• A new method to calculate and choose the interference fit is introduced.

    提出一种计算选择过盈配合的方法

    www.magsci.org

  • The washer shall be clinched to the stud end with a tight slip fit to an interference fit.

    滑动配合的相互作用力使垫片螺栓。

    www.jxcad.com.cn

  • To prestressed sleeve, prestressed produced through interference fit between sleeve and crack pipeline.

    预应力管道,预应力通过套管裂纹管道过配合方式产生

    zuci.chaziwang.com

  • In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.

    本文采用有限元素方法螺纹面无摩擦力的条件下对过配合螺栓、螺母进行了分析计算

    dict.cnki.net

  • The interference fit between the gate and seat provides bubble tight shutoff even under the lowest pressure.

    即使最低管线压力下,闸板阀座之间配合也能够实现气泡密封功能。

    www.h6688.com

  • The friction between the shell back and bearing housing surface has an effect on the reliability of interference fit.

    轴瓦座孔表面摩擦系数将影响过盈配合可靠性

    dict.cnki.net

  • A reliability analysis method on the fatigue lives of interference fit or coldworking strengthened parts is presented.

    提出了一种处理钉孔挤压强化干涉配合强化后元件疲劳寿命可靠性分析方法

    dict.cnki.net

  • We can accurately pick out the interference fit we need by using the two choosing ways above mentioned comprehensively.

    通过上述两种选择方法综合运用,能够准确合理地选择所需过盈配合

    www.chemyq.com

  • The rotor shall have an interference fit to the shaft and the rotating assembly shall be dynamically balanced to ISO 1940, G. 6.3.

    定子应该通过压配合结合一起,旋转总装动态平衡应该符合ISO 1940, G.6.3标准。

    www.h6688.com

  • The locknut torque needed to move the washer at the maximum washer interference fit shall not exceed the torques given in Table 3.

    紧螺母扭矩压紧垫片时,其与垫片最大相互作用力不能超过3所扭矩值。

    www.jxcad.com.cn

  • It presents the principle and the construction of hydraulic mounting and dismounting, and the calculation of hydraulic interference fit.

    本文介绍液压安装锥度配合原理结构、安装技术有关参数计算

    dict.cnki.net

  • Cylindrical bore bearing is usually installed with heat, reduce the use of interference fit bearing clearance, or achieving the purpose of pretension.

    圆柱轴承通常采用利用过盈配合减小轴承游隙或者达到预紧目的

    www.gzwoen.com

  • Using the method and the programs not only can calculate reliability of interference fit, but can notably raise it by optimization for interference quantity.

    方法程序不仅可以对过联接可靠度进行分析,而且可以对过盈量进行优化,有效地提高配合系统的可靠度。

    dict.cnki.net

  • The pressure distribution on the surface of interference fit of retaining ring and rotor body is calculated by both finite element method and analytical method.

    本文采用有限元数值方法理论解析方法,转子本体配合面上压力分布做了分析计算

    dict.cnki.net

  • These formulas contribute to design the interference fit for the high speed spindle, improve the kinematical performance and the machining performance of the spindle.

    上述公式推导有助于高速主轴过盈联结设计提高主轴的运动特性加工特性。

    dict.cnki.net

  • Three quenched bushes are pressed on the hollow spindle (sleeve) with a big interference fit, thus the spindle can move forward and backward precisely within the bush.

    三个干涉配合淬火压装空心(镗套)上,因此主轴前后精确移动

    www.jxcad.com.cn

  • For a high speed motorized spindle, the interference fit between the shaft and bearing has a great influence on the stiffness, rotary accuracy and life of the spindle.

    高速主轴轴承转轴配合量大小对主轴的刚度旋转精度使用寿命具有十分重要影响

    www.dictall.com

  • The interference fit between various column casings and shaft is analyzed by using the virtual contact loading method, and concrete calculating method and program are presented.

    采用虚拟接触载荷模拟分析各种之间过盈配合接触现象,提出具体计算方法与分析程序

    dict.cnki.net

  • The invention also relates to a method and a device for manufacturing the external thread of the sealing pipeline and a thread pair pipe fitting of a guide-type interference fit pipe.

    发明涉及密封管道螺纹制造方法、制造装置以及导入式盈配合管螺纹管件

    ip.com

  • An experimental study was conducted to measure residual stress distribution around cold-expanded fastener holes and interference stress distribution near interference fit fastener holes.

    本文就冷胀孔周残余应力分布测量技术干涉螺接孔周干涉应力分布的测量技术进行实验研究

    www.dictall.com

  • In the interference fit of assembled parts, inner diameter of sleeve-type parts was reduced and outer diameter of whole cover parts was increased by the magnitude of interference effects.

    配合由于配合表面过盈量影响常使装配后套筒零件发生轴类零件内径减小类零件外径增大

    www.gongbaike.com

  • In this paper, the finite element model for calculating interference fit stress is formed by using displacement continuous condition and equal value of force condition on the fitting faces.

    本文利用互相配合弹性体配合表面上位移连续条件等值条件建立了计算过盈应力有限元模型

    dict.cnki.net

  • Spindle is a key unit of the high-speed machine tool, while the interference fit between spindle and motor rotor is one of the most important factors influencing the performance of the spindle unit.

    主轴高速机床核心部件,机床主轴电机转子过盈配合特性是影响主轴性能重要因素

    www.magsci.org

  • In fact, Aerts has shown that many results demonstrating the disjunction effect fit naturally within a model in which quantum interference can play a role.

    实际上Aerts已经展示了很多经过证明隔离效应结果可以很自然的与一个量子干涉作用模型相匹配。

    url.cn

  • Computer room light should be fit, not too bright or too dark, to avoid direct exposure to light in the screen caused interference of light.

    电脑室内光线适宜不可避免光线直接照射荧光屏而产生干扰光线。

    blog.sina.com.cn

  • Results show that in the middle life range the fatigue strength of interference-fit riveting increases by about 25% compared with that of conventional riveting.

    研究结果表明寿命区,干涉配合铆接疲劳强度普通铆接的疲劳强度提高25%。

    dict.bioon.com

  • The most significant benefit caused by the combined strengthen method of interference-fit and cold expanding (I-E) is briefly illustrated.

    简要说明了干涉配合孔(I -E)综合强化方法产生重大技术效益

    dict.cnki.net

  • Interference-fit technology can improve structure joint strength. For composite structures, the key of interference-fit technology is to control interference.

    干涉配合提高接头疲劳寿命,复合材料结构干涉配合连接关键在于干涉量控制

    dict.cnki.net

  • To have an interference or force fit between mating parts, the tolerances must be such as to create a zero or negative allowance.

    为了使配合零件之间具有强制配合公差必须产生允差

    www.mapeng.net

  • To have an interference or force fit between mating parts, the tolerances must be such as to create a zero or negative allowance.

    为了使配合零件之间具有强制配合公差必须产生允差

    www.mapeng.net

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定