The crane's metal structure intensity calculation and fatigue analysis is a fully complicated problem.
起重机金属结构的强度计算及疲劳分析是十分复杂的问题。
And it's proven that this program can produce accurate results and can be used for vessels' shafting intensity calculation.
通过验证，表明该程序计算结果精确，可用于舰艇轴系强度计算。
This article analyses the effect of motional loading and basic resistance on the intensity calculation of seamless railroad.
本文分析了运动荷重与基础阻尼对铁路无缝线路强度计算的影响。
According to the energy reserves and development intensity calculation, the world fossil energy on average less than one hundred years development time already.
按照目前的能源储量和开发强度测算，世界化石能源平均可开发时间已不足百年。
The influence of different loads on the stress of flange of tower is analyzed. It is thought that the different methods on the intensity calculation should be chosen according to the different loads.
分析了不同载荷对塔设备法兰受力的影响，指出计算承受外载的法兰强度应根据不同的载荷选取不同的方法。
This technology has reduced the calculation intensity, improved the speed of authentication.
该技术降低了节点的计算强度，提高了广播认证速度。
Results indicate that the wave loads must be considered when the hull's longitudinal intensity is checked. The research has value to correlative theory research and engineering calculation.
计算结果表明：校核船体在气泡脉动载荷作用下的总纵强度的同时必须计入波浪载荷的影响，对相关理论研究和工程计算有一定参考价值。
The remaining intensity factors of the pipe are obtained to judge if the wellbore is burn through according to the result of calculation.
根据温度计算结果，获得管道的剩余强度因子，进而判定管壁是否烧穿。
Strengthening method was proposed on this basis, the finite element model of strengthened bus was built and static calculation was carried out to analyze the intensity of strengthened bus.
在此基础上提出加强方案，建立加强车的有限元模型，进行静态计算分析加强车的强度，同时考察加强方案的效果与不足。
The rainfall Intensity Duration Frequency formula is one of the bases in hydrology calculation, and has been of considerable interest to engineers and hydrologists.
降雨公式是水文计算的基本依据之一，也是工程师和水文学家十分关心的问题。
In this paper the intensity and rigidity of the ambulance body structure are calculated by establishing the calculation model for its finite elements and then the results are analyzed.
本文建立了急救车车身结构的有限元计算模型，对车身结构的强度和刚度进行了计算，并对计算结果进行了分析。
But the load calculation and intensity analysis are very important basic work for HAWT design.
而载荷计算和强度分析对于风力机的设计来说是非常重要的基础性工作。
The calculation method of oxygen consumption rate and heat liberation intensity is put forward on actual condition, and influence function of particle size is gained by experiment.
提出了实际条件下煤体放热强度和耗氧速度的计算方法，并通过实验得出了煤体粒度影响函数。
The results show that SPMCP model is simple and accurate in calculation, and it provides a new way to predict the state of rainfall intensity index for the rainy season.
结果表明，叠加马尔可夫链预测方法计算方便，结果准确，可为雨季强度指数状态预测分析提供一种新的途径。
Numerical calculation has been taken for rectangular crack and the distribution of stress intensity factors along the crack edge has been obtained.
对矩形裂纹面进行了数值计算，得到了应力强度因子沿裂纹边界的分布规律。
A calculation method is proposed to determine the crack tip stress intensity factors for sections on the basis of zonal generalized variational principles.
本文应用分区广义变分原理，提出了求解含有裂纹的型材应力强度因子的计算方法。
Because only static intensity and stability analysis is considered and dynamic calculation is usually neglected in design, the problems like heavy vibration and local weak rigidity have appeared.
由于设计时仅进行了静强度和稳定性计算，而没有进行动力计算，在使用过程中出现了有时振动过大、个别部位刚度弱的问题。
The infrared intensity spectrum was obtained from frequencies calculation of the all-trans molecule.
对该分子的频率进行了计算，得到了红外强度谱。
The charge simulation method for the calculation of the electric field intensity in the rod-plate gap is also briefly introduced.
为了进行外加场强的计算，文中还简介了用模拟电荷法计算棒——板间隙场强的方法。
The analytic expression for the spatial screening photovoltaic bright solitons obtained under the weak light intensity agrees well with the results obtained by the numerical calculation.
在弱光强条件下得到了空间屏蔽光伏明孤子的解析解表达式，与运用数值计算的方法所得到的结果十分吻合。
A formula of linewidth calculation based on relation of light intensity versus wavelength is presented and the calculated values are found to agree with experimental results.
介绍了一种根据光强与波长关系来计算线宽的公式，计算结果与实验结果相符。
At first this paper utilized the FEM software ANSYS to build the finite element model of the prototype bus body and carry on static calculation to examine the intensity of the bus body.
本文首先利用有限元分析软件ANSYS，建立原型车车身的有限元模型，进行静态计算检验车身强度。
XRD analysis is discussed on this system, and a method of calculation content of phase content in by X ray diffraction peak intensity is researched.
并对系统进行了X -射线分析，探讨了用x -射线衍射峰强度计算各物相含量的方法。
Based on the calculation of intensity noise spectrum, comparative study of XPM and SRS induced crosstalk is performed analytically and numerically.
在计算强度噪声谱的基础上，研究了互相位调制和受激拉曼散射的相互耦合并用于密集波分复用系统的噪声分析。
The influence of atomic motion, the field structure and intensity of photons on second-order correlation function and two-mode correlation function are obtained by numerical calculation.
通过数值计算分析了原子运动速度、场模结构参数和平均光子数对光场二阶相干度和模间相干度的影响。
Based on fracture mechanics and finite element theory, calculation and analysis stress intensity factor of fiber asphalt chip seal under different conditions.
基于断裂力学和有限元原理，计算分析了纤维沥青碎石封层路面结构在不同条件下的应力强度因子。
By analyzing transmission pathway and mode of VLF radio wave, calculation formula of field intensity is given.
分析甚低频电磁波传播路径与方式，给出场强的计算公式。
In this way, the calculation intensity can be greatly reduced and the accuracy of calculation can be improved.
可以极大地减少计算工作强度，增强计算准确率。
A formula based upon the calculation of relative intensity of fluorescent X-ray is derived and it is relatively simple in application.
同时导出了一个按特征荧光相对强度来计算的公式。其公式在实际应用中更为简便。
A formula based upon the calculation of relative intensity of fluorescent X-ray is derived and it is relatively simple in application.
同时导出了一个按特征荧光相对强度来计算的公式。其公式在实际应用中更为简便。
应用推荐