In this study synaptonemal complexes diaplayed two lateral elements in parallel, but central element was indistinct.
本研究中联会复合体均由两条平行排列的侧体组成，其中央轴隐约可见；
The structure is resolved into several compound elements and every compound element consist of three parts: arch, trussed beam and lateral brace.
整个结构划分为若干组合单元，每个组合单元包括拱、桁梁及竖杆横撑架三部分。
According to the elastic thin plate theory and vibration theory, a boundary element method (BEM) was used to analyze the frequency characteristics of a thin plate in lateral free vibration.
根据弹性薄板理论和振动理论，运用边界元法(BEM)分析了薄板弯曲自由振动的频率特性。
A thermally insulative material (102) surrounds the lateral surface of each thermoelectric element (104).
隔热材料(102)围绕每个热电元件(104)的横向表面。
Mechanical behavior of brick walls strengthened with CFRP plates under horizontal lateral load is analyzed using commercial finite element software ANSYS8. 0.
采用大型有限元软件ANSYS8.0，对单调水平荷载下碳纤维加固砖墙的受力性能进行了计算分析。
The finite element model and result are given. The influence on displacement of different finite element model "s lateral boundary and the cavities" radius are discussed.
给出了有限元模型和计算结果，讨论了有限元横向边界不同和孔径大小不同的情况下对位移的影响。
As a new lateral resisting element, steel plate shear wall with vertical slits has favorable integrative benefits.
带缝钢板剪力墙作为一种新型的抗侧力构件，有着良好的综合效益。
The ground surface settlement and lateral deflection of retaining wall for deep excavations are calculated using nonlinear finite element method.
利用非线性有限元方法计算了深基坑开挖引起的地表沉降量与墙体侧向挠度。
In order to reduce the effect of wave reflecting on artificial boundary, transmitting boundary and semi-infinite element are respectively used to treat the lateral and underside boundaries.
考虑到人工截断边界上波反射对计算结果的影响，分别用传递边界和半无限单元来处理侧面和底面边界。
Finite element analysis shows that the lateral stiffness of the concrete grill wa ll can be calculated by an equivalent solid shear wall with the thickness of two third of the original wall thickness.
有限元分析结果表明，保温砌模混凝土墙的抗侧刚度可用厚度为其三分之二的等效实体墙计算或用小开口整体墙计算。
Furthermore, it is shown that numerical simulation is a powerful tool to calculate static lateral pressure with a case study by the finite element method.
此外，通过有限单元法算例说明数值计算方法是求解静止侧压力的有效工具。
Aimed at the steel shear wall with slit, a systematic research is done on the forced performance. By using the finite element soft ware ANSYS, the paper analyzes this lateral resistant member.
针对带缝钢板剪力墙，本文对其受力性能进行了系统研究，并用有限元软件ANSYS进行了分析。
In the analysis, the finite element method and other simplified methods are compared using different models of lateral soil stiffness.
采用不同桩侧土抗力与桩身位移关系的模式，以有限单元法进行分析；
In this paper, a improved geometric stiffness matrix of a column element considering axial force-lateral displacement effects is derived.
本文推导了柱单元受大轴力和单元变形过大两种情况下的单元几何刚度矩阵。
Shear wall is the structural element that resists lateral force.
剪力墙是一种抵抗侧向力的结构单元。
By using ANSYS as the software of finite element analysis, a model is set up for calculating finite element of pile foundation with lateral load.
运用ANSYS有限元分析软件，建立桩基在侧向荷载作用下的有限元计算模型。
Objeclive:To establish a two dimensional finite element analysis model for hard tissue morphology on lateral cephalometric X ray film.
目的：建立X线头颅侧位定位片硬组织形态二维有限元分析模型。
The finite element method is applied to prestressed slabs, the mechanical characters under the normal using load condition are analysised, with unconsidering the lateral restraints.
通过建立预应力楼板的有限元平面模型，分析了框架-核心筒结构预应力楼板不考虑侧向约束影响时在正常使用荷载条件下的受力特点。
Taking the lateral displacement of the cross section and the longitudinal displacement of nodes as the basic variables the finite element analysis of thin-walled member structures is formulated.
导出以截面横向位移和节点纵向位移为未知量的有限元法的基本方程。
Finite element model is set up of supporting load distribution of large rotary kiln by lateral layers and longitudinal sections.
采取横分层、纵分段的方法，建立了回转窑支承载荷分配的有限元模型。
The main content of this thesis is lateral buckling analysis of thin-walled structures with irregular cross section by transformed 63 spline finite member element method.
本文主要分析了具有不规则横截面形状的薄壁结构在横向荷载下的稳定问题。
The lateral vibration of the high-speed rotating disk cutter slice blade was studied by the finite element analysis and the experimental measurement.
针对高速旋转圆盘刀具薄刀片实际工作时存在的横向振动问题，应用有限元方法及实验测量进行了研究。
METHODS: A 3-D finite element model of mandibular complete dentures supported by implants was established to analyze the stress status with protrusive or lateral occlusions.
方法：建立种植全口固定义齿和种植全口覆盖义齿的三维有限元模型，然后进行侧方咬合平衡与不平衡、前伸咬合平衡与不平衡模拟加载分析。
This paper describes a pile groups-soil-pile cap interaction model in the lateral loading and proposes a finite layer-finite element analysis for the single pile and groups pile.
本文研究了水平荷载下桩—土—承台共同作用的问题，对单桩和群桩分别进行了有限层—有限元分析。
The connecting element (20) reliably connects, fixes, and aligns the rails in relation to each other without engaging in the usable space between the lateral limbs and the rear side of the U-profile.
所述连接件(20)可靠地连接、固定和对齐所述壁轨，且不会占用所述u形壁轨的侧翼和背部之间的有用空间。
According to the results by the finite element method, the factor of safety calculated by axial loading stress-strain model is less than the factor of safety by lateral unloading stress-strain model.
依据有限元西安理工大学硕士学位论文法分析，轴向加荷应力路径模型确定的安全系数较围压卸荷应力路径模型确定的安全系数小。
According to the results by the finite element method, the factor of safety calculated by axial loading stress-strain model is less than the factor of safety by lateral unloading stress-strain model.
依据有限元西安理工大学硕士学位论文法分析，轴向加荷应力路径模型确定的安全系数较围压卸荷应力路径模型确定的安全系数小。
应用推荐