The testing technology of laser parameter must match the requests of laser processing industry.
由于激光加工机本身所追求的质量要求促使激光参量测试技术要与之相适应。
The lucid understanding of the laser parameter optimization process would provide use for reference to improve the UV laser performance.
对激光参量优化过程的深入了解，为进一步提高其输出特性提供了借鉴和参考。
It is shown that using the same laser parameter has effect on bonding quality of surfacing and matrix with different layers by optical microcope, microhardness.
对覆层与基体结合机理进行了分析，发现随着堆焊层数的增加，激光堆焊对基材与覆层过渡区有加大的影响。
CONCLUSION: We should choose the laser parameter flexibly in order to ensure effective high proportion pulse energy, which is vital in the treatment of after cataract by YAG laser.
结论：根据后囊膜混浊的程度和视力的情况灵活选择激光参数，确保高比例有效的脉冲能量，是YAG激光治疗后发性白内障的关键。
We analyzed the variation of temperature with time, and construe the effects on parameter of detectors irradiated by laser.
分析瞬态温度场分布随时间变化的关系，讨论了激光辐照对探测器性能参数的影响。
It is shown that the nonlinearity and inhomogeneity of the medium, laser power and input beam parameter affect their propagation properties.
结果表明，介质的非线性性和非均匀性、激光功率及入射光束参数影响其传输特性。
The effects of laser power? speed and defocusing parameter on welding depth and width have been studied in the experiment.
研究了激光焊接输出功率、焊接速度、离焦量等工艺参数对焊接深度及焊接宽度的影响。
In this paper, the influences of some given magnetic targets (submarine, lost ship) to the airborne laser are studied and a parameter is obtained, which is helpful to recognize these targets.
文中研究某些特定的磁性目标(潜艇、沉船等)对偏振激光的影响并试图从中获得识别这些特定目标的参数和提高识别概率。
Using numerical simulation results, basic parameter of fiber laser was analyzed and demonstrated, and which is the theoretical basis for optimized design of fiber laser.
利用数值模拟结果对光纤激光器基本参量进行分析和论证。为光纤激光器的优化设计提供理论依据。
The spot size of laser and its beam waist is the important parameter for assessing the performance of lasers.
激光光斑尺寸和激光束腰光斑尺寸是衡量激光器性能的重要参数。
Using explicit dynamic FEM as a solver, process parameter optimization design on laser bending of rectangular sheet metals was conducted with genetic algorithms (GA).
提出了一种以动态显式有限元为解算器，并采用遗传算法对矩形板激光弯曲成形工艺参数进行优化设计的方法。
The optimal designed algorithm of structure parameter on laser spot source non contact probe is presented integrally.
完整阐述了点光源激光非接触式测头的结构参数优化方法。
It is found that cracks of cladding layer is one of the main defects in the laser cladding of thick layer on the sealing surface of high parameter valve.
在高参数阀门零件密封面上进行厚覆层激光熔覆时，发现覆层裂纹是主要的质量缺陷。
The theory of relaxation oscillation is described, and it give the theories analysis which is the output natural parameter of Q-switch laser.
文中阐述了调Q激光器的弛豫振荡理论，并对电光调Q激光器输出性能参数进行了理论分析。
The main research issues for laser plasma interaction are the propagation and absorption of the laser in plasma, parameter instabilities, the generation mechanism of super-thermal particles, etc.
它主要研究激光在等离子体中的传播、吸收，各种参量不稳定性、超热粒子的产生机制等。
YAG solid laser notching is an technology, but the choice of laser processing parameter depends on experience mainly.
YAG固体激光切槽是当前最先进的连杆裂解槽加工工艺，但其激光加工参数的选择主要依靠经验。
It is very easy to change the output parameter of mode locked laser.
能容易改变锁模激光器的输出参数。
In laser control and guide system, diverging Angle of laser beam is an important parameter.
激光末端制导武器系统中，激光照射指示器出射激光的束散角是一个重要的参数。
The repairing quality of the dies was achieved by optimum parameter of laser cladding and preheating.
通过优化工艺参数、机体预热的方法可以提高模具修复质量。
The key points are the influences of M2 parameter to the beam behavior and Kf parameter to welding quality in laser deep penetration welding.
其中重点讨论了M2参数对焊接中光束行为的影响以及光束聚焦特征参数对深熔焊接工艺参数和焊缝质量的影响。
The laser sintering parameter was optimized successfully according to exported results.
根据输出结果成功进行激光烧结工艺参数优化。
An important parameter characterizing phase conjugation technology used in the powerful laser system is the phase conjugation fidelity.
相位共轭保真度是相位共轭镜技术用于强激光系统中的一个重要指标。
The calculation indicates that the main parameter effecting laser output power is the peak electron temperature, while the limitation of repetition rates is related to the initial electron density.
通过计算揭示出影响激光输出功率的主要因素是峰值电子温度，而重复频率的限制主要取决于初始电子密度。
The data-bases of thermal physical property and laser transformation hardening processing parameter for various kinds of steels can be set up using this system.
应用本系统可建立不同钢种的热物性参数库和激光相变硬化处理工艺参数库。
The laser texturing parameter had been optimized, and the common texture figure of plastic product was designed.
对模具激光蚀刻工艺参数进行了优化；并设计了塑料产品常见的蚀纹图案。
And then, the etching parameter curves were fitted and the effect of laser energy density on the parameters was discussed.
然后，对刻蚀参数进行拟合并探讨了激光能量密度对刻蚀参数的影响。
The emission and receive of semiconductor pulse laser are researched, based on the laser rangefinder theory, parameter measure and character analyzing of semiconductor pulse laser.
通过对基于脉冲激光测距原理的半导体脉冲激光器的参数测量分析，研究了半导体脉冲激光的发射和接收。
The results are that the structure and properties of cladding layer are determined by the laser surface cladding processing parameter and quality of the cladding before laser heating.
认为在低碳钢表面涂覆硬质合金的涂层组织性能取决于激光涂覆工艺与预涂层的质量。
The expression is written as a product of a N order Bessie function, containing parameter of the laser field, times thee-H scattering amplitude without leser fi…
这一振幅可简单表示为一个包含激光场参量的N阶贝塞尔函数乘以无激光场时电子—氧原子散射程函近似散射振幅。
Combustor parameter of all gas-phase iodine laser is studied using the power of HF fundamental laser as a test criterion.
以HF基频激光功率大小作为判断依据， 对燃烧驱动全气相碘激光的燃烧室参数进行了考察。
应用推荐