Temperature rise of implanted samples have direct influences on properties of ion implantation layer.
注入样品的温升对离子注入层的性能有直接影响。
The quiescent solution layer can be maintained until the reducing agent ion in the solution layer is substantially depleted.
可以维持静止的溶液层，直至基本上耗尽在溶液层中的还原剂离子。
A sheet containing one layer, but with a coating of metallic lithium on the other side, ACTS as a lithium-ion battery.
如果单层纳米管道的另一面被覆盖了金属锂的涂层，这样的平板就颇似一个锂离子电池。
The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.
研究了在不同气氛下进行离子渗氮对TC 4钛合金渗氮层的组织与性能的影响。
A low power cylindrical anode layer ion source and its working characteristic, and the beam distribution are introduced.
介绍了一种低功率圆柱形阳极层离子源的工作特性和束流分布特性。
The experiments were made possible by a novel, one-layer ion trap cooled to minus 269 C (minus 452 F) with a liquid helium bath.
实验利用了一种单层离子势阱，并将其浸在液氦浴中冷却到零下269摄氏度。
Coating by physical vapour deposition (PVD), coating by chemical vapour deposition (CVD) and surface layer modification by ion implantation, all three are being tested and are partly in use.
涂层的化学气相沉积(CVD)和表面层改性的物理气相沉积(PVD)涂层的离子注入，所有三个正在受到考验，并部分使用。
We derived formulas of thickness of absorbed layer and etching rate of an ion beam from the formula of intensity peaks.
由谱峰强度公式导出了吸附层的厚度和离子束对其剥离速率的表达式。
For erbium ion in light-emitting layer with light activated process and other chemical reaction, it is necessary to anneal the devise with high temperature in fabrication process.
为了让发光层内铒离子具有光活化及其他的化学反应的发生，在制程中热退火是必须的。
A new plasma immersion ion implantation (PIII) technique was employed for implanting nitrogen ions in steel 45. The composition, microstructure and property of the implanted layer were analyzed.
采用等离子体浸没式离子注入对45钢进行氮离子注入。对注入表层的成分、组织和性能进行了分析。
Design of the magnetic loop for the linear anode layer ion source was given.
给出了线性阳极层离子源磁路的设计。
In addition, the poly tiles themselves increase the thickness of the isolation between active silicon regions when it must serve as a self-aligned blocking layer for an ion implantation step.
另外，当有源硅区之间的隔离必须充当一离子注入步骤的一自行对准阻挡层时，所述多晶硅瓦片本身增加所述隔离的厚度。
The glassy transition temperature of ion implanted layer decreases along with the increase of dose, the decrease of the glassy transition temperature is independent of implanted ion type.
注入层的玻璃化转变温度随注入剂量的增加而降低，玻璃化温度降低和注入离子的种类无关。
Meanwhile, the form of the resin layer in the fresh water compartment is analyzed, with a detailed description made of the ion migration behavior in the EDI demineralization process.
同时对淡水室树脂层态进行了分析，详细描述EDI脱盐工艺中的离子迁移行为。
This thesis selects hydrotalcite as selective IR absorption material by its characters of layer and ion-exchangeable.
本论文利用水滑石层状结构特点和层间离子的可交换性，将其作为选择性红外吸收材料。
Through the warm effect, an increase of water cooperation with the foot and skin permeability, so that the dermis layer and mucosal easily absorbed drug ion.
即通过温热效应，增加了水合作用和足部皮肤通透性，从而使真皮层及黏膜容易吸收药物离子。
The metal oxide layer acts as a protecting layer to prevent deterioration of the phosphor due to ion bombardment.
该金属氧化物层起保护层的作用，以防止因离子轰击而破坏该磷光体。
By changing the nolch local ion of Charpy impact test specimens studied the effect of nolch location on toughness and cracking process in multi-layer welds.
通过改变焊缝夏比冲击试样的缺口取向，研究了缺口位向对多层焊缝金属韧性及断裂过程的影响。
A lithium ion battery with cell elements includes a cathode, an anode, and an electrolyte layer between the cathode and the anode.
一种具有电池单元的锂离子电池，其包括阴极、阳极以及阴极和阳极之间的电解质层。
The magnetron-sputtering ion plating aluminum film is not simply an out- covering layer of a single substance, but an alloy film containing both aluminum and copper.
磁控溅射离子镀铝膜不是简单的单质外接铝膜，而是铜和铝组成的合金膜。
A computer program has been set up to simulate the formation process and final structure of AlN layer on the basis of the formation mechanism of AlN buried layer by ion implantation.
基于离子注入形成A1N埋层的机理，利用计算机程序动态模拟A 1n层的形成过程及终态结构。
Hydration of ion has bad influences on double-layer capacitance of carbon electrode, which can be reduced effectively by selecting large ion or increasing pore size of carbon electrode.
离子水化对炭电极的电容产生不利影响，选用大离子和增大炭材料的孔径，可有效降低离子水化对炭电极电容性能的影响。
The experiment shows that the compound layer with nitride and oxide is obtained in surface of 45 steel by the combined treat of ion nitrocarburizing and oxidizing. The compou…
结果表明，45钢经离子氮碳氧复合渗处理后，表层可获得化合物和氧化物的复合渗层，明显提高45钢的耐磨性能。
The structure and property of 40Cr steel ion?nitrided layer in the different nitrided atmosphere were investigated by means of Ion Microprobe, XRD, Microscope Analysis and so on.
采用金相组织分析、显微硬度测试以及普通辉光离子氮化炉等方法和设备 ，研究经不同方式预处理的氨气对离子氮化速度和氮化层组织的影响。
In this paper we introduce the researches on ion implantation. modification of surface layer composition, construction, conductivity and gas sensitive characterization of gas sensitive materials.
本文介绍离子注入技术对气敏材料表面层组分、结构、电导率及气敏特性进行改性的研究进展。
In this article, double layer glow discharge is discussed in terms of the theory of gas discharge and experiments on ion nitriding equipment and technology.
本文在离子氮化装置及离子氮化工艺试验研究的基础上，根据气体放电理论，提出并讨论了双层辉光放电现象。
Titanium ion implantation formed compounds and alleviated the oxidation of the ferric element in the surface layer.
并在表面形成化合物，减轻了材料表面铁元素的氧化；
The boundary layer is characterized by a concentration gradient of the oxidized ion. Diffusion of the reducing agent ion through the boundary layer controls the REDOX reaction.
边界层的特征在于被氧化离子的浓度梯度，还原剂离子的扩散通过边界层控制了氧化还原反应。
The local geology favours the retention of contaminants by ion-exchange processes within the clay-rich soils and the shale layer underlying the burial site.
当地的地质条件有利于污染物的滞留，通过埋藏点之下的富粘土土壤和页岩层中的离子交换过程而进行。
The local geology favours the retention of contaminants by ion-exchange processes within the clay-rich soils and the shale layer underlying the burial site.
当地的地质条件有利于污染物的滞留，通过埋藏点之下的富粘土土壤和页岩层中的离子交换过程而进行。
应用推荐