• A quality monitoring system has been developed for laser-welded tinplate using specific optic and acoustic signals generated by the plasma during "keyhole" welding.

    针对激光小孔效应焊过程中等离子体辐射出特征光并伴随特征声的现象,提出了采用光声信号联合实时监测激光焊接质量的方案。

    youdao

  • Salt spray test on Al-Li alloy 1420, BT20 titanium alloy and their laser-welded joints was carried out.

    对1420铝锂合金、BT20钛合金薄板及其激光焊接头的耐腐蚀性进行了研究。

    youdao

  • Quinophthalone compound, mixed colorant, laser ray transmitting colored resin composition, and laser-welded product.

    喹酞酮化合物,混合着色剂,透射激光的着色树脂组合物,激光焊接产品。

    youdao

  • Objective:To study the effect of laser-welding gap distance on the mechanical properties of laser-welded cast pure titanium.

    目的:研究激光焊接铸造纯钛时不同的焊接间距对纯钛性能的影响。

    youdao

  • The laser-welded joints for dissimilar metal of pure titanium and Co-Cr, pure titanium and Ni-Cr, showed more brittle characteristics and severe defects.

    纯钛与钻铬或者镍铬合金激光熔接接头脆性大,断面可见严重的裂纹和气孔。

    youdao

  • The segments of the laser-welded small diamond saws are sintered by hot-press, and their density is higher than that of the saws sintered whole, but the sharpness drops.

    激光焊接小锯片刀头是通过热压烧结而成,其刀头比以往整体烧结的刀头致密,但锋利度不够。

    youdao

  • Objective: To evaluate the electrochemical corrosion characteristics and elemental release of laser-welded dissimilar alloy in dentistry: Co-Cr and Ni-Cr alloy in vitro.

    目的:研究激光焊接钴铬-镍铬合金的体外电化学行为及离子释出情况。

    youdao

  • Laser-welded keeper just could be used when there was enough space between the upper jaw and the lower jaw in patients with limited space to design the cast-keepers.

    激光焊接式衔铁适用于颌间距离较为充裕的患者,当颌间距离较小时则可选择铸造式衔铁。

    youdao

  • The mechanism causing various defects in laser welded gears is studied as well.

    分析了激光焊接齿轮所产生缺陷的机理。

    youdao

  • The coarse grain zones of laser welded joint of super fine grain steel show good toughness.

    超细晶粒钢激光焊接接头粗晶区有较好的韧性。

    youdao

  • By taking laser welding, different steel base, hardness, surface treatment sheet steel can be welded together to meet the special requirements of different parts.

    通过激光焊接可将不同材质、不同强度、不同表面处理的钢板焊接在一起,以满足零件不同部位性能的需要。

    youdao

  • Tailor welded blanks are defined as two or more sheets of blanks with equal or different mechanical properties, or surface coatings welded together by laser before stamping.

    激光拼焊技术是将两块或多块具有相同或不同机械性能、不同表面状态的钢板使用激光焊接的方法连接成毛坯件,然后进行整体冲压成轿车结构件。

    youdao

  • Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.

    目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。

    youdao

  • The invention discloses a method for welding pistons by laser. The method comprises: a piston head and a piston skirt, which are respectively made, are welded into a whole by laser;

    本发明公开了一种激光焊接活塞的方法,将分别制造的活塞头部和 活塞裙部,通过激光焊接连为一体;

    youdao

  • The microhardness value of laser welded cast titanium was slightly bigger than that of laser welded wrought titanium.

    激光焊接铸钛的维氏显微硬度略大于激光焊接锻钛。

    youdao

  • As early as 1962 a ruby laser welded a detached retina to a patient's eyeball to save their vision.

    早在1962年,一台红宝石激光器将病人脱落的视网膜与眼球重新连接,使他恢复了视力。

    youdao

  • The equal reverse deformation on the workpiece was proposed before welding, and the welded workpiece was measured using CMM after laser welding test.

    在焊接前对工件施加对应量的反变形,进行激光焊接实验,再用三坐标测量仪测量焊接件。

    youdao

  • Mechanical properties of pure titanium laser welded joint were tested by universal testing machine.

    采用电子万能试验机测试钛金属激光焊接头的力学性能。

    youdao

  • The article introduces the application of laser processing technology in automotive industry abroad , laying stress on the demand and development of tailor welded blanks.

    简要介绍了激光加工技术在国外汽车工业中的应用情况,重点讨论激光拼焊板的需求及发展趋势。

    youdao

  • The composition and microstructure of the diamond saw blade joint welded by laser welding were studied using X ray diffraction and SEM, and the mechanical properties of welded joint were measured.

    利用x射线衍射分析和扫描电镜,研究了金刚石锯片激光焊接接头的成分和组织,并测试了接头的力学性能。

    youdao

  • Due to the special manufacture craft and the new structure of laser welded dimple-plate jacket, it is necessary to be studied by experimental and theory analysis (mainly finite element analysis).

    由于激光焊蜂窝夹套的特殊制造工艺及其新颖结构,需对其进行一个系统的实验研究和理论分析(主要是有限元数值模拟分析)。

    youdao

  • Salt water with the concentration of 3% is used in the corrosion test for the samples welded under different laser parameters.

    采用浓度为3%的盐水,对不同激光工艺参数的焊接件进行了腐蚀试验。

    youdao

  • Porosity is apt to occur in deep penetration laser beam welding, which has severe influence on the mechanical properties of laser welded joint.

    针对激光深熔焊过程中易出现的气孔问题,作者提出光束摆动激光焊接减小气孔倾向的工艺。

    youdao

  • The results indicate that laser welded joint is qualified to satisfy the demand of sheet forming.

    讨论了焊缝特性对于差厚拼焊板成形性能的影响。结果表明,激光焊缝能够满足板料成形的要求。

    youdao

  • Satisfied laser wire welded joints and laser-arc hybrid welded joints were obtained at several plate thicknesses.

    在多种板厚条件下获得了良好的激光填丝和激光电弧复合焊接接头。

    youdao

  • Some measures can be used in the mold structure and workpiece size in advance, when designing the mold, which can provide compensates for the springback of laser tailor-welded blanks.

    因此,在设计模具时可以预先在模具结构及工件部位尺寸上采取措施,对激光拼焊板的回弹进行补偿。

    youdao

  • Some measures can be used in the mold structure and workpiece size in advance, when designing the mold, which can provide compensates for the springback of laser tailor-welded blanks.

    因此,在设计模具时可以预先在模具结构及工件部位尺寸上采取措施,对激光拼焊板的回弹进行补偿。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定