This paper gives a new method of structure analysis, called joint matrix method.
本文提出了结构分析的一种新方法——节点矩阵分析法。
METHOD an analysis was made with the 370 patients in our hospital diagnosed as bone and joint tuberculosis.
方法对本院370例入院诊断为骨与关节结核的病例进行综合分析。
It is shown that this method is useful for the failure analysis of LCD conductive gold spacer joint performance and the reliability design and validation of LCD devices.
实践证明，该方法在进行导电金球连接性能失效分析及LCD器件的可靠性设计及验证方面有较大的帮助。
Joint time frequency analysis method is a powerful tool for study of this kind of signal.
联合时频分析的方法是研究这类信号的有力工具。
A reassignment method for nonstationary time-frequency joint analysis is introduced.
介绍了非平稳信号时频联合分析中的重排方法。
Based on analysis positive and reversal motion of KLD-600 robot, planning of trajectory is analyzed in detail by the method of joint space and the basic model of the control program is created.
在对KLD- 600机器人的正逆运动学分析的基础上，采用关节空间法分析了轨迹规划，建立了控制程序基础模型。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
Joint time-frequency analysis is an important tool in seismic signal processing. With various realizations, this method is widely used in seismic prospecting.
联合时频分析是地震信号处理的一种重要分析工具，方法很多，应用广泛。
Fatigue analysis for civil aircraft fuselage typical truss joint in serving environment was discussed, in which detail fatigue rating (DFR) method in corrosive environment was used.
采用腐蚀条件下的细节疲劳额定值(DFR)方法对民机机身典型长桁机加接头结构进行了综合环境下的疲劳分析。
The finite element analysis method, the test, the construction, the joint connection and the actual deflection dat.
介绍了双向组合楼盖的有限元分析方法、试验、施工、节点构造以及现场实测挠度结果。
Based on the analysis, a new method to detect carrier frequency of FSK signal named time-domain joint and modern power spectrum estimation is put forward.
对电力远动通道FSK信号进行了时域和频域分析，在此基础上提出了一种新的FSK信号载波频率测量方法—时域拼接结合现代功率谱估计的方法。
Method To link pivot shaft joint strain half dislocation morbidity age and occupation distribution statistical analysis.
方法：对寰枢关节劳损性半脱位发病年龄和职业分布统计分析。
Method: To the joint in the bone fracture 56 examples surgeries indication, the surgery opportunity, the margin choice, the bone fracture replacement and in fixedly carry on the review analysis.
方法：对跟骨关节内骨折56例手术适应症、手术时机、切口选择、骨折复位及内固定进行回顾性分析。
The analytical method used is proved effective for the modelling and program analysis of the kinematics of joint transmmition in multibody mechanical systems.
上述研究为多刚体机械系统中万向节传动装置的运动学建模及程序计算分析提供了一种有效方法。
The method of stress analysis for pipe with special joints including Y joint and taper - taper joint is indicated through the analysis of vacuum transfer line.
本文通过对减压转油线的应力分析，说明了特殊形状三通管道（包括Y形三通、裤形三通） 的应力分析方法和过程。
This article puts forward the basic method to reduce the heating of conductor joint based on analysis.
分析了导体接头发热的原因，提出了减少接头发热的基本方法。
Energy dispersive X-ray spectroscopy(EDX) is a kind of analysis method used in researching the adhesive joint and polymer composite surface and interface characters.
EDX是一种研究粘接接头和聚合物基复合材料表界面性能的分析测试方法。
How to design and develop dynamic analysis method of long-range fire tactics based on quantitative analysis is one of the most important problems in research on disposition for joint operation.
用定量动态分析方法开发远程火力战法是联合作战规划中必须解决的重要问题。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
This paper advances the method of joint and partnership between two pumping jacks and makes quite strict theory analysis.
本文提出了对抽油机联机配对的使用方法，并作了较详尽的理论分析。
The curves generated by random fractal method simulating natural joint profiles in analysis will bring great convenience in researches.
用随机分形产生的曲线代替自然节理剖面进行分析，会给研究人员带来极大的方便。
The analysis method provides some theories foundation for the safe assessment on welded joint strength in rotation blade.
本分析方法为旋转体焊接接头强度校核提供了一定理论基础。
The authors of this paper have put forward the method of automatic recognition of joint points in the human body by means of image sequence analysis and feature extraction.
本文提出用图象序列分析和特征抽取的方法来自动识别人体关节点。
It is quite complex and difficult to simulate bolt pretension accurately in the analysis of bolt joint by finite element method.
在螺栓联接的有限元分析中准确模拟螺栓的预紧力是一项复杂而困难的工作。
This method analyzes VHF and UHF signal of detected cable joint, using time and frequency analysis. This method can be used for detecting PD pulse inside or outside the insulating joint.
该法对电缆绝缘接头处VHF和UHF信号的时域和频域分析可有效地识别被测电缆绝缘接头部内、外部的局放信号。
This paper introduced the method and result of conducting a finite element analysis on the cold forged reinforced thick wall tee joint.
本文介绍了对冷锻厚壁加强三通进行有限元分析的方法和结果。
Based on finite element method, break analysis and the measured data, the paper analyzes the breakage reasons of universal joint.
根据有限元计算、断口分析和实测数据对万向接轴断裂的原因进行分析。
Moreover, an experimental method of touch pin measurement to analysis solder joint shapes was put forward, the results show the calculating results and the experimental results were identical well.
提出了一种用触针测量法研究焊点三维形态的实验方法，并对计算结果和实验结果进行了比较，结果表明，计算结果与实验结果吻合良好。
Design parameter analysis for the joints is carried out through finite element method so as to find out the influence of diaphragm thickness, extend length, axial compression ratio on joint behavior.
进行了节点参数分析，通过有限元数值计算，掌握了隔板厚度、挑出长度及轴压比对节点性能的影响规律。
Design parameter analysis for the joints is carried out through finite element method so as to find out the influence of diaphragm thickness, extend length, axial compression ratio on joint behavior.
进行了节点参数分析，通过有限元数值计算，掌握了隔板厚度、挑出长度及轴压比对节点性能的影响规律。
应用推荐