Meanwhile, the weld is flat, the interface bonding is good.
同时，焊缝平整规则，界面结合良好。
So it's important to study the interface bonding performance between aluminum alloy liners and composites.
因此，对复合材料和铝合金界面粘结的研究具有重要的意义。
The behavior of interface bonding and anti aggression of both portland cement and alkali slag cement were compared.
比较了碱矿渣水泥和波特兰水泥的界面性能和耐蚀性。
The suitable interface bonding state can improve not only the tensile strength but the impact energy absorbed as well.
合适的界面结合状态不仅可以提高冲击能量，而且拉伸强度也相应提高。
Mixing the polymer into mortar can improve the interface bonding performance between mortar and foamed polystyrene block.
在砂浆中掺加高分子聚合物，以提高砂浆与发泡聚苯板的界面结合性能。
The interface bonding of the fiber can be improved by the surface modification with the liquid-phase oxidation and plasma treatment.
通过液相氧化法、等离子体处理法等各种方法对UHMWPE纤维表面进行处理，可不同程度改善其界面粘结性能。
In the present paper, a new model, a layered composite beam, is presented for determining the interface bonding strength of materials.
本文提出了一个确定层状复合材料界面结合强度的新模型，即由两种材料交替完全粘结在一起的复合梁。
Interface breakage will be the main fracture mechanism if the interface bonding is weak because of the damage during the composites preparation.
在复合材料中由于制备工艺或后期损伤导致的弱结合界面，界面破坏为主要的复合材料破坏机制。
Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined.
对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比，确定了合适的焊接工艺参数。
The effect of silane and titanate coupling agents on the interface bonding state and the mechanical properties of GRPFN (Glass Fiber Reinforced PF Nylon)has been studied.
研究了几种硅烷偶联剂、酞酸酯偶联剂对玻纤增强PF尼龙界面粘结状态和力学性能的影响。
The effects of particle volume fraction, tensile rate and interface bonding strength on the properties of GB/HDPE composites were studied by tensile test and SEM observation.
通过GB／HDPE的拉伸实验和断口形貌分析，研究了颗粒体积分数、拉伸速率、界面强度对GB／HDPE复合材料力学性能的影响。
The good interface bonding can make the aluminum alloy liner and composites deform consistently and it can also improve the anti-fatigue performance of the composites vessels.
界面良好的粘接使铝合金和复合材料形变相协调，能够很好的提高铝合金内衬复合材料高压容器的耐疲劳性能。
To improve the mechanical properties of high modulus carbon fibers, the interface bonding abilities of cyanate ester, epoxy 5228 and epoxy 4211 with carbon fibers were studied.
为提高高模量碳纤维复合材料的力学性能，研究改性氰酸酯、5228、4211与碳纤维结合面结合性能。
How to make classify and recognize echo signal of ultrasonic detection takes information of interface bonding quality is the key and difficulty of ultrasonic detection of thin composite materials.
如何对反映粘接质量的超声检测回波信号进行分类识别，是薄板复合材料超声检测的关键也是难点之一。
Bonding is a feature included with Linux that, as stated earlier, provides a variety of methods for aggregating multiple network interfaces into a single logical interface.
正如前面提到的，绑定(bonding)是Linux中的一个特性，它提供多种将多个网络接口合并为一个逻辑接口的方法。
Ethernet bonding is a useful feature in Linux that provides a variety of methods for aggregating multiple network interfaces into a single logical interface.
以太网绑定是一个有用的Linux特性，它提供多种将多个网络接口合并为一个逻辑接口的方法。
Bonding quality testing of the second interface of well cementation is a difficult problem in oil log-ging.
检测第二界面的固井质量是当今石油测井中的一项技术难题。
Reinforcement and concrete bear loads together by bonding on their interfaces, and interface stress is a discontinuous medium-related mechanical problem.
钢筋与混凝土主要通过界面黏结作用来共同承受荷载，在界面上的受力属于不连续介质的力学问题。
So bonding performance of the interface and internal force translating mechanism between FRP and high strength concrete are crucial in FRP strengthening technology.
FRP与混凝土之间通过界面层传递内力，研究界面层的粘结性能和内力传递机理是FRP加固技术的关键。
Wafer pairs with bonding interface being native oxide or thermal oxide have different bonding behavior in the annealing process, which were investigated and compared.
将硅本征氧化层与硅热氧化层两种键合界面在退火过程中的行为进行了理论分析与比较。
The bonding strength of the composite interface is reduced when too low or too high extrusion temperatures are employed.
挤压温度过高或过低导致界面结合强度降低。
The bonding strength of interface can be increased and the shrinkage of patching material reduced when adding 8% fly ash.
掺入8%粉煤灰还可提高界面粘结强度及减少修补材料的收缩。
Some information on the progress of new techniques of nondestructive testing (NDT) applied in solid rocket motor propulsion and de-bonding of multiple interface is discussed in this paper.
文中阐述了无损检测新技术在固体发动机推进剂及多界面脱粘方面取得进展的部分情况。
That defects are mainly in interface of SDB affects bonding strength.
硅键合片的缺陷主要集中在键合界面，键合强度受到很大影响。
Influences of axis inclination, length, clamping Angle of anchorage, roughness and bonding degree of interface on the displacement of anchorage and repose stability of rock mass were explored.
就锚碇体轴线倾角、长度、夹持角、接触界面粗糙度及结合程度对锚碇位移和岩体安息稳定性的影响作了深入探讨。
There was a good bonding between reinforcement and matrix on the stage interface.
台阶界面上增强体与基体结合良好。
It was concluded that the interlaminar tensile strength of the composite is dominated by the bonding strength of the interface between fiber and matrix, not by lay-up orientation.
结果表明：该复合材料层间拉伸强度较少受到铺层取向的影响，而由纤维与基体的界面结合强度所控制。
The powerful stress is big enough to cause plastic strain and plastic flow on the interface which can provide good conditions for bonding.
强大的应力使材料发生塑性变形，产生塑性流动，为界面生成键合强度提供良好的条件；
The interface layer of metallurgical bonding will not induce brittle fracture and will share the ductile SEM fractographs of the substrate.
这种界面冶金结合层并不会引起脆性断裂，具有与基材相同的韧性断口形貌。
The interface layer of metallurgical bonding will not induce brittle fracture and will share the ductile SEM fractographs of the substrate.
这种界面冶金结合层并不会引起脆性断裂，具有与基材相同的韧性断口形貌。
应用推荐