The results on measurement and laser experiments are given.
给出了测量结果和激光实验结果。
Sophisticated laser experiments are performed regularly in the laboratory.
复杂的激光实验定期在实验室举行。
The calculated results are verified by the measured results of laser experiments.
计算结果得到了激光实验测量结果的验证。
The analytical results obtained can give a reasonable explanation to the physical phenomena observed in CO2-laser experiments.
所得解析结果能较为满意地解释CO_2激光打靶实验中已观察到的有关高次谐波发射的物理现象。
The laser trap can keep a tiny spherical sample — measuring only a millimeter across — levitated so experiments can be done.
激光阱能使一个直径仅1毫米的微小的球形样品保持悬浮，这样就可以做实验了。
The laser trap can keep a tiny spherical sample - measuring only a millimeter across - levitated so experiments can be done.
激光阱能使一个直径仅1毫米的微小的球形样品保持悬浮，这样就可以做实验了。
The report is based on the first experiments from the National Ignition Facility (Nif) in the US that used all 192 of its laser beams.
这个结论是研究人员在拥有192激光束的美国国家点火装置（NIF）进行初步实验后得出的。
According to the result of front experiments, proper dressing parameters are chosen by the experiment of laser single pass scanning.
根据前面试验结果，进行激光单行程扫描试验，找出合适的修锐参数。
Experiments shows that accuracy and robustness of the laser alignment system have been greatly improved by employing parameters self-adaptive PID control algorithm.
实验证明：采用参数自适应PID控制算法，激光准直系统的准值精度和鲁棒性得到显著提高。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列激光烧结实验。
Under the combination effects of ultrasonic and laser, the changes of scatter spectrum of carbon tetrachloride and glycol samples are studied, and the results of the experiments are discussed.
研究了在超声与激光的联合作用下四氯化碳和乙二醇样品的散射光谱的变化，并对实验结果进行了讨论。
The experiments and calculation results prove that the laser weapons can disturb the IR imagining guided system and make the hitting probability decline greatly.
实验和计算结果证明激光能够干扰红外成像制导系统，并使其命中概率大幅度下降；
Then the pulsed solid state laser power and mask machining system is designed through simulations and experiments. And the system working theory is also analyzed.
通过仿真与试验，设计了脉冲固体激光掩膜加工器的电源电路及控制系统，并详细地分析了它的工作原理。
Thermal interaction mechanism of laser diode ignition is investigated through theoretic analysis, experiments and numerical calculations. The critical values and impacting factors are analyzed.
通过理论分析、实验和数值计算研究了激光二极管点火的热作用机理，分析了点火的临界值及影响因素。
The picosecond transient sampling gate is mainly applied in laser fusion and high energy physics experiments for single high-speed pulse real-time sampling.
皮秒级瞬态取样门主要应用于激光聚变实验和高能物理实验中，对单次高速脉冲进行实时取样。
The experiments of cutting stainless steel gear wheel with fiber laser precision processing system, were carried out.
利用光纤激光精密加工系统进行了不锈钢齿轮的切割实验。
The feasibility of laser cladding on repairing of the hermetic surface of valves is proved based on the experiments.
通过该实验，从微观组织方面证明了对气门密封面进行激光熔覆修复的可行性。
A series of experiments are carried out with selective laser sintering (SLS) for copper, copper nickel powder materials.
采用激光选区烧结的方法，对铜、镍-铜混合粉末进行了一系列激光烧结试验。
Hygienic physics experiments were performed on "reflected laser light from the hitting spots" which causes most eye disasters, and measures for eye protection against laser damage are discussed.
针对造成眼灾害原因最多的“激光靶点光斑反射光”做了卫生物理学的实验，讨论了预防激光眼损伤的安全防护措施。
X-ray spectral lines emitted by high temperature plasma can be taken by means of crystal spectrograph in laser-plasma experiments.
在激光等离子体实验中，用晶体谱仪可获得高温等离子体所发射的X光谱。
Owing to its high efficiency, it is especially suitable for the experiments of ultrashort femtosecond pulse laser produced plasmas.
由于其高效率，该谱仪尤其适用于超短飞秒脉冲激光产生等离子体的实验研究。
Calibration experiments were made by CMM and laser tracker as main measuring methods.
以三坐标测量机和激光跟踪仪为主要测量手段进行了标定试验。
The laser speckle interference measuring was integrated into college physics experiments, in which the key obstacle is the production of instrument of pulling-type loading.
将激光散斑干涉测量纳入大学物理实验，其中关键性障碍是拉式加载仪的制作。
The relativistic correction due to earth rotation for both terrestrial and satellite time comparison experiments via laser pulses has been discussed and a practical calculation formula is proposed.
同时还讨论了在地面和卫星的激光时间比对实验中由于地球自转效应的相对论改正问题，提出了一种实用计算公式。
The experiments of base ignition, center-core ignition and multi-point laser ignition are carried out.
进行普通底部电点火、中心传火管点火和激光多点点火的实验工作。
Selective laser sintering of foundry silica sands was investigated by experiments.
对铸造硅砂的选择性激光烧结进行了试验研究。
In experiments, brazing parameters and laser incident Angle were changed during the process. The regularity of appearance of brazing seam in different heat input was obtained.
试验过程中，通过改变钎焊工艺参数及激光入射方式，研究了镀锌钢板激光填丝钎焊在不同热输入下的钎缝外观成形规律。
The paper analyses the failure models and failure mechanisms of "Titan" type I storage and "Scud" ballistic missile shown experiments under strong laser irradiation.
本文对美国报导的洲际弹道导弹“大力神”I型贮箱与“飞毛腿”弹道导弹受强激光辐照演示实验的破坏模式和破坏机理进行了分析。
A computer model has been built to simulate the excitation process of a lead vapor laser results obtained from the model agree with experiments.
本文建立了模拟铅蒸气激光器激励过程的计算机模型，计算结果与实验结果一致。
Aligning and installing methods and the results on laser tuning experiments are presented.
给出动态逐片装调方法和激光调谐实验结果。
应用推荐