Interface signal is necessary on ATE for flight control system equipment.
在飞行控制系统的自动测试中，飞行控制接口信号是必需的。
This means that if a receiver can lock onto an incoming interface signal, then the audio word values are safe.
这意味着，如果一个接收器可以锁定传入接口信号，然后将音频字值是安全的。
The simulator scheme of interface signal is described and the work principles of system's software and hardware are introduced in detail.
论述了飞行控制接口信号的模拟方案，并详细介绍了信号模拟器的软硬件工作原理。
By the way of analyzing the transmit test principle, the model of the first-order filter in allusion to DM interface signal are established;
从分析传导测试原理入手，建立了针对差模干扰信号的一阶滤波器的电路等效模型；
The invention advances a method and device of implementing automatic detection of time sequence of communication interface, containing the steps: receiving interface signal at the detected interface;
本发明提出了一种实现通讯接口时序自动化检测的方法和装置，该方法包含的步骤为：接收被检测接口上的接口信号；
Plus, since the capability is defined digitally in software and signal processing is handled by a programmable computer, AMF JTRS can interface with legacy radios, waveforms and systems.
另外，由于具有数字化软件性能，信号处理由一个可编程计算机完成，AMFJTRS系统可以与传统的无线电、波形和系统相结合。
Because the Python bindings model the logical interface, it is not possible to send a signal without it coming from a service. So this example also creates a service.
由于Python绑定模拟了逻辑接口，所以不可能不通过一个服务来发送信号。
As this signal interface moves to a digital link, or disappears altogether, these traditional metrics no longer apply.
由于该信号接口转向使用数字链路或消失，这些传统的方法已不再使用。
The theory of railway signal detection and process is analyzed and the realizing of the hardware interface software is introduced.
剖析了机车信号检测和处理的理论，并介绍硬件接口部分的软件实现。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
转换过程和数据采集过程通过CS和串行时钟信号进行控制，从而为器件与微处理器或DSP轻松接口创造了条件。
The main characteristics of ADS8344is introduced, and the interface design between ADS8344and TMS320LC545in signal process system of electronic transformer's high-voltage side is given.
文中介绍了ADS8344的主要特点，给出了其在电子式互感器高压侧数据处理系统中与TMS320LC545的接口设计。
Their work principle, control method, interconnection method as well as interface with the outside data terminal and with the physiology numeral signal has detailedly been described.
本文详细描述了它们的工作原理、控制方法、相互连接方法以及与外部数据终端和与生理数字信号的接口。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
The interface circuit may operate without the signal ground connection, but may sacrifice reliability and noise immunity.
接口电路可以在没有连接信号地时工作，但将牺牲可靠性和抗扰度。
The performance parameters, signal output, non-linearity and temperature offset, and interface mode of the sensor are also discussed particularly.
文中对传感器的性能参数、信号输出、非线性及温度补偿、接口方式进行了详细论述。
This mixed mode interface combines the traditional analog sensor signal with a low cost serial digital link to access a transducer electronic data sheet (TEDS) embedded in the sensor.
这个混合模式的接口把传统的模拟传感器信号与低成本的串行数字连接结合在一起，以访问传感器的内嵌的传感器电子数据表（TEDS）。
It has reasonable design, good performance and flexible interface and has the functions of signal monitoring and alarming.
其设计合理、性能完善、接口灵活，并具有完善的信号监测和告警系统。
This paper introduces a multi-athletes heart sound signal telemetry system based on USB interface.
介绍一种基于通用串行总线（USB）接口的多名运动员心音信号遥测系统。
Through the output interface circuit of time-grating sensor, the output signal is converted into the same format of the signal of grate sensor.
并给出了通过将时栅传感器的输出接口转换为光栅传感器系统相同的信号形式。
This example demonstrates the passing of slot functions to a private signal through a non-template interface.
本例演示了通过非模板接口，向私有的信号传递插槽函数。
The signal conversion interface is simple in design, low-cost and offering good real time performance.
该信号转换接口，具有电路设计简单、价格低廉、实时性好的特点。
According to the well logging requirement, the embedded system with 80c196, interface circuit, and the circuit of signal adjusting on the well depth and indicator diagram are designed.
根据测井要求，设计了80c196单片机系统及其外围接口电路，并分别为液面反射波信号和功图信号设计了调理电路。
A design scheme of GP-IB standard interface for microwave program controlled signal source is proposed, and is realized in this microwave signal source.
提出了一个微波程控信号源的GP -IB标准接口的设计方案，并在微波信号源上得以具体实现。
Antenna interface is the interface circuit for the rf transmitting circuit, the signal reception circuit and the probe.
天线接口电路是射频发射电路、信号接收电路与磁体天线的接口电路。
Data acquisition card is the AD interface card, which converts the analogy signal to the digital signal, and transfers the digital signal to the computer.
数据采集卡是一种把外界模拟信号转换成数字信号，并把数字信号输入到计算机系统的一种AD接口卡。
In this paper, the features of high speed digital-to-analog converter ADS803, pins and working way are introduced, and the interface design with digital signal processor TMS320LF2407 is given.
本文介绍了高速模数转换器ads803的性能、引脚和工作方式，并给出了它与数字信号处理器TMS320 LF 2407的接口设计方案。
In this paper, the features of high speed digital-to-analog converter ADS803, pins and working way are introduced, and the interface design with digital signal processor TMS320LF2407 is given.
本文介绍了高速模数转换器ads803的性能、引脚和工作方式，并给出了它与数字信号处理器TMS320 LF 2407的接口设计方案。
应用推荐