Then the application of Genetic Algorithms to optimal inverse analysis is discussed.
讨论了遗传算法在优化反演当中的应用。
Therefor the direct displacement inverse analysis is used to calculate the rock parameters for Shibeiling tunnel.
笔者应用位移正演的方法，结合石碑岭隧道这一具体工程进行了岩体参数的反演计算。
Direct method is used in the inverse analysis and the equation of object function is solved with composite algorithm.
反分析采用直接分析法并用复合形法求解目标函数方程。
This paper also studies inverse analysis method of response problem, and identifies stiffness of bearings of lathe spindle.
本文对响应问题逆分析方法进行了研究，并进行了机床主轴轴承刚度识别。
The same deterministic model is used to conduct direct analysis, inverse analysis and the analysis of in situ observation data.
研究工作中正分析、反分析和原位观测资料分析均采用同一的确定性模型。
Based on the artificial neural networks, a inverse analysis method is presented to identify both the magnitude and location of the load on bridge structure.
提出了一种智能桥梁结构的智能计算方案，并利用人工神经网络法，建立一种识别作用在桥梁结构上荷载的力学反分析法，以此初步实现该方案。
For important engineering or important embankment, the method of parameter inverse analysis based on model discerning is used to calculate the embankment's settlement.
对于重要工程或重要地段的软土沉降反演计算，采用基于模型辨识的参数反演方法。
Study on applying the theory of inverse analysis and in-out boundary element method to forecast the pressure of soft rock tunnel 'surrounding rock and supporting deformation.
研究了用反分析理论和内、外边界元方法预测软岩巷道围岩压力和支护变形。
Some damage detection methods such as damage index method, inverse analysis method, pattern identification, novelty detection, are then discussed according to author' s study.
着重讨论了几种常用的损伤检测方法，包括：损伤指标法、反分析法、模式识别法和异常检测法，并结合作者的一些研究进行了比较分析；
Propose and according to characteristic and stage of landslide, adopt different tests, combine the result of the test, inverse analysis and experience data to fix synthetically.
建议根据滑坡的特性及所处的阶段，采用不同的试验，结合试验结果、反算分析和经验数据综合确定。
Because of the complexity of geotechnical engineering, many questions have been come into existence in the application of the displacement inverse analysis for tunnel engineering.
因工程的复杂性，位移反分析在隧道工程中的应用会遇到诸多问题。
To systematically study the whole construction process of pre-stress spatial steel structure, the inverse analysis method based on controlling the initial length of the cable is proposed.
为对预应力空间钢结构的施工成形进行系统的研究，提出了基于控制索原长求解索张拉力的反分析法。
There are three dam researching problems that have been emphasis solved in this paper, which are parameter inverse analysis, seepage field analysis and seepage stress coupled field analysis.
本文重点解决了土坝研究的三大问题：参数反演问题、渗流场分析问题以及渗流场和应力场的耦合问题。
The constitutive equation in the present method is based on flow theory of plasticity to consider the loading history, while deformation theory of plasticity in the classical inverse analysis method.
改进的反向模拟法采用了一种基于塑性流动理论的本构方程，可以充分考虑应变历史对塑性变形的影响。
Based on the qualitative analysis to inverse dynamics of delay system, through modifying conventional fuzzy controller, a new control method which is fit for delay system is presented.
该文在延迟系统逆动力学过程定性分析的基础上，对传统模糊控制器加以改造，提出一种新的适合于迟延系统的控制方法。
Kinetics of robot research dynamics problem and inverse problem of two aspects, the need to adopt strict system method for the analysis of robot dynamics.
机器人动力学主要研究动力学正问题和动力学逆问题两个方面，需要采用严密的系统方法来分析机器人动力学特性。
Inverse design, as later discussed, is its strength; analysis is not - it has none.
反设计，后来谈，是其实力；分析不是-它没有。
In the heat transfer analysis, combining temperature on tire side tested by drum test, a numerical inverse method is described for determining the heat convection boundary on tire side.
热传导分析中，依据实测的轮胎胎侧温度场，提出了一种基于实验的数值反演方法来确定胎侧的对流热边界条件。
Based on modal analysis to piezoelectric smart laminated plates, a finite inverse algorithm of the time history about impact loads by piezoelectric modal respondence is presented.
基于对智能层合板结构的模态分析，提出由结构的压电模态响应反演瞬态荷载时间历程的有限元方法。
Based on modal analysis of piezoelectric smart laminated plates, an FEM based inverse algorithm of the time history of impact loads by piezoelectric modal respondence is presented.
基于对智能层合板结构的模态分析，提出由结构的压电模态响应反演瞬态荷载时间历程的有限元方法。
Theoretical analysis shows that the new deblurring function is the Fourier transform of inverse filtering function.
理论分析证明，此新消模糊函数是逆滤波函数的傅里叶变换。
In this paper, the inverse force analysis of planar three spring system is studied using numerical continuation. All static equilibrium positions of the system is obtained.
将连续法引入机构动力学，研究了平面一般三弹簧系统的静力逆分析，得到了该系统的全部平衡位置。
There is no explicit formulation of inverse mapping about the isoparametric element, so inverse mapping is avoided in finite element analysis.
由于等参元不存在逆变换的显式，所以在有限元分析的列式中都回避等参元逆变换。
Reliable estimates of the anelastic attenuation factor, Q, are desirable for improvement of resolution through inverse Q filter and to facilitate amplitude analysis.
黏弹性衰减因子Q的可靠估计可通过Q反褶积来提高地震资料的分辨率并有助于振幅分析。
The analysis and discussion have been made to the inverse boundary layer, method.
对三维边界层反方法进行了分析和讨论。
With the background of Gatling gun′s cam curve slot and main roller system, dynamics analysis of high speed inverse cylinder cam mechanism was carried out.
以转管武器凸轮曲线槽主滚轮系统为背景，进行了高速反圆柱凸轮机构滚轮动力学分析。
A new parallel mechanism 6-CCS which is composed of cylinder and spherical joints is described in this paper. Configurable analysis and inverse kinematic equations are given.
介绍了一种由圆柱副、圆柱副和球面副组成的点、线约束的新型并联机构6-CCS，对其进行了结构分析，给出了运动学逆解方程。
The results showed a good agreement between the isotherm determined by frontal analysis and inverse method, and the adsorption data which confirmed the validation of the model selected.
实验结果表明：采用前沿分析法和逆向法确定的吸附等温线与吸附数据吻合很好，验证了所选模型的合理性。
The results showed a good agreement between the isotherm determined by frontal analysis and inverse method, and the adsorption data which confirmed the validation of the model selected.
实验结果表明：采用前沿分析法和逆向法确定的吸附等温线与吸附数据吻合很好，验证了所选模型的合理性。
应用推荐