Comau, an Italian robot specialist, now produces a 3d remote-laser welding system that helps make the new Fiat 500.
意大利机器人专家Comau，制造了一个3d遥控激光焊接系统，已被用于菲亚特500的制造中。
It has been proven that laser welding is not only a viable, but also a better plastics welding method.
证实了激光焊接是一种可行的、更佳的塑料焊接方法。
It has been proven that laser welding is not only a viable, but also a better alternative to other plastics welding methods.
证实了激光焊接是一种可行的、更佳的塑料焊接方法。
The results indicate that defect free joints with excellent appearance could be acquired by continuous laser welding with flowing helium from top and back sides.
研究结果表明，连续激光氦气双面保护可以获得保护效果可靠、无缺陷、成型良好的焊接接头。
This speech introduces the advantages of ABB's advanced robot laser technologies-robot laser welding, laser cutting and laser tracking, along with their realization in several industrial areas.
本报告将介绍ABB高端机器人激光生产技术——包括激光焊接、激光切割及激光跟踪等的特点，及其在不同工业领域的应用。
And the keyhole is characteristics of deep penetration laser welding.
小孔效应是深熔焊接中的特征现象。
Microstructure and properties of high power laser welding of ship steel plate.
高功率激光焊接船板的组织性能。
SEM showed no pores and other defects and some ductility at laser welding area.
断口扫描电镜观察显示断口有一定的塑性，未发现气孔和焊接缺陷。
Gaseous helium is used as an inert shielding gas in metal arc and laser welding.
在金属电弧和激光焊接中气态氦用作惰性屏蔽气体。
Application of laser welding technology in the production of engineering vehicle.
激光焊接技术在工程车辆生产中的应用。
Thermal focusing is an important factor to influence the quality of laser welding.
热透镜效应是影响激光焊接质量的重要因素之一。
A laser welding quality monitoring method is proposed, based on support vector machine.
提出了一种基于支持向量机的激光焊接质量监测方法。
The toughness of HAZ is higher than base metal under appropriate laser welding conditions.
在合适的激光焊接条件下，热影响区韧性高于母材；
The technological properties of laser welding for aluminum and aluminum alloys are described.
概述了以激光为热源的铝及铝合金激光焊接技术特性。
Conclusion Plasma welding and laser welding are ideal joining methods for titanium in dentistry.
结论等离子焊接与激光焊接是比较理想的牙科钛材焊接方法。
The newly developed modeling methods of deep penetration laser welding are discussed in this paper.
介绍近年来深熔激光焊接过程数学模型的进展。
A special coaxial nozzle was designed to resolve the difficulties of the titanium alloys laser welding.
为了解决这些问题，设计专用同轴喷嘴用于钛合金激光焊接。
The width of laser welds on the top and bottom surfaces of hot rolled plates after laser welding was measured.
测量了激光对接焊后热轧钢板正背表面焊缝宽度，分析了激光焊的焊接速度对热轧钢板焊缝成形和质量的影响。
There is a working procedure of tool tip arc grinding during the laser welding saw blade manufacturing process.
激光焊接锯片生产工艺过程中，有一道刀头磨弧工序。
The penetration depth of weld metal can be increased by selecting correct gas-assisting blowing in laser welding.
激光焊接时正确选择侧吹工艺可以增大焊缝熔深。
The temperature and stress fields of a ring structure laser welding are simulated by finite element method (FEM).
对铍环激光束钎焊过程的温度场和应力场进行了有限元模拟。
The application of laser welding technology in P/M materials and its developing status are systematically introduced.
系统地介绍了激光焊接技术在粉末冶金材料中的应用及其国内外动态。
The diagnose technology of laser welding is very important to assure weld quality and to meet the need of production.
激光焊接质量诊断技术对于保证焊接质量、满足生产需要具有重要意义。
The deep penetration Laser welding is the base of extensive utilization for the high-laser welding of metal materials.
激光深熔焊接是大功率激光焊接金属材料得以广泛应用的基础。
To obtain extra wide steel sheet for automobile use experiments were conducted on laser welding of deep drawing steel sheet.
为拼接超宽汽车用板，对深冲钢板进行了激光焊接试验研究。
This paper introduced the experiment of applying high power, deep penetration laser welding stainless steel tubes-tube plates.
本文介绍了采用大功率深穿透激光焊接不锈钢制压力容器管子—管板环缝的试验结果。
A practical high-power CO2 laser welding and cutting equipment with high beam quality was introduced, the optical system was analyzed.
介绍了一种实用型高功率、高光束质量CO2激光焊接、切割机，分析其光学系统。
To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.
本文针对高质量板材对接填丝激光焊的需要，设计了对缝间隙宽度检测的传感器与送丝控制系统。
Plasma produced in laser welding process has shielding effect to the laser beam and decreases the melting depth on even result in the defect.
激光焊接过程中产生的等离子体对激光束有屏蔽作用，降低了焊接熔深，甚至出现缺陷。
Dimension was resumed by adopting good self - fluxing alloy laser welding technology, and then the surface was enhanced by laser alloying technology.
先采用自熔性好的合金激光熔覆恢复尺寸，再用激光合金化强化表层。
应用推荐