To switch to cursor positioning mode, the user activates the link, designated by the asterisk (*), following the input field.
为了切换至游标定位模式，用户可以激活链接，由星号（*）标示，接下来就是输入区域。
Other alternative input devices include single switch devices, devices that track head movements, and alternative keyboards for persons with mobility impairments.
其它可选择的设备包括单一切换设备、跟踪头部移动的设备，和用于行动困难的人可选择的键盘。
For example, a device can switch transparently from GPRS on the road to a cheaper WLAN in an Internet cafe for network connectivity, depending on location input from a GPS module.
例如，根据GPS模块的定位输入，设备可以透明地将网络连接从路上的GPRS切换到网吧中更便宜的WLAN。
Otherwise it will switch to the interactive command line mode to gather input.
否则，它会切换到交互式命令行模式。
The command USES the — data switch to tell arq which data to use as input.
命令使用——data开关来告诉arq，哪个数据用作输入。
The model I have tested with PPC Linux is the older, translucent-and-silver version with a switch between the input and output jacks.
我在PPCLinux上测试的模块比较老，它是一个半透明的银色版本，输入输出之间有一个开关。
That makes Mohanty's silicon bar a kind of nanomechanical switch in which the two voltages are inputs representing a 0 and a 1, and the output depends on whether the input is rising or falling.
这就似的Mohanty的硅条成为了一种纳米机械开关，两个输入的电压代表了0和1，输出取决于输入时在上升还是下降。
In addition, you can use the setting, Enable cursor positioning option on input fields, to allow the user to switch from data input mode to cursor positioning mode for input fields.
另外，您可以使用设置，Enablecurs orpositioningoptiononinputfields，来允许用户从数据输入模式切换至游标定位模式。
The palette contains a rich set of options for creating XForms controls, ranging from flow constructs such as switch and repeat, to simple controls such as an XForms input or text area.
选项板包括丰富的XForms控件创建选项，从分支和重复这样的流控制，到 XForms输入和文本区域这样的简单控件。
Switch to the input branches TAB of the fork attribute, as Figure 41 shows, to see the input branch of the fork.
切换到Fork属性的Inputbranches选项卡(如图41所示)，查看Fork的输入分支。
Switch to the input branches TAB of the join attribute, as Figure 43 shows, to see the input branch of the join.
切换到Join属性的Inputbranches选项卡(如图43所示)，查看Join的输入分支。
High power factor at ac input can be achieved by controlling the switch of capacitor charge circuit.
通过对电容器充电回路开关管进行控制，实现交流输入端的高功率因数。
As the video sources are not genlocked, it is not possible to switch seamlessly from one input video to another.
由于视频源并未同步锁定，因此无法从一路输入视频无缝切换到另一路视频。
The digital input can be used in conjunction with an external safety interlock switch.
数字输入可以和外部安全联锁开关联结在一起。
Most switch mainframes can be triggered externally via the trigger input and can send an output trigger pulse when the relay contacts have settled.
大多数开关主机都可通过触发输入进行外部触发，并且在继电器触点稳定之后可输出一个触发脉冲。
A compact lightweight switch offered to monitor vacuum levels, which provide an "object gripped" input to the control system.
小巧轻便真空开关提供的监测水平，提供一个“对象笼罩”输入到控制系统。
A new type of DC switch power which is possessed a DC voltage input and three DC voltage output, and is able to reach higher efficiency has been introduced in this paper.
本文介绍一种新型的直流开关电源，该电源是一种直流电压输入，三种直流电压输出，并能够达到相当高的效率。
The voltage stress of each main switch is only half of the input voltage.
其主开关管的电压应力均为输入电压的一半。
Switch to the "Input Message" TAB on the "Input" page (see Figure 44).
切换到“Input”页面的“InputMessage”选项卡(参见图44)。
Switch point. Connect to input or output of integrated chip.
开关点与集成芯片的输入或输出端连接。
These can be combined with the appropriate input elements when the switch is closed.
当开关闭合时，还会有相应的输入元件。
This means that users must switch between stylus and thumb-board, making for considerably awkward input interactions.
这就意味着使用者要经常在拇指板和手写笔之间换来换去，使得输入起来相当不方便。
A matrix switch can connect any input to any output.
矩阵开关能将任意输入连接至任意输出。
ZVS is achieved for each main switch without any auxiliary circuit. Voltage stress of each main switch is a half of input voltage.
每个主开关电压应力是输入电压的一半，并且全范围实现ZVS而不用附加任何电路。
Its function is to provide a latching switch action upon sensing an input threshold voltage, with reset accomplished by an external clock signal.
它的功能是当感应到输入电压界限时提供一个锁存开关，通过外部时钟信号完成复位。
In a dc-dc converter with a given input voltage, the average output voltage is controlled by controlling the switch on and off durations (ton and toff).
在一个给定了输入电压的直流-直流变流器中，输出的平均电压是通过控制开关的导通和关断时间来控制的。
The design consideration for two dead times is presented to assure that voltage stress for main switches is within half of input voltage and ZVS for each main switch is achieved.
提供了该变换器两个死区时间的设计方法，从而保证了开关电压应力限制在输入电压的一半，同时满足每个开关零电压关断的实现条件。
The design consideration for two dead times is presented to assure that voltage stress for main switches is within half of input voltage and ZVS for each main switch is achieved.
提供了该变换器两个死区时间的设计方法，从而保证了开关电压应力限制在输入电压的一半，同时满足每个开关零电压关断的实现条件。
应用推荐