Threshold uniformity is also influenced by laser parameters.
测试激光参数对阈值均匀性也有一定影响。
The expression is only related to the free-running laser parameters and the injected power.
该式仅与激光器自由运转时的参数及注入光功率有关。
The ionization probability evolution with laser parameters is calculated in different cases.
计算了在不同情况下电离几率与激光参数的变化关系。
The ablation characteristics of both materials were investigated by a matrix of tests which varied specific laser parameters.
用改变特性激光参数的测试矩阵研究所有原料的消融特征。
Salt water with the concentration of 3% is used in the corrosion test for the samples welded under different laser parameters.
采用浓度为3%的盐水，对不同激光工艺参数的焊接件进行了腐蚀试验。
Under the different laser parameters, the electron energy gain depends on the laser intensity, focal spot size and pulse width.
不同激光参鼍条件下，得到了电子的能量增益与激光强度、焦斑大小和脉冲宽度关系。
The traditional measuring methods lack multi-dimension display for laser spot profile and systematic analysis for laser parameters.
传统的各种测量方法缺乏对光斑外观轮廓的直观多维显示和对参数的系统测量分析。
In addition, the influence rules between pulsed laser parameters and main profile parameters of roll have been analyzed and investigated.
此外还对脉冲激光参数对轧辊主要形貌参数的影响规律作了进一步的分析和研究。
Furthermore, the influence rules between pulsed laser parameters and main profile parameters of roll have been analyzed and investigated.
另对脉冲激光参数与轧辊主要形貌参数的影响规律作了进一步的研究。
With appropriated laser parameters (pulse times, wavelength) and assisting gas, a desired micro-structures and surface quality can be achieved.
通过选择合适的脉冲次数、激光波长以及辅助气体工艺，可获得较理想的微腔形貌和表面质量。
By employing the semiclassical theory of lasers, a relation between the frequency tuning range and various laser parameters is given in this article.
本文用半径典理论阐述宽带可调谐激光器的调频范围同各种激光器参量的关系。
It was found that the laser transfer in a long distance causes evolution of laser parameters. Laser power, laser pulse shape, pulse width and time ste...
深入研究了激光在厚介质中传输引起激光参数的变化，以及激光功率、脉冲形状、脉冲宽度、三束激光的时间不同步对电离几率的影响。
The dynamic change course under the given laser parameters and the distribution of the temperature field are researched, and the simulation results are perfect.
研究了给定激光技术参数条件下的温度场的动态变化过程以及温度场的分布，数值模拟令人满意。
The product is detected and analyzed using Raman spectrum as the main method. The influences of laser parameters on transformation of graphite are investigated.
以激光喇曼光谱为主要测试手段，分析了合成产物的成分和粒度，研究了激光工艺参数对石墨成分转变的影响作用。
The definition of ablation threshold was summarized and its physics implications were provided. The relationships between ablation threshold and laser parameters...
本文概述了消融阈值的物理含义，给出了消融阈值的定义，讨论了消融阈值与激光参数的关系。
The key factors of laser welding' s quality are applying suitable laser parameters, ensuring that welding head is perpendicular to work piece and focus point is in the right position.
采用合适的激光参数、保证焊接头与工件表面的垂直姿态以及焦点位置是影响焊接质量的关键因素。
Effects of pulsed laser parameters such as laser wavelength, beam spot size, pulse energy and pulse duration on threshold energy in laser simulating Single Event Effect testing are analyzed.
分析了在激光模拟单粒子效应试验中激光波长、束斑大小、脉冲能量、脉冲宽度等脉冲激光参数对阈值能量的影响。
It analyzes the reason that the hardened layer is not well distributed and expresses the terms and approaches of optimizing the laser parameters which satisfy well distribution of hardened layer.
分析了硬化层分布不均匀的原因，提出满足硬化层均匀分布应优化控制激光参数的方法和条件。
The frame and key technological parameters of the laser remote sensing echo waveform collection system were stated.
描述了激光遥感回波波形采集实验系统主要构成以及关键技术参数。
The influence of the parameters such as surface treatment state, laser output power, welding speed, protective atmosphere, and pulse frequency on the welding quality was studied.
研究了试件表面处理状态、保护气体、激光输出功率、焊接速度、激光脉冲频率等工艺参数对焊接质量的影响规律。
According to the result of front experiments, proper dressing parameters are chosen by the experiment of laser single pass scanning.
根据前面试验结果，进行激光单行程扫描试验，找出合适的修锐参数。
Autogeneous CO2 laser welding were run along the butt between two materials using sets of parameters power and travel speed.
采用不同功率和运转速度参数对两种材料进行了CO2激光对接焊。
Constitutional parameters of the pulsed dye laser and properties of the pumping laser are given.
本文给出脉冲式可调谐染料激光器的结构参数及其泵浦源的性能参数。
Furthermore, the effect of aperture parameters on the diffraction characteristics of laser beams with amplitude modulations is also analyzed.
另外讨论了锯齿光阑参数对有振幅调制光束衍射特性的影响。
A narrow linewidth single polarized all fiber ring laser has been fabricated. The structure and the technical parameters are presented.
研制出一种新颖的窄线宽、单偏振输出全光纤环形激光器，并给出了这种激光器的结构和技术性能参数。
In this paper characteristics of field pattern distribution by laser hardening and the important parameters are presented.
提出激光硬化时的激光强度分布特性和主要参数。
The selection of parameters for mini TEA CO_2 laser is analysed.
本文从理论上分析了小型tea CO_2激光器的各主要参数的选择。
The microstructure and hardness of the laser modified surface are governed by the laser processing parameters.
激光表面改性层显微组织与显微硬度受激光处理工艺参数的控制。
At present, the parameters of laser processing are chosen mainly by experiment and through experience.
目前，在实践中仍主要依靠试验和经验来获得激光工艺参数。
At present, the parameters of laser processing are chosen mainly by experiment and through experience.
目前，在实践中仍主要依靠试验和经验来获得激光工艺参数。
应用推荐