A research is made of the limit analysis of stability calculation of reinforced embankment to perfect the design method of limit analysis of reinforced embankment.
为了完善加筋土路堤稳定的极限分析设计方法，对加筋土路堤稳定的极限分析计算方法进行研究。
So studying reliability of rainwater pipe network and adopting probability limit state design method based on reliability theory to design rainwater pipe network have important actual meanings.
因此，研究雨水管网的可靠性，采取基于可靠性理论的概率极限状态设计法来设计雨水管网有着重要的实际意义。
The suggested method may be used in the limit design of reinforced concrete slabs.
本文提出的方法可适用于钢筋混凝土板的极限设计。
At present, the rigid-body limit equilibrium method adopted in the design of crane beam on rock wall can not reflect the actual mechanical behavior of crane.
目前，岩壁吊车梁设计所采用的刚体极限平衡设计方法还不能确切反映岩锚吊车梁的实际受力状态。
Based on the demands of two limit states, the design control equations of cross section for prestressed concrete beam are derived and the direct design method is presented.
根据两类极限状态的基本要求，建立了预应力混凝土梁截面设计的控制方程，提出了直接设计方法。
A proposed method is presented to design lead shear dampers according to the limit damping forces and yield displacements.
以极限阻尼力和屈服位移为参数，给出了阻尼器的设计方法。
The method has considered the effect of difference in material hardness on the fatigue limit, which causes the shaft diameter design to become different depending on heat treatment difference.
该方法考虑了材料硬度对疲劳极限的影响，使半轴杆径设计随热处理方法不同而有所差异。
In this thesis, the FEM stress analysis and strength design criteria, multi-axes strength theory and computation, limit load analysis method of arch DAMS are concerned.
本文结合工程实际，在拱坝有限元应力分析方法与强度设计准则、多轴应力强度安全计算、拱坝极限荷载分析理论和方法等方面开展研究。
It is also proved theoretically that the deduced method for fillet weld connections meets the requirements of the probabilistic limit states design procedures.
从理论上证明角焊缝连接的折算方法满足概率极限状态设计的要求。
It is also proved theoretically that the deduced method for fillet weld connections meets the requirement of the probabilistic limit state design procedures.
从理论上证明角焊缝连接的折算方法满足概率极限状态设计要求。
The authors put forward a design method of Partially Prestressed Concrete members, Which is based on the direct Controlling of two Kind of limit state and also the design formula and design steps.
本文提出了部分预应力砼构件基于两类极限状态直接控制的设计方法，并给出了具体的设计公式和设计步骤。
Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
由于再加热炉出料方式设计上的原因，限制了PQF轧机生产线的轧制节奏，从而影响产量。
In this experiment, the different total salt level, different grain gradation artificial sample were compounded by use of the mixture of average design method to determine earth consistency limit.
按混料均匀设计方法配制不同总盐水平、不同颗粒级配的人工土样，通过界限含水率试验测定土的稠度界限。
This model is based on the limit state design philosophy. This paper adopts the chance constraint programming method and changes the model into an equal deterministic nonlinear design problem.
该模型以极限状态设计方法为基础，采用机遇约束规划方法变换为一个等价确定性非线性规划问题。
Most of recent domestic design codes of engineering structures have adopted the Probability-Based Limit State design Method.
当前的工程结构设计，在国内的结构设计规范中，多已采用以概率理论为基础的极限状态设计法。
This paper illustrates the economical merit of the limit state design method that could be won in a railway and highway bridge.
本文提出以极限状态的观点进行公铁两用桥设计，会收到良好的经济效果。
With these as functional requisitions, the limit-state design method for tracks is proposed on the basis of probability theory.
并以此为功能要求，提出了以概率理论为基础的轨道极限状态设计方法。
The results indicate that it is conservative to design CFST arch Bridges by using allowable stress method in steel tube, and that it is reasonable to use limit state method.
数例表明，目前广泛应用钢管应力控制CFST的设计过于保守，文中方法似更合理。
Based on limit-state design method in steel structure design principle, the principle and method of phased strengthening design of steel structures strengthened by prestressing is represented here.
以钢结构设计原理中的极限状态设计法或容许应力法为基础，阐述了预应力加固钢结构的分阶段加固设计计算原理和方法。
In this paper the finite element method is combined with optimization. The strengthening optimization is put forward on the basis of the limit analyse method of pressure vessel strengthening design.
将有限元应力分析方法与优化设计方法相结合，提出了基于受压容器开口补强的极限分析理论和优化设计思想。
The probabilistic design conception on limit state was introduced, and the theory using the JC method to compute the cascade reservoir's design flood was studied.
引入概率的极限状态设计概念，研究JC法推求梯级水库设计洪水的理论。
The reliability-based limit-state design method has been showed to be a development tendency in oil & gas pipeline engineering. It is adopted by international advanced pipeline standards.
基于可靠性的极限状态设计方法是油气管道工程设计的发展趋势，已为国际上先进的管道工业标准所采用。
In this paper, a decomposable method of re limit is presented, and practical application of this method is analyzed. The same time design points of re also be given in th...
本文就此介绍了一种电磁兼容中辐射发射项目的分解方法，对其实用性进行了分析，同时给出其控制辐射发射指标的设计要点。
The assemble criterion of sensor for design was advanced. At last, a method of increasing signal-to-noise ratio and reducing flux lower limit value of vortex flowmeter was advanced.
椐此提出通过双钝体诱发卡门涡街增强涡街强度、提高涡街流量计的信噪比，进而降低涡街流量计的流量下限的方法。
The assemble criterion of sensor for design was advanced. At last, a method of increasing signal-to-noise ratio and reducing flux lower limit value of vortex flowmeter was advanced.
椐此提出通过双钝体诱发卡门涡街增强涡街强度、提高涡街流量计的信噪比，进而降低涡街流量计的流量下限的方法。
应用推荐