However, "Wabu" fake tickets being Wabu the face in the process, there will always be scrape off part of the paper fibers, so a bit pale in the light of all the "true colors.
不过，“挖补”假票的票面在被挖补的过程中，总会被刮去一部分纸纤维，因此，在光照下都会略显发白而“原形毕露”。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
The paper simulates the whole process of one light hydrocarbon recovery pant and gives out the main simulation process and simulation results.
对某轻烃回收装置进行了全流程模拟计算，给出了模拟计算的主要过程及模拟的全部结果。
In this paper, the causes of errors in measuring well depths are analyzed in light of the practical process and some Suggestions are made on how to eliminate errors.
通过对产生误差的过程分析，结合实践找出误差产生的原因，并对如何消除误差提出了一些建议。
This paper introduces a kind of calculation process of the solar energy light volt generating electricity system (called PV system), Providing to consult only.
本文介绍一种户用太阳能光伏发电系统(又称PV系统)的计算流程，仅供参考。
In this paper, a study of light alkane of oil field as raw materials, production process of light alkane aromatization catalysis BTX aromatics was discussed.
本文主要研究了以油田低碳烷烃为原料，通过低碳烷烃芳构化催化反应生产芳烃btx的工艺过程。
This paper introduces some problems existing in the process of railway signal cable construction, and in the light of these problems, advances some corresponding improving methods.
主要介绍了铁路信号电缆施工过程中存在的一些问题，并针对这些问题提出了相应的改进办法。
In the light of the construction practice of Zhengpu bridge in Qingpu District, Shanghai the paper introduces the process of construction without supports of reinforced concrete tied arch bridge.
本文结合上海市青浦区蒸浦大桥施工实践，简要介绍了钢筋混凝土系杆拱桥无支架施工的工艺。
The paper introduces the design process of optical fiber composite ground wires (OPGW) in the light of structure type selection, heat stability, mechanics calculation and the kit fittings.
介绍了OPGW光纤复合架空地线的设计过程，并从OPGW的结构选型、热稳定、力学计算以及配套金具等几个方面进行了阐述。
This paper introduces the principle of design and process of form about intelligent light-adjusted system for new model general surgery microscope.
本文介绍新一代全数字式通用显微手术设备中的智能调光系统的设计制作原理与构成。
This paper explores and clarifies ambiguous and erroneous ideas on structural entity testing of concrete structure in the process of project construction in light of relevant regulations.
针对建筑工程施工中对混凝土结构“结构实体检验”存在的模糊或错误认识，结合规范进行剖析，予以澄清。
This paper investigates an optical reorientation process of azo dye doped liquid crystals and explains the dependence of the enhancement factor on the incident light direction.
研究了发生在偶氮染料掺杂液晶中的光诱导重新取向问题，并解释增强因子与光入射方向存在依赖关系的物理机制。
This paper further simplifies the process of light propagation without losing the authenticity. We mainly USES the multiple forward scattering and single scattering to render the light.
在本文的研究过程中，在不失真实性的前提下，将其进一步简化，采用前向为主的多重散射和单向散射相结合的方法进行光线的渲染。
This paper also covers the main process of binocular 3D laser scanner, which uses laser dots array as initiative light, stereo matching, 3D reconstruction and local registration.
对用激光点阵作为主动光的双目3D扫描仪软件实现的主要过程进行了描述，并对立体匹配，三维重建和局部配准进行了比较详细的阐述。
This paper discussed on the reasons for the differences of experimental design and practical application and the problems and solutions of Light Guide Plates in the process of processing.
探讨了实验设计与实际应用出现差别的原因以及导光板加工过程中出现的问题、解决方案。
In the study of facility layout, the paper designs the improvement of operations process for BGI lighting louver light workshop.
本文从工艺流程改进的角度研究设施与布局，对百家丽照明电器格栅车间进行改善设计。
This paper introduced the calibration of digital light scattering dust test instrument and mentioned some key points in measurement process.
文中介绍了光散射式数字粉尘测试仪各项指标的具体标定方法，并结合实际应用，总结了使用过程中应注意的事项。
The influences of white light LED packaging process on its performance are discussed in this paper.
研究了在蓝光芯片加黄色荧光粉制备白光LED方法中，色坐标位置对光通量的影响。
The paper compares the laser light strip geometric center extraction process method and the skeleton method, and adopts the skeleton method whose thinning precision is much higher.
本文通过对比激光几何中心提取法及骨架法，使用了细化精度更好的骨架法。
The paper compares the laser light strip geometric center extraction process method and the skeleton method, and adopts the skeleton method whose thinning precision is much higher.
本文通过对比激光几何中心提取法及骨架法，使用了细化精度更好的骨架法。
应用推荐