The method of using technic analysis software to solve the technic problems of the assembly line was introduced, it develops a new application field for technic analysis software.
介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。
A method for measuring the dynamic frequency characteristics of a system with 8031 single chip microcomputer was presented, the circuit diagram was given and the software designing was introduced.
提出了用8031单片机及相应接口电路来完成系统动态频率特性测试的方法，给出了硬件的电路原理图，介绍了软件设计。
In the software design, a particular method of counting ESF is provided and other related data handling methods are also introduced.
软件设计方面，提出了一种独特的计算边缘扩展函数的方法，以及各种数据处理的方法。
A method of digital phase moving and frequency synthesizing by using software technique is introduced, it is upon the arbitrary waveform generator, and in the virtual instrumentation mode.
介绍了使用软件方法，在虚拟仪器模式下，用任意波发生器产生精确相移与合成任意频率的周期信号。
A computer automatic testing system of pressure testing machine and the design method of its software were introduced.
介绍了压力试验机的计算机自动测试系统构成及软件设计方法。
A new method of software design for multi-test system based on data-base technology is introduced.
简要介绍了融合现代数据库技术的综合测试系统软件的设计思想和方法。
A method of rapidly constructing industrial robot controller by using PLC is introduced in this paper the method has the advantages of reducing the hardware and software research difficulties.
本文介绍了用PLC快速构造工业机器人控制器的方法。这个方法具有减少硬件和软件研制难度的优点。
This paper introduced the hardware and software of intercepting the data of computer digital communication and a method of interpreting the communication protocol.
介绍了一种截取计算机数字通信数据的硬件电路和软件程序以及破译通信协议的方法。
The design method of a performance test system of automobile water pump based on configuration software is introduced.
介绍一种基于组态软件车用水泵性能测试系统的设计方法。
The paper introduced fundamental principle of SVPWM technology, and gave a SVPWM control method of switching mode of switch determined by hardware based on TMS320F2407A DSP and its software design.
文章详细介绍了SVPWM技术的基本原理，并给出了一种基于TMS320F2407ADSP的由硬件决定开关切换模式的SVPWM控制方法及其软件设计。
A designing method of fuzzy PID controller is given, then an example of how to design and simulate the system by using the software MATLAB is introduced.
讨论了模糊pid控制器的设计方法，同时利用MATLAB软件中的模糊控制工具箱进行了系统的辅助设计与仿真实验。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A formal software development method of using data refinement with two times is introduced, which from data refinement to process refinement then to data refinement.
提出了一种从数据精化、过程精化、再数据精化的两次数据精化的形式化软件开发方法。
The principle and method of the communication between the configuration software and the instrument with a practical object was introduced.
结合一实际对象介绍了组态软件与仪表进行通讯的原理与方法。
The calculation method of infrared photoelectric target for firing dispersion extent is introduced. A high-efficiency software of target measuring system is designed.
介绍了红外光电立靶射击密集度的计算方法，设计了一种高效率的靶场测试软件。
A predictive model of positioning system using predictive control algorithm is presented. The software design method of the positioner based on predictive control theory is introduced.
在预测控制的算法机理上给出了位置控制系统的预测模型，并在此基础上进一步介绍了基于预测控制理论的位置调节器程序的设计方法。
This paper introduced the algorithm process by using point by point comparing method, improved algorithm of interpolation arc, and provided a design method of NC system interpolation software.
本文介绍了逐点比较法插补圆弧的运算过程，并对逐点比较法插补圆弧的算法进行了改进，为数控系统插补软件的设计提供了参考。
A new method to construct acoustic emission (AE) test system and the way to solve key problems of the hardware and software are introduced.
文章提出了多通道全波形声发射检测系统的构建方法，重点描述了系统软、硬件设计中的关键问题及其解决方法。
The working principle, algorithm analysis and software design method of a simplified V. 23 2fsk modem based on DSP which is a kind of programmable chip are introduced in this article.
介绍了简易v .23二进制频移键控(2fsk)调制解调器的工作原理、算法分析以及基于可编程器件DSP的软件设计方法。
A universal method of intelligent identification was introduced. Basing on the method, the intelligent analysis software of planar combined mechanism was developed.
介绍了一种具有普遍意义的机构智能化识别方法，以及以该方法为基础开发的平面组合机构智能分析软件。
A method of measuring the speed of revolution is introduced, and the realization of software and hardware based on PCL-818L is put forward, which is proved feasible by experiment.
简述了测量转速的一种方法，并提出基于PCL- 818l测试该指标的软、硬件实现，实验结果表明本测试系统是可行的。
A hardware design project concerning fuzzy in temperature control system based on DSP was introduced, emphasizing the importance of the software method applied to the fuzzy-PID controller.
介绍了基于DSP的恒温模糊控制系统的硬件设计方案，着重介绍模糊pid控制器的软件实现方法。
A method to evaluate position accuracy of NC machine tools by means of EXCEL software on computer is introduced in this paper.
数控机床位置精度的评价处理方法复杂繁琐，需要处理大量的检测数据。
A software method of preventing the destroy from date-type virus is introduced.
介绍一种通过拨快日历，简单、有效地防止日期型计算机病毒的软件方法。
A new method of node implemented with PIC18F MCU on CAN bus is introduced in this paper. The structure and hardware configure are described, the software design and test principle are discussed.
介绍了一种应用pic 18 F系列单片机片上CAN总线模块实现CAN总线节点的新方法，给出了系统的组成和硬件配置，讨论了系统软件设计和测试原理。
A combustible gas detector based on CAN bus is introduced. The hardware structure of CAN bus intelligent node is given. The combustible gas concentration measurement by software method is described.
介绍了基于CAN总线的可燃气体探测系统成，给出了CAN总线智能节点的硬件构成及浓度检测的软件实现方法。
The principle and control method was introduced, and a design sample of hardware and software applied on variable frequency system was given in this paper.
在介绍其原理与控制方法的同时，并给出了在变频调速中应用的硬、软件设计实例。
Based on FEM software DEFORM 3d, a method for calculating roundness of ring parts by nodes on symmetrical faces was introduced.
以有限元分析软件DEFORM3d为背景，介绍一种利用对称面上的结点计算环件圆度的方法。
The device is a microprocessor-based protection device using 8031 as CPU. The design principle and method of its software and hardware are introduced.
新型装置是以8031为CPU的微机型装置，本文介绍该装置软硬件的设计思想和设计方法。
The device is a microprocessor-based protection device using 8031 as CPU. The design principle and method of its software and hardware are introduced.
新型装置是以8031为CPU的微机型装置，本文介绍该装置软硬件的设计思想和设计方法。
应用推荐