Because banks will do the heavy lifting, the credit pump can be reprimed swiftly.
由于银行将挑起重担，信贷的供给可望迅速地重新准备好。
Pump into the water or in the lifting, there shall be no pulling cable, so as not to damage or disconnect joint.
电泵在潜入水中或吊起时，不得拉动电缆，以免电缆损坏或接头处断开。
Pump into the water or lifting at the time not pulling the cable to avoid cable damage or disconnect joint.
电泵在潜入水中或吊起时，不得拉动电缆，以免电缆损坏或接头处断开。
The top end bracket shall be fitted with a stainless steel lifting bail and shall be capable of supporting the combined weight of the pump and motor.
顶部尾轴承架应该配置不锈钢吊环，应该能够支撑泵和电机的总重量的压力。
The top end bracket shall be fitted with a lifting bail and shall be capable of supporting four (4) times the combined weight of the pump and motor.
顶部尾轴承架应该配置吊环，应该能够支撑泵和电机的总重量四(4)倍的压力。
Comparison between the oilwell jet pump and other artificial lifting equipment shows that the jet pump is more suitable for oil recovery from complicated Wells.
将采油喷射泵与其他人工举升采油设备进行的分析对比表明，喷射泵更适用于复杂油井的开采。
And it is formed by maintain cabin, lifting cylinder, ejection system, pump system, and sealing device.
主要由维修工作舱、升降油缸、喷冲、抽吸系统和密封装置几部分组成。
Both lifting design method and quasi-three-dimensional design method has been applied to the design of axial flow pump impeller.
本文分别采用升力法和准三维的方法对轴流泵叶轮进行了设计计算和性能预估。
Due to power failure suddenly, the lifting system of sand pump in alluvial gold mine is frequently blocked up.
砂金矿山所用砂泵提升装置因突然停电而堵塞提升系统。
Zhongyuan new type energy-saving submersible motors are developed for solving such problems as large energy consumption and high lifting costs during the production of the electric pump Wells.
为解决电潜泵井生产过程中能耗大、采油成本高等问题，研制出新型节能潜油电动机。
In the light of the problems with artificial lifting by screw pumps, Model QYLB800-24C-DQ001 electric submersible screw pump is developed.
针对螺杆泵举升技术存在的问题，开发研制了一种QYLB800 - 24c—d Q001型电动潜油螺杆泵。
First the traditional lifting design method was applied to design the axial flow pump impeller on given flow parameters.
首先采用传统的升力法对给定参数的轴流泵叶轮进行了设计。
Raw water lifting shall be provided with flow control to ensure smooth and continuous variations of the flow entering Densadeg, avoiding sudden increase due to start of the pump at full capacity.
原水提升备有流量控制，以保证进入高密池的水量是尽量平稳而连续变化的，避免在满负荷时水泵的开启造成水量的突然增加。
In the light of the frequent breakdown and badly lifting efficient of using conventional screw pump recovering viscous crude.
开采较高粘度的稠油，常规螺杆泵往往表现出故障率高、举升效果差。
When it comes to the recovery technologies used in Lukeqin oilfield, on the one hand, field researchers improved the core lifting technology of mixing light oil on the pump in practice;
围绕鲁克沁油田开发的采油工艺技术，一方面，现在及研究人员在实践中配套完善了泵上掺稀这一核心举升技术。
Grounding on the working characteristics of PCP lifting system, the pump can be considered as a functional nodal, and the way of technological design is brought forward.
根据螺杆泵举升系统的工作特点，以螺杆泵为函数节点，提出了工艺设计方法。
In the process of oil production, the submersible reciprocating pump is driven by linear motor, such pump application is novel lifting method which has been considered as with good controllability.
在石油开采过程中，利用直线电机驱动潜油往复泵是一种新型举升方式。这种举升方式可使抽油机具有较好的可控性。
According to the lifting system design theory, SAGD rod pump lifting system optimization design software was programmed and tested to design a new lifting system.
根据举升系统设计理论编制了SAGD有杆泵举升系统优化设计软件，并利用软件优化设计了一口稠油sagd井的举升系统。
Starting with the current situations of the screw pump lifting, this paper analyzes the adaptability of the screw pump lifting in alkali-surfactant-polymer flooding and poi...
从三元复合驱螺杆泵举升技术现状出发，分析了螺杆泵举升在三元复合驱应用的适应性，给出了螺杆泵举升技术的应用效果。
Starting with the current situations of the screw pump lifting, this paper analyzes the adaptability of the screw pump lifting in alkali-surfactant-polymer flooding and poi...
从三元复合驱螺杆泵举升技术现状出发，分析了螺杆泵举升在三元复合驱应用的适应性，给出了螺杆泵举升技术的应用效果。
应用推荐