Inside the case is a Network Interface Card (NIC).
在这个孔的里面是一个适配器(网卡)。
Lightning securities information network graphic engine compatible interface card.
证券信息引擎兼容图文卡接口。
Configure the NFA to the network interface card (configure an alias using Ethernet card 0).
配置NFA到网络接口卡(使用以太网卡0配置一个别名)。
An interface card to extend the function of general purpose oscilloscope is introduced.
介绍一种用于扩展通用示波器功能的接口卡。
The thesis introduces the virtual spectrum analyzer system based on the IEEE488 interface card.
介绍了基于IEEE488接口卡的虚拟频谱仪系统。
This paper introduces the design and implementation of E1 interface card and drivers of SIPG gateway.
本文介绍了SIPG网关中e1接口板卡及其驱动程序的设计与实现。
The thesis is just about the design and implementation of Gigabit Ethernet Interface Card in Core Router.
本文的研究课题是核心路由器中的千兆以太网接口卡的设计和实现。
The paper introduces the design of the hardware and software about the grating interface card in details.
文章详细介绍了光栅尺接口卡的硬件、软件设计方法。
The interface card that I designed was later added to NSRO's Spacecraft interface Simulator (SIS) systems.
我设计的接口卡后来被研究所的航天器对接模拟系统所使用。
MulticastInterface: the address of the NIC (network interface card) on which the multicast data will be received.
multicastInterface：NIC的地址(网络接口卡)，在其中多播数据将被接收。
The computer is always on the network, ready to send or receive data through its network interface card (NIC).
计算机总是在网络上，预备经过它的网络接口卡片(NIC)送或者接受数据。
The main work of this thesis is to design an intelligent PCI interface card including hardware and driver design.
本文的主要工作是智能化PCI接口卡的设计，包括硬件设计和驱动程序设计。
In this thesis, an interface card which can process the signal of grating sensor and access Ethernet is developed.
本文研制了一种可以实现光栅信号处理和以太网接入功能的光栅传感器接口卡。
The main parts of the FRAMP NIC (network interface card) are a powerful FPGA chip, some interface controllers and buffers.
FRAMP网卡的主要组成部分是一个功能强大的FPGA芯片和一些接口控制器与缓冲器。
We can further reduce the data duplication done by the kernel if the underlying network interface card supports gather operations.
如果底层网络接口卡支持收集操作的话，那么我们就可以进一步减少内核的数据复制。
SYS driver to place the Ethernet Interface Card in promiscuous mode to capture all the packets that travel through the network.
SYS驱动设置以太网接口卡为混杂模式，用来捕获所有网络上的数据包。
In this paper, an optical network interface card with PCI bus peak bandwidth transmission rate has been designed and implemented.
本文设计和实现了具有PCI总线峰值带宽传输能力的光互连网络接口卡。
It also discussed in detail the system's structure, hardware's composing, software's function and principle of CAN interface card.
详细论述了系统结构、硬件组成、软件功能和CAN接口卡的原理。
It is implemented on the host's network interface card and managed by a protected, central policy server located elsewhere on the network.
它在主机的网络插件上实现，并由位于网络的其他地方的受保护的中心策略服务器管理。
The thesis have proposed a project of network interface card based on 32 ARM processor S3C4510B after analyzing in the MAC layer protocol.
论文在分析了MAC层协议的基础上提出了基于32位ARM处理器s3c 4510b的无线网卡设计方案。
Model 7020 Digital I/O Interface Card is employed to switch the digital signals used to set the phone to various operating modes during testing.
利用一块7020型数字I/O接口卡来切换测试期间用以将电话设置为各种工作模式的数字信号。
As a result, the interface card can generate high- precision pulse signals and can be used in detection of quadrature encoder pulse(QEP) signal.
其主要功能是输出高精度的脉冲，对正交编码脉冲信号进行检测。
Change the IP address on the backup server to match that of the original server or add a network interface card with the IP address of the original server.
修改备份服务器上的IP地址以匹配原始服务器的IP地址，或者添加一个网络接口卡，使用原始服务器的IP地址。
This card is made after the data transmitting interface card, long adopted in the memorized measuring and testing technology, is developed and enlarged.
这块接口卡是在存储测试技术中长期使用的数据传输接口卡的基础上加以改进扩充而制成的。
Data acquisition card is the AD interface card, which converts the analogy signal to the digital signal, and transfers the digital signal to the computer.
数据采集卡是一种把外界模拟信号转换成数字信号，并把数字信号输入到计算机系统的一种AD接口卡。
The design of the network interface card completed in our research is presented in detail on hardware and the software supporting lower levels of the protocol.
详细地介绍了本研究所完成的网络接口卡的硬件设计思想及低层协议支持软件的设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
We study and analyze PCI bus protocol and apply PCI9050's interface chip to design the interface card of PCI bus and compile drive software of its interface card.
对PCI总线协议进行了分析和研究，采用PCI9050接口芯片设计了PCI总线接口卡，编写了接口卡的驱动程序。
We study and analyze PCI bus protocol and apply PCI9050's interface chip to design the interface card of PCI bus and compile drive software of its interface card.
对PCI总线协议进行了分析和研究，采用PCI9050接口芯片设计了PCI总线接口卡，编写了接口卡的驱动程序。
应用推荐