Find all triangles that intersect each other in 3d space, and split them using line of intersection.
找到所有的三角形相交于三维空间中彼此分离，并使用交叉线。
The line of intersection can be made with a general method when the cylinder and frustum of a cone are normal to each other.
当圆柱与圆台正交时，其相贯线可用一般方法作出，但其正面投影和水平投影上相贯线的最右点不能准确定位。
The line of intersection, inward concave and shallow area of curved surface are the difficult points in curved surface machining.
曲面交线、曲面内凹区域及曲面中浅平面的加工是曲面加工中的难点。
The projecting lines are discussed by using the line of intersection in horizontal ( H ) plane, profile ( W ) plane and frontal ( V ) plane.
并讨论相贯线在水平（H）面，侧立（W）面，正立（V）面上的投影线。
With the ordinary camber used as auxiliary cross section, the line of intersection of two biasing single cambers is worked out in a view with the method for line of nodes.
本文以一般位置平面为辅助截平面，用求迹线方法，在一个视图求作两单曲面偏交交线。
In the following sample output, the cell at the intersection of Product line "Personal Accessories" and Retailer region "Americas", for example, shows Revenue of 465,140,601.
在下面的样例输出中，Productline“PersonalAccessories”和Retailerregion“Americas”交叉处的单元显示的Revenue为465,140,601。
Your position distance 400metres from intersection of reference line.
你船的位置距参照线交点400米。
Draw the projection of the intersection line.
在相交处应画出交线的投影。
The coordinate transformation method to handle displacement continuation problem on the intersection line of curved surfaces in the curved shell finite element method is presented.
提出了在曲壳有限元法中用坐标转换法处理曲面交线处结点位移的连续性问题。
The trace occurrence is substantially the occurrence of intersection line of two oblique planes in space, which belongs to the mathematics field of solid geometry.
迹线的产状实质上是空间二斜面相交线的产状，属于立体几何学等数学范畴。
The projection of the special points on the intersection line of cylinder with oblique cylinder , of cone with half sphere and of oblique cylinder with cone are determined with the analytic method.
本文用解析法确定圆柱与斜圆柱、圆锥与半球及斜圆柱与圆锥的交线上特殊点的投影。
Three approaches to the graphic representation for lines of intersection are introduced in this article, namely, central projection, parallel skew projection and arc line projection.
本文介绍了图解截交线的三种方法，中心投射法、平行斜投射法、弧线投射法。
The intersection visibility rule of a line and general plane was concluded and a new judge method on intersection visibility of two general place planes was also put forward in this paper.
同时，阐述两平面相交交线的空间位置情况，从而得出两平面相交可见性判断的新方法。
This paper discusses a method of finding intersection line of fault and coal seam with analytic method on the conditions of same dip of fault and coal seam , and presents the application examples.
探讨了断层与煤层倾向相同条件下断煤交线的解析求法，并举出应用实例。
The point of intersection of elastic line and plastic line moves toward the low cycle life with the hardness of the spring steel raised after tempering from the strain fatigue curve.
在应变疲劳曲线上，弹性线和塑性线的交点随弹簧钢回火后硬度的升高而向低循环寿命移动；
The concept of traversing line is presented to deal with the intersection curves of offset surfaces with planes...
提出贯穿线的概念，对截面上包含自交、重叠、干涉的无序交线进行规整处理，生成有序的无干涉刀轨。
The math model about synchronism controlling between line scanning rate of CCD and object moving speed in the TDI CCD intersection measuring system is established.
建立了TDICCD交汇测量系统中CCD行扫描速率和目标运动速率同步控制的数学模型。
Refers to the suture line, the provincial line, fold line and so on the intersection of a short line, in order to imply that the suture is connected, as a mark of line alignment.
指与缝合线、省线、褶线等相交的一条短线，以暗示缝线相连，作为线条对位时用的记号。
The miter length is the distance from the intersection of the line walls on the inside of the join to the intersection of the line walls outside of the join.
斜接长度是指线壁在联接内部的交点与线壁在联接外部的交点之间的距离。
This paper expounds the use of an auxiliary plane in seeking the point of intersection between a straight line and a plane, using a comparative analytical method.
采用对比法对辅助平面在求一般位置的线面交点中的作用进行了论述。
Taking a typical intersection as an example, the crossing-capacity model of this typical intersection is established by using the stopping line method.
选取城市中最典型的十字形交叉口为对象，结合通行能力的停车线计算法，建立了典型十字形交叉口的通行能力模型。
Now the general method simplifies the shaft to the line segment, then calculates the distance between two line segments or the position of the point of intersection.
一般的研究方法都是把杆状物体简化为空间线段来进行分析和计算他们之间的距离或者具体的交点位置。
Crosswalk as mentioned herein shall mean the planar intersection directly linking up with the road, with the width of its paved area on the railway line less than 2.5 meters.
所称人行过道，是指铁路线路上铺面宽度在2.5米以下，直接与道路贯通的平面交叉。
An isometric mesh on the concave of a spherical substrate was formed by latitude line intersection each other, in which latitude lines was generated by a concentric optical scanning method.
摘要纬线与纬线相交可形成球面等距网栅，而采用“同心扫描”的运动方式可在凹球面上生成纬线。
This paper proposed a new method to find the intersection line and determine its visibility of two general position planes using overlapped projection lines.
提出用重影线法求解两一般位置平面相交求交线判别可见性的新方法。
The intersection of sweep volume with complicated surface normal is transformed into computation of intersection between triangular mesh and directed line segment.
将扫描体与复杂曲面法矢的求交问题，转化为三角网格与有向线段之间的求交计算。
A new method was put forward to find the intersection line and determine its visibility of general position lines and planes using overlapped projection lines.
提出用重影线法判断两重影直线的相对位置和求解一般位置直线与平面相交求交点判别可见性的新方法。
Our study established a method called "Local space transform", can simplify the procession of intersection between line segments, improve the efficiency and decrease the complicacy.
针对上述情况，提出了通过局部空间变换的方法，简化直线段之间的求交过程，且在一定程度上可降低算法的复杂度，提高算法的效率。
Auxiliary surface is commonly used as a graphic solution for the projections of the intersection line of quadratic cambers of revolution.
在两个二次回转曲面体相贯线的求解中，辅助面法是常用的图解方法。
Auxiliary surface is commonly used as a graphic solution for the projections of the intersection line of quadratic cambers of revolution.
在两个二次回转曲面体相贯线的求解中，辅助面法是常用的图解方法。
应用推荐