying out extreme boffinry into the makeup of the Earth's liquid core have announced that they are very puzzled to find it is not made of what they had thought it was.
科学家们采取了非常极端的科研的方式对待地球液体核心的构成，并且声称他们非常困惑的发现，它的构成不是象当初他们所想的那样。
During the process of rolling ingot with a liquid core the effect of the liquid core ratio on different factors of metal deformation has been investigated by a simulation experiment.
通过模拟试验，研究了液芯轧制过程液芯率对金属形变各个因素的影响。
The three dimensional flow of metals during rolling of ingot with liquid core has been studied in the article. Here the influence of liquid core ratio on rolling was studied in particular.
本文研究了液芯轧制时三维空间中金属流动，着重地研究了液芯率对轧制的影响。
The present paper briefly introduces the liquid core reduction process during thin slab continuously casting and compares the technique of liquid core reduction with that of soft reduction.
介绍了薄板坯连铸过程中的液芯压下工艺，对比了液芯压下与软压下的区别。
The Dark Twin does not have a liquid core, but at one time did have this, as all planets coalescing from a Big Bang are first gaseous, then liquid, and then finally solidifying as they cool down.
黑暗孪星没有液态核心，但曾有一段时间它的确也有液核，因为所有行星是从宇宙大爆炸的气体凝聚，然后液化，最终降温固化而成的。
Hence, when the slab is subjected to the liquid core pre-rolling, it will be possible to obtain a refinement of the internal structure by reducing the central porosity as well as the segregation.
因此，当板坯经历液芯预轧制的时候，将可能会通过减少中心多孔性和分离来获得内部结构的精制。
The guidance roller supports the dummy bar when the casting process is just started. It also supports the soild state billet with liquid core and guides the billet direction in the casting process.
导向辊 的作用是对带液心的铸坯起支撑作用和导向作用，同时也是在开浇时对引锭杆进行支撑和导向。
The Cu Pb clad samples were used to simulate the strands with liquid core and the deformation characteristics of the sample in the rolling process were investigated by visio plasticity (mesh) method.
用视塑性(网格)方法研究了铜复铅芯模拟样品轧制时的变形行为，与无铅芯的样品进行了比较，由此了解带液芯连铸坯轻压下时的变形特征。
The effects of superheat on the shell's thickness leaving mold, the surface temperature of casting blank, the shell's thickness in casting solidification and the length of liquid core were simulated.
进行了过热度对出结晶器坯壳厚度、方坯表面温度、铸坯凝固过程中坯壳厚度和液相穴的影响的模拟分析研究。
The simulation results show that mushy region is compressed and interdendritic solute-rich liquid flows toward the liquid core in the soft reduction action zone at the solidification end of the slab.
在铸坯凝固末端轻压下直接作用区域，两相区受到压缩，枝晶间富含溶质的液相被挤出，相对于铸坯向液芯方向流动。轻压下之后，铸坯中心区域由糊状区内被压缩的固相及残留的液相构成，中心区域偏析指数下降。
All are slowly moving because the plates float on a denser semi-liquid mantle, the layer between the crust and Earth's core.
所有板块都在缓慢移动，因为它们漂浮在密度更大的半液态地幔上，也就是地壳和地核之间的那一层。
This could mean there are strange, lopsided internal dynamics occurring in the churning liquid metal in the core.
这可能意味着在核心内液态金属的搅动下有一些奇怪的、不平衡的动力出现。
Anyway, let's start at some of the less severe (though still unsettling) things that can happen when the coolant liquid is no longer present in the core.
总之，如果堆芯中的冷却剂已经不复存在，那么让我们先从一些不太严重(也仍然没有得到解决)的可能情况开始谈起。
Dr Fauve's model of the Earth's core was a cylindrical tank some 50cm long filled with liquid sodium.
Fauve博士的地心模型是一个50厘米长的圆柱形容器，里面装有液态钠。
Their working model is a shoebox-sized package of electronics and liquid-filled tubes, with a silicon chip at its core.
他们的工作模型是一个鞋盒大小的电子盒和一个填满液体的管道，这个模型的核心是一块硅片。
Objective: To study the relation of the laser quantum irradiated oxygenated liquid therapy (LQL) and the efficacy of oxygenated general core in vitro.
目的：研究体外激光量子辐射充氧液体疗法(LQL)与常用氧载体的载氧能力的关系。
Objective: To study the relation of the laser quantum irradiated oxygenated liquid therapy (LQL) and the efficacy of oxygenated general core in vitro.
目的：研究体外激光量子辐射充氧液体疗法(LQL)与常用氧载体的载氧能力的关系。
应用推荐