THYON T24 also has the effect of hardening an ink film without sacrificing gloss or stability.
还可以有效的硬化化油墨膜而不会损失光泽和稳定性。
Chill rolls: Cooling rollers located after a drying oven, to cool the heated ink film causing it to set.
冷却辘:安装在干燥炉之后的一些降温辘,它使受热后的油墨冷却而凝固。
It contains metallic salts and is formulated to dry ink without hindering the trapping properties of the next ink film or to top of it.
它含有金属盐,其配方可使油墨干燥而不妨碍加印于它上面的油墨的牵引特性。
Ink rub: Smears of ink caused when the surface of an abrasive paper, often matt art, rubs against the ink film before it is completely dry.
油墨擦花:具研磨剂的纸,通常是无光粉纸,当它面上的油墨未干而与另一张纸磨擦所造成的擦拭花情况。
Principles and experimental result of removal of photosensitive layer and ink film on used PS plate by plasma chemical method are reported.
报告了利用等离子化学方法除去旧PS版表面感光层和油墨的原理和实验结果。
The UV curing ink film forming time is very short, non-volatile solvent material, so also is environmental friendly and harmless to the body of the ink.
UV墨水固化成膜的时间很短,不挥发溶剂物质,所以也是环保型和对身体无害的墨水。
The stronger cationic of starch, the higher ratio of S:MA help to improve the gray scale, color difference, contour sharpness and uniformity of ink film of end prints.
较强的淀粉阳离子性,较高的S:MA比例有利于最终印品阶调、色偏、轮廓清晰度和墨层匀度的提高。
In traditional way, a proof is to provide a sample or reference, then press operator try to adjust the ink film thickness and dot gain to match it or as close as possible.
对于传统方式,样张是作为参考的依据。然后机长通过调整墨层厚度以及控制网点扩大来尽量接近样张颜色。
The ink is printed directly to the clothing fibers, T-Shirt surface won't have any ink Film on it; it is breathable with adhesion, colorful, and the color doesn't fade after washing.
用于印制的墨水直接与衣服的纤维结合,衣服表面完全无墨水胶膜,透气不沾粘,色彩鲜艳,水洗不褪色。
Mesh wire diameter and woven in a way, that is, plain or Twill, CARDS and membership CARDS produced by the ink thickness of the film has a great effect.
丝网的网线直径和编织的办法,即不不不斜纹还是不不斜纹,差制卡和会员卡制息的油墨膜的薄量有很不小的感化。
This paper investigated the film solidify system of two kinds of silicone, then dealt with the property test of silicone rubber ink by mixing with titanium pigment solvent and other auxiliary.
本文研究了两种硅氧烷的成膜固化体系,在此基础上,配以钛白粉、溶剂及其它助剂,进行了硅橡胶油墨的性能试验。
Usually the cost of printing ink, head loss, by the media, and some film. The figure of waste composition.
通常喷绘的本钱由喷头损耗、墨水、介质、废图和覆膜挂轴等有些构成。
The role of surface treatment is to improve the film surface tension so that it is greater than the ink to the surface tension of the ink and the correct filmogen .
表面处理的作用是提高薄膜的表面张力,使其大于油墨的表面张力,从而达到油墨和薄膜材料的正确结合。
Procurement market, the best thermal transfer film, thermal transfer ink imported white kraft paper and so on.
采购市场最好的热转印膜、热转印墨水牛皮纸进口白纸等。
Technics of LTCC MLB processing using thin film circuit technology, ink-jet printing, laser drilling, and conventional manufacturing methods is introduced.
概述了综合运用薄膜线路技术、喷墨打印技术和激光钻孔技术以及采用常规技术制作LTCC基板的简要工艺。
Exposure energy will change with different CCL and the thickness of ink, so we must carry on experiment to confirm under-cut degree, exposure ruler limits 7-9 grade remnant film.
曝光能量会因基板及油墨厚度的不同而变更,请进行试验以确认侧蚀程度后再认定,曝光尺控制在7 - 9级残膜。
The printing ink is made by uniformly mixing (by mass ratio) 5 portions of heat-sensitive color-changing powder and 8-10 portions of resin oil. Its plastic facing film is a resin thin film.
印刷油墨由质量比为5份的热敏变色粉和8 ~ 10份的树脂油均匀混合制成、塑料面膜是树脂薄膜。
The invention relates to a printing ink used for a transparent anti-ultraviolet insulating film, an insulating film adopting the same and a fabrication process thereof.
本发明涉及一种应用于透明抗紫外线隔热膜的油墨、采用该油墨的隔热膜及其制作工艺。
At present CPP is used as ink adhesive to produce the ink of BOPP film in China.
目前国内BOPP薄膜的油墨是采用CPP作为油墨粘接剂。
Aqua film: a kind of hand-cut film for screen process printing. Aqua film is adhered to the screen mesh with water. it requires the use of a lacquer-base ink for printing.
水溶菲林:网版印刷所用的一种手工割菲林。用水溶解而粘附网上。印刷时要采用漆基类油墨。
The base plate consists of foam plastic, an ink layer, an adhesive layer, a film layer and a compound flow-casting layer.
所述底板包括有泡塑、油墨层、粘合剂层、薄膜层、复合流延层。
After the ink tube is inserted in the pen head component, the seal film is broken by the convex tube upwards, ink flows into a pen point, and a user can write.
当储墨管插上笔头组件后,凸管顶破封膜,使墨水流向笔尖,即能书写。
Organic gold ink as a new material has used for thick-film technology. It is a homogeneous system.
有机金浆作为一种新材料被应用在厚膜上。
The invention relates to a die used at high pressure forming machine to print mirror plate printing ink plastic film on the mobile phone.
本发明涉及一种高压成型机上的模具,特别涉及一种用于加工手机印有镜面油墨塑料薄膜的高压成型机模具。
The outer casing is pasted with a metallizing plastic film layer with various colors and patterns printed by ink to accomplish the decorative effect of the outer casing.
在外壳上用油墨印刷各种花色图案的金属化塑料薄膜层直接粘贴上,完成了外壳的装饰作用。
It is made from transfer writing paper, printing ink printed on the transfer writing paper and plastic facing film print-coated on the transfer writing paper and printing ink.
它由转写纸、印刷在转写纸上的印刷油墨、印复在转写纸和印刷油墨上的塑料面膜构成。
The solid ink roll be USES in the machine, used for plastics thin film, paper quality etc. material surface prints to make the date of production, batch number... etc marking.
品用途及特点:固体墨轮配套于墨轮机使用,用于塑料、薄膜、纸质等材料表面印制生产日期,批号等标识。
The invention relates to a method to prepare composite band-gap colloidal photonic crystal film through adopting an ink-jet printing method.
本发明涉及使用喷墨打印方法制备复合带隙胶体光子晶体膜的方法。
The invention relates to a method to prepare composite band-gap colloidal photonic crystal film through adopting an ink-jet printing method.
本发明涉及使用喷墨打印方法制备复合带隙胶体光子晶体膜的方法。
应用推荐