The length of the laser tube was reduced ten times.
这种激光管的长度缩短了十分之九。
Laser tube bending is a flexible metal forming process.
管材激光弯曲成形是一种柔性金属塑性成形方法。
Aim the design of one simple laser linear power source which is used for the work of the laser tube is introduced.
目的介绍一种简单的供激光管工作的激光线性电源的设计。
This article introduced a smart car system based on the technology of infrared laser tube that can identify the path quickly.
介绍了一种基于红外激光管的快速路径识别智能车系统。
The mounting method of the laser tube and the adjusting method of the Tester on-line are also introduced in detail in this paper.
文中详细叙述了激光管的安装方法和联机调试方法。
Laser tube bending is a kind of plastic forming method with high flexibility. It is suitable for small radius bending of thin thickness tube.
管材激光弯曲是一种具有极高柔性的金属塑性加工方法,特别适合于薄壁管材的小曲率半径弯曲。
Taking CO2 laser tube as thermal source, this machine is developed in combination with of electronic technology, mechanical technology and computer.
以CO2激光管做为能源,结合电子、机械、计算机技术研制而成。
From energy balance equation, using micropiece analytical method, heat balance equation for high power fast axial gas flow CO 2 laser tube is established.
从能量守恒定律出发,分析了快速轴向流动激光器放电管中的传热情况。
Numerical solutions of discharge voltage and current pulses on each capacitors and laser tube in the circuit are in good agreement with the experimental ones.
数值求解了电路中各电容器和激光管的放电电压和电流脉冲波形,得到了与实测波形一致的模拟结果。
When the output intensity of a laser is changed, a feedback control signal processed by a digital PID regulator is used to control the current of a laser tube.
利用输出光强变化,通过数字PID调节器反馈控制激光管电流可获得较为稳定的激光输出。
The discharge current pulse of the laser tube obtained by simulation is consistent with that of experimental measurement on the same condition of circuit parameters.
在相同电路参数时,经模拟得到的放电管电流脉冲波形和实测的波形相一致。
Because the power stable, selection of long life laser tube and import lens combination, make ZT series shake the machine service life and reliability is greatly increased.
由于选配了功率稳定、超长寿命的激光管和进口镜片组合,使得ZT系列刻章机寿命和可靠性大大提高。
As the laser tube can be cooled both on the inner - and outer - surfaces of the tube, the thermal effect in SSTL is smaller than that in a rod laser with the same geometry size.
与同样尺寸的棒状激光器相比,由于它可以通过管内外壁冷却激活介质,因此其热效应较小。
Least-square principle method was used to process experimental data and the regression line obtained. The failure mechanism of the He-Ne laser tube under different current has been analyzed.
采用最小二乘估计法对试验数据进行了拟合,得到了回归直线,并分析了不同电流下激光管的失效机制。
The streak tube can be used for ultra-fast process diagnosis in laser physics, photochemistry, photobiology, and so on.
条纹管可用于激光物理学,光化学,光生物学等领域的超快速过程诊断。
The gas flow in the gain tube is one of the main error sources in ring laser gyros.
增益管中气体的流动是激光陀螺中的一项主要误差源。
The operation theory of violet lasing in krypton ion laser and the construction design of the plasma tube are discussed.
本文讨论了氪离子激光器中紫色激光作用的工作原理,放电管的结构设计。
It proposes design proposal of measurement system which based on the laser position transmitter DLS-B15 through the study of each kind of rotary kiln tube body.
通过对各种回转窑筒体偏摆测量方法的研究,提出了基于激光位移传感器DLS—B15的测量系统的设计方案。
Requirements on the shape, duration, distribution in pulse shape and spectral compositions of ultrashort laser pulses in the development of picosecond image tube cameras are briefly described.
概述了研制微微秒变象管相机对超短激光脉冲的形状、持续时间、脉冲形状内的能量分布、光谱成份等的要求。
It is concluded that the laser constant current source made of the synchronously adjustable tandem constant current tube has high constant current characteristic and protective property.
结果表明,用同步可调恒流管串联式电路制作的激光器恒流源具有很好的恒流特性和保护性能。
Solid-state tube laser (SSTL) is one of available laser with high power output, for its high slop efficiency and electro-optical efficiency compared to the solid-state rod laser.
管状固体激光器可获得较高的斜效率及电光转换效率,因此是人们寻求可获得高输出功率的有效器件之一。
Output characteristics were tested under two diluent injecting methods on a single tube discharge excited infrared multi-band chemical laser by taking DF as a typical case.
以DF为例,在一台单放电管电激励红外多波段激光器上测试了两种稀释剂注入方式下激光器的输出特性。
Recently the shock tube has been used to drive gasdynamic laser.
最近,激波管已被用来驱动气动激光器。
The catheter, a tube with a camera and a LASER on the end, could he threaded into the gall bladder and pancreas.
这根导管,是前端装有照像机和激光的管子,可被导入胆囊和胰腺。
Experiment has showed that the uniformity of discharge of fast axial flow CO_2 laser can be improved by a multiple electrode system and a fluid introducing tude in front of the discharge tube.
实验表明,采用多电极和在放电管的入气端加一整流管能有效改善快速轴流CO_2激光器的放电均匀性。
In this laser the discharge tube with an inside diameter of 8mm and discharge length of 300mm is made of water-cooled segmented aluminium disks.
该激光器以水冷分段铝片组成放电管,内径8毫米,有效放电长度300毫米。
A novel heater with a metal pipe was designed which is used encircling the discharge tube of a CuBr laser, resulting in homogeneous distribution of axial temperature.
设计了一种新颖的金属筒式加热器,使气体激光放电管轴向温度分布均匀。
Based on the contact type measuring machine for bent tube, the probe, which is improved by using laser and CCD, can be used to achieve the non contact measurement of a bent tube.
在接触式弯管测量机的基础上,采用激光CCD对测量叉进行改进,实现弯管的非接触测量。
This is the most common trigger mechanism, but it's not the only one in use. Some areas have had success with radar, laser or air-tube sensors.
这是最普通的触发器机构,但不是唯一在用的。一些地区已经在雷达,激光或空气导管传感器上取得成功。
This is the most common trigger mechanism, but it's not the only one in use. Some areas have had success with radar, laser or air-tube sensors.
这是最普通的触发器机构,但不是唯一在用的。一些地区已经在雷达,激光或空气导管传感器上取得成功。
应用推荐