Other uses for this high power diode laser bar are as a direct source for various materials processing applications including cladding, welding, heat treating and brazing.
该高能半导体激光器的其他用途包括，用作各种材料处理应用的激光光源，这些处理应用包括覆层、焊接、热处理和铜焊接。
Obviously, this is very significant because the coaxial powder feeding laser cladding is easy to realize automation and big area cladding.
显然这是很有实际意义的，因为同轴送粉比预置粉末更易于实现自动化和大面积激光熔覆。
Laser cladding and its characteristics is introduced simply. Test running after repairing proves that the anticipation effect is achieved with the technology.
简要介绍了激光熔敷技术和特点，修复后的检测运行结果证明，使用该工艺方法达到了预期的效果。
The paper deals with the reasons of producing defects and its control methods in laser cladding and laser surface alloying process.
论述了激光熔覆与合金化层缺陷的产生原因及其控制方法。
The Ni based coating on 45 steel has been obtained by laser cladding technology.
采用激光熔覆技术在45钢表面获得镍基合金涂层。
Prediction of characteristic and performance of laser cladding for al alloy based on artificial neural network.
基于人工神经网络的铝合金激光熔覆层特征与性能的预测。
According to the test data, the quality of locomotive valve by laser cladding will be better.
根据研究数据，激光熔覆技术应用于气门密封面生产将进一步提高质量。
The feasibility of laser cladding on repairing of the hermetic surface of valves is proved based on the experiments.
通过该实验，从微观组织方面证明了对气门密封面进行激光熔覆修复的可行性。
This paper discusses wear life of laser cladding samples with the aid of the theory of contact fatigue wear.
利用接触疲劳磨损理论讨论激光熔覆试样的疲劳磨损寿命问题。
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
The study results have a valuable meaning in practical application for the laser cladding technique.
研究结果对激光熔覆技术的应用具有实用价值。
By laser cladding, the sealing face of the in outlet valve parts in methylamine pump in urea production line has been strengthened.
采用激光熔覆技术对尿素生产线上的甲胺泵进排液阀零件密封面进行强化。
The repair of ventilator axle journal with serious wear was achieved by using the method of laser cladding.
采用基于激光熔覆的方法实现了大磨损量的风机轴颈的修复。
The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
The relative theoretical and technological problems in the research field of laser cladding ceramic layer in recent years were summarized in this paper.
对近年来激光熔覆陶瓷涂层技术中的有关传热和界面特性等理论问题及与之相应的工艺方面的研究进行了归纳总结。
The state of research of laser cladding in the stress concentration zone is briefly introduced.
介绍了激光熔覆应力集中区研究的概况。
The microstructure and wear resiStance of laser cladding layers of Ni and Cr onthe surface of stainless Steel were studied.
研究了不锈钢表面镍铬激光熔敷层的组织与耐磨性能。
Using laser cladding technique to harden the working surface of new hot die or repair the used one shows a good prospect in industrial application.
用表面激光熔覆技术强化模具表面或旧模具修复，具有广阔的应用前景。
The damaged parts of the acid pump were repaired using laser cladding technology and domestic alloy materials. The acid pump runs well after repair.
后采用激光熔覆技术和国产合金材料对酸泵受损部件进行了修复，修复后酸泵运行良好。
The experimental results show the obvious influence of the scanning speeds on the microstructure and properties of the laser cladding.
结果表明扫描速度对激光熔覆组织和各种性能影响特别显著。
This paper deals with the technique of laser cladding on contact surface of gears, micro hardness distribution, microstructure and properties of cladding and transition layer.
研究齿轮齿面激光熔覆粉末合金的工艺、显微硬度分布、熔覆层及过渡层等的金相组织及性能。
It is found that cracks of cladding layer is one of the main defects in the laser cladding of thick layer on the sealing surface of high parameter valve.
在高参数阀门零件密封面上进行厚覆层激光熔覆时，发现覆层裂纹是主要的质量缺陷。
YAG laser is fitter than CO2 laser for laser cladding and laser directly metal forming manufacturing.
YAG激光比CO2激光更适用于激光熔覆和激光金属直接成形制造。
In this article the laser cladding technology is outlined, and the effect of laser cladding parameters on the quality of cladding layer is introduced.
本文概述了激光熔覆技术，介绍了激光熔覆工艺参数对熔覆层质量的影响。
Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.
气门密封面激光熔覆的工艺和性能研究较多，但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。
Laser refabrication is a kind of new green reconstruction technology that based on laser cladding.
激光再制造是一种以激光熔覆技术为核心的新兴绿色修复技术。
Laser cladding rapid Manufacturing (LCRM) is a new rapid shaping technology, which is the integration of laser cladding theory and rapid shaping technology.
基于激光熔覆的快速制造技术(LCRM)是一项近几年才兴起的快速成形技术，它是激光熔覆理论和快速成形技术的集成。
Laser cladding rapid Manufacturing (LCRM), which is the integration of laser cladding theory and rapid prototype technology, is a new rapid prototype technology.
基于激光熔覆的快速制造技术(LCRM)是一项近几年才兴起的快速成形技术，它是激光熔覆理论和快速成形技术的集成。
Laser quenching, laser cladding and laser surface alloying, as well as microstructure and properties were presented. The properties and research progress of intelligent coating were reviewed.
介绍了激光淬火，激光熔凝，激光表面合金化等材料表面改性技术及其组织和性能；综述了智能涂层的特点及研究进展。
Hardfacing, laser cladding, laser melt injection and plasma melt injection were introduced, and the virtues and defects of all the methods were discussed.
详细介绍了堆焊、激光熔覆、激光熔射、等离子熔化-注射等颗粒增强表层复合材料的制备方法，并分析了各种制备技术的优缺点。
应用推荐