In RUP terms, we rebuild the Business Use Case and its Business Analysis Model.
在RUP的术语中，我们重新构建业务用例及其业务分析模型。
In this step, we mainly try to apply both analysis and design patterns to make the model better formed that would increase its potential for reuse.
在此步骤中，我们主要尝试应用分析和设计模式，使模型形式更加良好，从而增加重用潜力。
Figure 9: the Use-Case Analysis model and its traceability links to the other model elements.
图9：用例分析模型，及其到其他模型元素的可追溯性链接。
Many relevant patterns are applicable for the analysis and design of the model and its implementation (see Pattern solution).
有许多相关的模式都可以应用在模型的设计和实现上（参考模式解决方案）。
SAS system can totally meet the demands of this model with its perfect data management functions, strong data analysis ability and data mining ability.
SAS系统以其完善的数据管理功能、强大的数据分析能力和数据挖掘能力完全能够满足该模型的需要。
Quantitative analysis of time performance is key to guarantee the validity of business process model and to improve its quality.
时间性能的定量分析是保证流程模型有效性和提高业务流程质量的关键。
The reliability analysis of DC sensor based on its reliability model is processed, and the methods used to improve the system reliability are presented.
基于可靠性模型对该直流传感器进行了可靠性分析，并提出了改进系统可靠性的措施。
This paper discusses how to found its optimal model through the analysis of model check countermeasure and proposes its solution based on linear and non-linear programming.
通过对模型校验策略的分析，讨论了如何建立这一问题的优化模型，并给出了基于线性规划和非线性规划的模型求解方法。
The model of effect information entropy project risk analysis has its unique theory and method in solving these problems.
而效应信息熵工程风险分析模型却在解决这一问题方面上有其独特的理论与方法。
Discussed the basic geostatistics concept of regionalized variable, variogram and its theoretics model, variogram curve, configuration analysis etc.
论述了区域化变量、变异函数及其理论模型、变异曲线、结构分析等地质统计学的一些基本概念。
Especially with the applied linear model, people know the data better by its powerful analysis and diagnostic ability.
尤其是线性模型的应用，因为其强大的分析诊断能力，使得人们对数据有着更深入的了解。
Objective To develop the experimental model for explosive blast under water and analysis its distribution characteristics.
目的建立水下爆炸性冲击波实验模型并分析其应力分布特性。
The article first gives a definition to technology conversion, and then makes a systematic analysis of it, elaborating theoretically on its model, characteristics and principles.
首先对成果转化做了界定，然后进行成果转化的系统分析，并从理论上阐明了成果转化的模式、特点及其设计原则。
Then the paper presents a heater model with new rotor structure, and its static magnetic field analysis is given.
提出了一种新结构转子的无焰加热器模型，并对其进行了静磁场分析。
Finally, the applicability and validity of the model are testified through its application to OOS development and its effect analysis, and so the theory framework of this thesis is consummated.
最后，通过该模型在外包软件开发实例中的应用及其效果分析，验证了其适用性和有效性，从而完善了本文提出的理论框架。
The model is developed on the basis of physical analysis. Its parameters are related to some physical quantities, which are obtained from design data.
该模型是以物理过程分析为基础，其参数都是物理量，这些物理量来源于设计数据。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
By using the nonlinear layer-element analysis model and its theory which is proposed by the authors of this paper, the reinforcement of liquefiable foundation is analyzed and studied.
运用作者提出的桩上相互作用动力非线性层元分析模型和建立的理论公式，对可液化地基的加固问题进行了分析研究。
This paper proposes a new method of the FTS analysis and develops its parameter evaluation and model order estimation.
本文提出FTS分析的新方法，并研究它的参数估计和模型定阶。
The results show that this thermoeconomic cost diagnosis analysis model is closely consistent to routine analysis method, and its reliability is high.
结果表明，热经济学的成本分析模型同常规的分析方法结果一致，进一步验证了其分析的准确性和有效性。
The importance of evaluation of maintenance service quality was pointed out and its hierarchy structure was constructed. Analysis model and calculation method were put forward with a specific example.
分析了进行维修服务质量评价的重要性，建立了维修服务质量评价的层次结构，提出分析模型和计算方法，并给出了一个具体实例。
After the analysis of the principle and structure of the IMU, its multi-signal model is built based on multi-signal flow graph.
基于多信号流图，文章详细分析了某惯测组合的工作原理和结构，建立了多信号模型。
In this paper, the problem of maximum income in credit card industry is considered, a mathematical model of this problem as well as its analysis is given and solved.
研究信用卡产业收益最大化的问题，建立了收益最大化的数学模型，并对模型进行了求解且对求解结果进行了分析。
Numerical model for RTM process analysis is established by finite element method, and its calculation method is given.
本文建立了利用有限元法进行RTM工艺分析的数学模型，并给出了具体的计算方法。
To research on it and contribute to its development, this paper brings forward a business model analysis framework which is applicable to handset two-dimensional code business.
手机二维码业务作为一种新兴业务具有广阔的应用前景，本文为分析其商业模式，提出了适用于手机二维码业务的商业模式分析框架。
Conclusion: it is imperative to study the complexity of cell signaling system by constructing networks model for analysis of its topological structure properties.
结论：通过构建网络模型来分析细胞信号转导网络的拓扑结构属性对复杂性细胞信号系统进行研究是很有必要的。
Based on the analysis of industry helical motion, spiral motion model is established, and a "total error" concept is proposed for its error analysis.
本文在对工业螺旋运动理论分析的基础上，建立了螺旋运动的数学模型，并对其误差进行了分析，提出了螺旋运动“全误差”的概念。
The finite element modal analysis of an effective model has been done after building up its analytic model by applying modern CAD techniques.
利用现代CAD技术建立有效的有限元分析模型，并在此基础上对其进行有限元模态分析。
The finite element modal analysis of an effective model has been done after building up its analytic model by applying modern CAD techniques.
利用现代CAD技术建立有效的有限元分析模型，并在此基础上对其进行有限元模态分析。
应用推荐