And it is the groundwork of later jacket structure finite element analysis.
对夹套材料的弹性、塑性性能进行研究，为有限元分析打下基础。
Then it summarizes the computing methods of reliability of jacket structure members and structure system.
然后概述了平台结构构件的可靠度计算方法，平台结构系统的可靠度计算方法。
With a jacket structure for heat preservation, more beneficial to ripeness and sterilization of materials.
具有夹套保温层，更利于物料熟化和杀菌。
And it is designed as water jacket structure heating, making the temperature in the cabinet more stable and reliable.
而且设计为水套结构加温，使箱内温度更稳定、可靠。
The linear fatigue of the jacket structure was evaluated by using wave spectrum analysis theory and theory of linear cumulative damage.
采用随机波浪谱和线性疲劳累积损伤理论对导管架式海洋平台在波浪荷载作用下的疲劳可靠性进行研究。
Thus three welding crafts can be used in the fabrication of offshore jacket structure directly and the offshore jackets need no heat treatment after welding.
所评定的三项焊接工艺可以直接用于海洋平台导管架建造，焊后允许不进行热处理。
Jacket platform was assumed as steel frame structure and optimum design method was performed. Total weight of the structure was selected to be optimal objectives.
建立了地震作用下导管架海洋平台结构优化的数学模型，把导管架海洋平台看作钢框架结构，并把优化方法用于结构的抗震设计中。
A multi objective design is proposed by assuming the jacket platform as a steel frame structure.
把导管架海洋平台看作钢框架结构，并把多目标优化设计方法用于结构的设计中。
The assessment research method and programme structure assessment for offshore jacket platform by using SESAM software of DNV were introduced and assessment result was gained.
介绍了应用挪威DN V船级社sesam软件进行海上平台导管架结构的评估方法和程序，并得出评估结论。
Both the structure of die without punch guidance and protecting jacket are analyzed, and opinions that intensity of blanking small punch should be verified are concluded.
对无凸模导向和保护套的模具结构进行分析，提出冲裁小凸模强度核算应考虑的问题。
Through the technology analysis of the complicated constitution of plug jacket, the injection mould structure and the working process were determined. The design characteristic was introduced as well.
通过对插接护套复杂结构的工艺分析，确定了该类制件的注射模结构、工作过程，并对其设计特点进行了介绍。
An exposition is given of the structure, improvements made and causes for damage of the jacket boiler and its present use.
对夹套锅炉的结构、改进、损坏原因以及目前夹套锅炉应用情况进行了论述。
This paper briefly outlines the major features of the jacket and topside structure in Pinghu oil and gas field development.
概括了平湖油气田开发工程中使用的导管架和平台上部结构的特点。
QHD 32-6 SPM consists of a conventional jacket, topside structure, soft yoke assembly, mooring support and transfer assembly.
秦皇岛32—6油田的单点系泊系统包括常规的导管架、上部结构、软刚臂、系泊支架和传输系统。
Jacket platform was assumed as steel frame structure and multi-objective design method was performed.
把导管架海洋平台看作钢框架结构，并把多目标优化设计方法用于其结构的抗震设计中。
Due to the special manufacture craft and the new structure of laser welded dimple-plate jacket, it is necessary to be studied by experimental and theory analysis (mainly finite element analysis).
由于激光焊蜂窝夹套的特殊制造工艺及其新颖结构，需对其进行一个系统的实验研究和理论分析(主要是有限元数值模拟分析)。
Jacket platform was assumed as steel frame structure and the pile-soil-structure interaction was considered. Optimum method was applied to aseismic design of structure.
本文把导管架海洋平台看作钢框架结构，考虑了桩—土—结构的动力相互作用，并把优化方法用于结构的抗震设计中。
The jacket offshore platform is a spatial structure, and the computation of its response to the multiple seismic excitations is complicated.
导管架海洋平台是一种空间结构体系，在多维地震动作用下的反应计算较为复杂。
The lifting type jacket and integrated deck structure have significantly simplified offshore installation of the platform and greatly reduced the weight of the structure.
吊装式导管架和整体吊装甲板显著地简化了平台的海上安装并且大量地减轻了结构质量。
The offshore jacket platform is a complex nonlinear space structure.
海洋导管架型平台是一个复杂的非线性空间结构。
Annual inspection and special inspection and jacket for ship and platform, system inspection for ship structure, equipment and piping and evaluate for their natural life.
船舶、钻井平台、导管架的年检、特检以及船体、机电设备、管线的系统检验和寿命评估等。
Through analysis of the plastic jacket for precision plastic molding, detailed introduced precision plastic molding, and puts forward the essence of typical position and mold structure.
通过对该护套塑件的分析，对精密塑料件成型模具进行详细的介绍，提出了精密塑料件成型时的精定位问题和对典型模具结构阐述。
Offshore platform is a large spatial truss structure, whose key part is jacket.
海洋平台作为一个大型空间桁架结构，导管架是其中的关键部件。
Structure performance: biological solid fermenter is composed by driving system, outer jacket, inner cylinder, heating, sterilization, cooling system and spraying device, etc.
结构性能：生物固体发酵罐由传动系统、外夹套、内筒体、加热、灭菌、冷却系统、喷淋装置等几部分组成。
Laboratory test sieve shaker advanced structure, good performance with a conversion rate of big, strong vibration, easy to use, screening effective, easy to use and flexible jacket and so on.
实验室振筛机结构先进，性能良好，具有转制幅度大，振动力强，使用方便，筛选效果好，使用夹套方便灵活等特点。
The jacket cap for drilling is temporal structure and it can be used about 1 to 2 years.
钻井帽是临时性结构，使用时间即给定周期，一般约1～2年。
A detachable double-jacket tube structure cryoprobe was developed.
研制了离合式套管结构冷冻探针。
A detachable double-jacket tube structure cryoprobe was developed.
研制了离合式套管结构冷冻探针。
应用推荐